Claims (2)
1. อุปกรณ์เสริมเพื่อเพิ่มความคล่องตัวของอาวุธปืนลูกซองยาวเดี่ยวกึ่งอัตโนมัติ ประกอบด้วย ลำตัวส่วนกลาง มีไกปืน(1)สำหรับรองรับการเหนี่ยวไกขระยิง โดยยึดติดด้วยสลักยึด(2)ติดตั้งอยู่ภายในด้านปืน(3)สำหรับรองรับการจับด้วยมือข้างหนึ่งขระทำการ ยิงโดยมีสปริงไกปืน(4)ทำหน้าที่ในการดันส่งให้ไกปืนกลับสู่ตำแหน่งเดิมเมื่อผู้ยิงเหนี่ยวไกยิง และประกอบชุดสะพานไกปืน(5)เป็นตัวส่งแรงไปดันไกปืนตัวเดิมทำให้ปืนลั่นเมื่อผู้ยิงเหนี่ยวไกปืน (1)แล้วนำชุดดังกล่าวติดตั้งอยู่ใต้กระโจมมือ(7)ขันยึดด้วยสกรูยึด(8)ส่วนด้านหน้าของกระโจมมือ (7)สำหรับรองรับการจับด้วยมืออีกข้างหนึ่งเมื่อจับปืนขึ้นยิงโดยขันยึดชุดลำตัวส่วนกลางทั้งหมดด้วย หลอดต่อกระสุน(9)สำหรับการยึดลำตัวส่วนกลางแล้วยังเพิ่มจำนวนกระสุนให้มากขึ้นได้ตามความ ยาวหลอดกระสุนที่ติดตั้ง และติดตั้งคันห้ามไกปืน(6)เพิ่มขึ้นเพื่อเพิ่มความปลอดภัย ลำตัวส่วนหลังจะประกอบด้วยชุดพานท้ายปืน(10)ที่หล่อจากแม่พิมพ์ปิดทับด้วยยางรองพานท้าย เพื่อลดแรงกระแทกขณะยิงและทำให้ความยาวของปืนลดลง ส่วนบริเวณโกร่งไกปืนเดิมจะถูกปิดทับ ด้วยแผ่นปิดไกปืนเดิม(12)เพื่อป้องกันชุดไกปืนเดิม และเพิ่มความปลอดภัยโดยในโกร่งไกปืนเดิมจะ ติดตั้งด้วยลิ้นดันไกปืน(11)สำหรับทำหน้าที่ดันไกปืนเดิมให้ปืนลั่นเมื่อผู้ยิงเหนี่ยวไกปืน(1)ก็จะส่ง แรงดันผ่านสะพานไกปืน(5)มายังลิ้นดันไกปืน(11ป)ดันไกปืนให้ลั่นหมือนการใช้นิ้วเหนี่ยวไกปืน และยึดลิ้นไกปืน(11)ด้วยสลักยึด(13)ปิดไกปืน(12)ส่วนด้านบนของโครงปืนตรงบริเวณช่องคาย ปลอกกระสุน ก็จะมีแผ่นกันสะเก็ดและเขม่าปืน(15)ติดตั้งอยู่สำหรับป้องกันอันตรายให้กับผู้ยิงเนื่อง การประทับปืนได้เปลี่ยนตำแหน่งจากพานท้ายเดิมมายังโครงปืน ลักษณะพิเศษเฉพาะ อุปกรร์เพิ่มความคล่องตัวของอาวุธปืนลูกซองเดี่ยวกึ่งอัตโนมัติเป็นการสร้้างอุปกรณ์ช่วยยิง เพิ่มขึ้นจากปืนเดิม โดยถอดเปลี่ยนเฉพาะอุปกรณ์ของปืนเดิมเฉพาะภายนอก ส่วนภายใน กลไกปืนยังคงเดิมแต่นำอุปกรร์เสริมที่สร้างขึ้นมาใหม่ไปติดตั้งอยู่ภายนอกตัวปืนในตำแหน่งบริเวณ ส่วนกลางตัวปืนที่ประกอบด้วยชุดลั่นไกปืน โดยในชุดลั่นไกปืน(1)ยึดด้วยสลัก(2)ส่วนปลายบน ของไกปืนจะมีสปริงไกปืน(4)ซึ่งจะมีสะพานไก(5)ยึดติดอยู่โดยชุดดังกล่าวทั้งหมดจะถูกติดตั้งอยู่ ภายในด้ามปืน(3)ส่วนบนที่ออกแบบเป็นลักษณะช่องสำหรับการติดตั้งชุดกลไกทั้งหมดเข้าด้วยกัน รวมถึงคันห้ามไก(6)เพื่อเพิ่มความปลอดภัยอีกชั้นหนึ่ง แล้วนำไปติดตั้งอยู่ใต้กระโจมมือ(7)ขันยึดชุด ลั่นไกปืนเข้ากระโจมมือ(7)ด้วยสกรูยึด(8)โดดยยึดลำตัวส่วนกลางทั้งหมดด้วยหลอดต่อกระสุน(9) ซึ่งทำหน้าที่ล๊อคลำตัวส่วนกลางเข้ากับตัวปืน และเพิ่มจำนวนการบรรจุกระสุนแล้วเชื่อมโยงกลไกการ ยิงไปยังลำตัวส่วนหลังโดยอาศัยวะพานไกปืน(5)เป็นตัวผลักดันไกปืนเดิมโดยมีลิ้นดันไกปืน(11) ซึ่งทำหน้าที่เสมือนนิ้วเหนี่ยวไกเป็นตัวรับแรงผลักดันจากสะพานไกปืน(5)ปิดทับไกปืนด้วยแผ่นปิด ไกปืน(12)ป้องกันไกปืนเดิมให้มีความปลอดภัย และความเสียหายจากแรงกระแทกภายนอกและพาน ท้ายปืน(10)ที่ทดแทนของเดิมมีขนาดที่สั้นลงจากพานท้ายปืนเดิม และจะทำให้ตำแหน่งการประทับ การเล็งปืนเปลี่ยนตำแหน่งมาอยู่บริเวณโครงปืน หรือกระโหลกปืนซึ่งจะแผ่นกันสะเก็ดและเขม่าปืน (15)ติดตั้งอยู่เพื่อป้องกันอันตรายจากสะเก็ดและเขม่าปืนปลิวถูกผู้ยิง การถอดเปลี่ยนชุดกระโจมมือและพานท้ายของปืนเดิมออกแล้วนำอุปกรณ์เสริมที่ประดิษฐ์ ขึ้นมาใหม่ติดตั้งแทน โดยการย้ายชุดลั่นไกปืนที่ประกอบเข้าชุดแล้วไปติดตั้งบริเวณกึ่งกลางของตัวปืน โดยขันล็อคชุดลั่นไกปืนด้วยหลอดต่อกระสุน(9)สะพานไกปืนก็จะโยงไปส่วนชุดพานท้ายปืน(10) เมื่อประกอบอุปกรณ์เสริมทั้งหมดแล้วเสร็จก็จะลดความยาวของปืนลงและเพิ่มความคล่องตัวให้กับ อาวุธปืนดังกล่าวได้1. Accessories to increase the mobility of the weapon, the semi-automatic single-length shotgun consists of a central body. There is a trigger (1) for supporting the trigger of firing. It is fixed by mounting bolts (2) installed inside the gun side (3) for supporting grip with one hand during operation. Fires with a trigger spring (4) to push the trigger back to its original position when the shooter pulls the trigger. And assembly of the trigger bridge (5) is a transmitter to push the original trigger, causing the gun to fire when the shooter pulls the trigger. (1) Then install it under the hand tent (7) Fasten it with mounting screws (8) Front part of the tent. (7) For supporting the grip with the other hand when holding the gun up and down by tightening the entire middle body unit. Tubes per bullet (9) for midsection hold, but can also increase the number of ammunition required. Long bullet tube installed And equipped with an additional trigger bar (6) to increase safety The rear body consists of a molded rear canopy (10) covered with a rubber boot. To reduce the impact while firing and reduce the length of the gun. The old trigger area will be covered. With original trigger cover (12) to protect the original trigger assembly. And increase the safety by in the original strong trigger will It is equipped with a trigger puller (11) for pushing the original trigger for the gun to fire.When the shooter pulls the trigger (1), it sends Pressure through the trigger bridge (5) to the trigger valve (11 mm). Push the trigger to the hand. Using your finger to pull the trigger. And secure the trigger tongue (11) with the retaining pin (13), close the trigger (12), the top of the gun frame, in the area of the casing cavity, there will be a flak and soot shield (15) installed for protection With continuous shot The stamping of the gun changed its position from the original rear plate to the gun frame. Special characteristics Equipment increases the mobility of weapons. Semi-automatic single shotguns are the creation of a shooting aid. Increased from the original gun By removing only the equipment of the original gun, only the external part inside the gun mechanism remains the same, but the newly created accessory is installed outside the gun in the area. The central body of the gun that contains the trigger assembly. In the trigger assembly (1) secured with a bolt (2) on the upper end There is a trigger spring (4), which has a trigger bridge (5) attached, all of which are mounted. Inside the pistol grip (3), the upper part is designed as a compartment for mounting the entire mechanical assembly. Including the trigger bar (6) to add another layer of safety Then installed under the hand tent (7) tighten the set. Strike the trigger (7) with the mounting screws (8) and secure the entire central body with the bullet (9), which locks the middle body onto the gun. And increase the number of reloads and link the mechanism Fires to the rear of the body using the trigger pull (5) as the original trigger pusher, with the trigger pull (11) acting as the trigger finger as the receiver for the thrust from the trigger bridge ( 5) Cover the trigger with a flap. Trigger (12) prevents the original trigger for a secure And damage from external shocks and trays The replacement rear (10) of the gun is shortened from the original rear. And will make the stamping position The aiming of the gun changes its position to the frame of the gun. Or the skull of the gun, which will protect against flakes and gun soot (15) Installed to prevent danger from flying flakes and soot being hit by the shooter Removing the original gun's canopy and tail assembly and removing the fabricated accessories. Come up with a new one instead. By moving the included trigger assembly to install in the center of the gun. By tightening the trigger lock with a tube to the bullet (9), the trigger bridge will be linked to the rear gun assembly (10). When all accessories are completed, the gun length will be reduced and increased mobility Such a firearm.
2. อุปกรณ์เสริมเพื่อความคล่องตัวของอาวุธปืนลูกซองยาวเดี่ยวกึ่งอัตโนมัติตามข้อถือสิทธิข้อ ที่ 1 ซึ่งเป็นการประดิษฐ์อุปกรณ์เสริมขึ้นมาเพื่อเสริมการใช้อาวุธปืนดังกล่าวให้มีความคล่องตัวมาก ขึ้นจากเดิมโดยไม่ต้องตัดหรือแต่งให้เสียหายโดยอาศัยหลักการสร้างอุปกรณ์ในการช่วยจับช่วยยิง ขึ้นมาใหม่ และติดตั้งอยู่ภายนอกตัวปืนเปลี่ยนตำแหน่งการจับปืนขึ้นยิงและการประทับปืนขณะทำการ ยิงในลำตัวปืนส่วนกลางที่ประกอบด้วยกระโจมมือ(7)ด้านใต้กระโจมมือติดตั้งชุดลั่นไกใหม่อยู่ ภายในด้ามปืน(3)เชื่อมโยงสะพานไกปืน(5)ไปยังไกปืนเดิม บริเวณส่วนหลังตัวปืนที่ประกอบด้วย พานท้าย(10)บริเวณด้านหน้า(1)สะพานไกปืน(5)จะทำหน้าที่ส่งแรงดันผ่านดิ้นดันไกปืน(11)ดันไกปืน เดิมให้ปืนลั่น ด้วยนิ้วของผู้ยิง2. Accessories for the versatility of a single, semi-automatic single-length shotgun according to claim No. 1, which is the invention of an accessory to enhance the use of such a firearm to be extremely agile. From the original without cutting or damaging the principle of creating a new grip, assisted firing device and installed outside the gun body, change the gun grip position and stamping the gun during operation. Shoot in the central gun body containing the hand tent (7). Under the hand tent, a new trigger assembly is installed. Inside the grip (3) link the trigger bridge (5) to the original trigger. The area behind the gun that contains The rear axle (10) in front (1), the trigger bridge (5), serves to transmit pressure through the trigger pull (11). Before the gun fired With the finger of the shooter