PRO System (Epoxy Resin + Hardener)

The PRO system is a high-quality coating and casting epoxy resin. It can be use for coating substrates such as floors and tables. It is also suitable as a sealant for artwork, tables and worktops. It is perfect to make jewellery and small decorative objects. The PRO system can be mixed with all our colour pigments.

1. Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0,2-0,5mm). To do so, simply use a portion of the same clear epoxy resin (to prime floors and other coloured substrates we recommend using our water-based epoxy resin EPOXY PRIMER system).
2. Mix the PRO resin A-component with the PRO hardener B-component in a ratio of 2:1 (e.g. 2kg resin: 1kg hardener).
3. Stir through the edge and bottom of the mixing cup as the material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
4. Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product can start to boil in the mixing cup.
5. Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide. Let the primer cure.
6. You can find more detailed information in our information table under the “Learn more” button on this product page.
7. Continue with the main coating in the same way. If you select a colour on this product page, you will receive dyes or colour pigments in addition to the resin and hardener.
8. To colour the main coating, mix the supplied colour with the resin A-component or with the resin-hardener mixture. Adjust the colour intensity individually by adding more or less colour pigments.

Info: Epoxy resin is sensitive to any kind of moisture during curing (risk of amine blush formation, i.e. white patches in the top layer). For this reason, we recommend that you avoid any contact between water and the epoxy until it has cured completely (at least 7 days). For thin layers, cold temperatures (ambient, substrate, and resin temperatures below 20°C) and increased humidity, the time until the epoxy resin is fully cured may be extended.

Determine the required amount of resin needed with the help of our epoxy resin “Epoxy calculator” on this product page.

Recommended thicknesses when coating floors and other surfaces

• Overall coating (primer + main coating): approx. 1,65-2,20kg/sqm for layer thicknesses of 1,5-2mm
• Primer: approx. 0,22-0,55kg/sqm for layer thickness of 0,2-0,5mm
• Main layer: approx. 1,10-1,65kg/sqm for layer thicknesses of 1-1,5mm

Recommended amount of colouring agent per kg of resin+hardener:

• Powder pigments (Metallic, Neon and Glow in the dark): 1,5% (15g),
• Transparent dyes (except white, black and grey): 60 drops (1,8g),
• Transparent white, black and grey dyes: 20 drops dye (0,6g),
• Semi-transparent dyes (except white): 40 drops (1,2g) of the desired colour and 20 drops (0,6g) of white dye,
• Semi-transparent white: 60 drops of white dye (1,8g),
• RAL solid colour: 1% (10g),
• Glitter pigments: 1% (10g)

Customer Service: If you have further questions, please contact us by phone, e-mail or use our WhatsApp support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.