Claims (8)
ข้อถือสิทธฺ์ (ทั้งหมด) ซึ่งจะไม่ปรากฏบนหน้าประกาศโฆษณา : 1. สายพานร่องฟันที่ประกอบด้วย ส่วนลำตัวเป็นอีลาสโทเมอร์ ฟันอย่างน้อยที่สุดหนึ่งฟันที่ได้รับการก่อรูปจากส่วนลำตัวดังกล่าว เปลือกหุ้มที่ได้รับการจัดวางไว้ตามแนวพื้นผิวส่วนรอบนอกของส่วนลำตัวสายพาน และ ชิ้นประกอบแรงดึงหรือเส้นตีเกลียวเสริมที่ได้รับการฝังไว้ในส่วนลำตัวสายพาน เปลือกหุ้มที่ความ หนาเมื่ออัดขนาด 0.5 มม. ถึงประมาณ 0.8 มม. เส้นตีเกลียวเสริมอย่างน้อยที่สุดหนึ่งส่วนที่ได้รับการฝังไว้ในส่วนลำตัวดังกล่าวและมีเส้น ผ่าศูนย์กลางของเส้นตีเกลียวเสริม เส้นตีเกลียวเสริมอย่างน้อยที่สุดหนึ่งส่วนดังกล่าวและเปลือกหุ้มดังกล่าวมีอัตราส่วนเส้น ผ่าศูนย์กลางเส้นตีเกลียวเสริมดังกล่าวกับความหนาของเปลือกหุ้มดังกล่าวน้อยกว่า 1.8 และเส้นผ่าศูนย์กลางเส้นตีเกลียวเสริมดังกล่าวและความหนาเปลือกหุ้มดังกล่าวเป็น PLD สายพานเชิงแสงขนาดประมาณ 1.2 มม. หรือน้อยกว่า 2. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งเส้นตีเกลียวเสริมอย่างน้อยที่ สุดหนึ่งส่วนดังกล่าวทำมาจากวัสดุเส้นใยที่ได้รับการเลือกจากคาร์บอน PBO และส่วนผสมของ อย่างน้อยที่สุดสองสิ่งที่ได้รับการเลือกจากคาร์บอน แก้ว อะรามิดและ PBO 3. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 2 ซึ่งสายพานดังกล่าวมี PLD เชิง แสงอยู่ในช่วงจาก 0.85 มม. ถึงประมาณ 1.1 มม. 4. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 2 ซึ่งสายพานดังกล่าวสามารถ เกี่ยวประสานได้กับรอกที่มี PLD การออกแบบ และ PLD สายพานดังกล่าวมากกว่า PLD การ ออกแบบดังกล่าวประมาณ 0.09 มม. ถึงประมาณ 0.51 มม. 5. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งเส้นตีเกลียวเสริมอย่างน้อยที่ สุดหนึ่งส่วนประกอบด้วยเส้นใยคาร์บอน และเส้นผ่าศูนย์กลางเส้นตีเกลียวเสริมดังกล่าวอยู่ในช่วง จากประมาณ 0.5 มม. ถึงประมาณ 0.95 มม. 6. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งเส้นตีเกลียวเสริมอย่างน้อยที่ สุดหนึ่งส่วนทำมาจากแกนกลางเส้นใยคาร์บอนตรงกลางที่มีใยแก้วจำนวนหนึ่งที่ได้รับการจัดวาง รอบแกนกลางดังกล่าว 7. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งเส้นตีเกลียวเสริมอย่างน้อยที่ สุดหนึ่งส่วนเป็นองค์ประกอบเส้นใยคาร์บอนที่ได้รับการเลือกจาก 12K-1, 6K-2, 3K-4, 6K-1 และ 3K-2 8. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งเปลือกหุ้มดังกล่าวมีความ หนาเกจเมื่ออัดประมาณ 0.57 มม. ถึงประมาณ 0.75 มม. 9. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งเส้นผ่าศูนย์กลางเส้นตีเกลียว เสริมดังกล่าวมากกว่า 0.85 มม. หรือมีอัตราส่วนของเส้นผ่าศูนย์กลางเส้นตีเกลียวเสริมดังกล่าว ต่อความหนาเปลือกหุ้มดังกล่าวน้อยกว่าประมาณ 1.5 หรือทั้งสองอย่าง 1 0. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 9 ซึ่งเส้นตีเกลียวเสริมประกอบ ด้วยวัสดุเส้นใยที่ได้รับการเลือกจากคาร์บอน PBO อะรามิด แก้ว แก้วกำลังสูง และส่วนผสมของ สารดังกล่าวข้างต้น 1Disclaimer (all) which will not appear on the advertisement page: 1. Tooth belt containing The body is an elastomer. At least one tooth that has been formed from that body segment. The enclosures are positioned along the periphery surface of the body section, the belt, and the tension elements or reinforced strands embedded in the belt body section. Protective shell Thickness when extruded from 0.5 mm to approx. 0.8 mm in diameter, at least one additional strand has been embedded in the said body section and strands. Cut the center of the strand. At least one of the above reinforced strands and the sheath has a strand ratio. The diameter of the reinforced strand is less than 1.8 mm and the diameter of the aforementioned reinforced strand and the sheath thickness is PLD, an optical belt of approximately 1.2 mm or less. Teeth, as specified in claim 1, where at least the twine reinforces One of these is made from a fiber material that has been selected from carbon, PBO and a blend of At least two are chosen from carbon, glass, aramid and PBO 3. The toothed belt, as stated in claim 2, such belts have optical PLDs in the range from 0.85 mm. Up to approx 1.1 mm. 4. Toothed belt as specified in Clause 2, which can It is possible to interlock with pulleys with a design PLD and a PLD. The belt is approximately 0.09 mm to approximately 0.51 mm thick than the aforementioned PLD. Twisted, at least The most part is made up of carbon fibers. And the diameter of the aforementioned reinforced strands ranges from approximately 0.5 mm to approximately 0.95 mm. 6. The flute belt as specified in claim 1, where at least the additional strand is The top one is made from a central carbon fiber core with a number of glass fibers positioned. 7. The toothed belt as specified in Clause 1, where the strand is reinforced at least at At the end of the section, the carbon fiber elements are selected from 12K-1, 6K-2, 3K-4, 6K-1 and 3K-2. Such covers have The thickness of the gauge when compressed is approximately 0.57 mm. To approximately 0.75 mm. 9. The toothed belt as specified in Clause 1, the strand diameter. The said supplement is greater than 0.85 mm, or the ratio of the strand diameter is 1 0. The toothed belt as described in Clause 9, where the reinforced strand constitutes With fiber material selected from carbon, PBO, aramid, high-strength glass and a mixture of Substances mentioned above 1
1. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 1 ซึ่งอัตราส่วนเส้นผ่าศูนย์กลาง เส้นตีเกลียวเสริมดังกล่าวกับความหนาของเปลือกหุ้มดังกล่าวน้อยกว่าประมาณ 1.5 11. The toothed belt as specified in Clause 1, the diameter ratio The reinforced strand with the thickness of the sheath is less than approximately 1.5 1.
2. สายพานร่องฟันดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 11 ซึ่งเส้นตีเกลียวเสริมประกอบ ด้วยวัสดุเส้นใยที่ได้รับการเลือกจากคาร์บอน PBO อะรามิด แก้ว แก้วกำลังสูง และส่วนผสมของ สารดังกล่าวข้างต้น 12. The toothed belt as specified in Clause 11, which is reinforced by twine. With fiber material selected from carbon, PBO, aramid, high-strength glass and a mixture of Substances mentioned above 1
3. ชุดประกอบสายพานสมวารที่ประกอบด้วยตัวขับรอกหมุนตามเป็นอย่างน้อยที่สุด ที่มี PLD การออกแบบที่ได้รับการกำหนดไว้ก่อนหน้า และสายพานร่องฟันที่ขับแบบเกี่ยว ประสานกับรอกดังกล่าว สายพานร่องฟันดังกล่าวประกอบด้วย ส่วนลำตัวสายพานเป็นอีลาสโทเมอร์ เส้นตีเกลียวเสริมแรงดึงที่มีเส้นผ่าศูนย์กลางหนึ่ง เปลือกหุ้มที่มีความหนาเมื่ออัด และ PLD เชิงแสงของสายพาน ซึ่งอัตราส่วนของ PLD สายพานต่อ PLD การออกแบบอยู่ในช่วงจากประมาณ 1.2 ถึง ประมาณ 1.75 และ อัตราส่วนเส้นผ่าศูนย์กลางเส้นตีเกลียวเสริมกับความหนาของเปลือกหุ้มอยู่ในช่วงจาก ประมาณ 0.7 ถึงประมาณ 1.7 13. Equivalent belt assembly containing a minimum follow-up pulley drive with a predetermined design PLD. And the belt drive groove Synchronize with such pulleys The tooth belt consists of As for the body, the belt is an elastomer. Tensile reinforced strand of one diameter. The compression shell and optical PLD of the belt Where the ratio of belt PLD to design PLD ranges from approximately 1.2 to approximately 1.75, and the reinforced strand diameter ratio to shell thickness ranges from approximately 0.7 to approximately 1.7 1.
4. ชุดประกอบสายพานสมวารดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 13 ซึ่งอัตราส่วนของ PLD สายพานต่อ PLD การออกแบบอยู่ในช่วง 1.24 ถึงประมาณ 1.75 และ อัตราส่วนของเส้นผ่าศูนย์กลางเส้นตีเกลียวเสริมต่อความหนาเปลือกหุ้มอยู่ในช่วงจาก ประมาณ 0.7 ถึงประมาณ 1.5 14.Somal belt assembly, as described in Clause 13, where the ratio of belt PLD to design PLD ranges from 1.24 to approximately 1.75, and the ratio of reinforced strand diameter to shell thickness ranges from Approximately 0.7 to approximately 1.5 1
5. ชุดประกอบสายพานสมวารดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 14 ซึ่งอัตราส่วนของ PLD สายพานต่อ PLD การออกแบบอยู่ในช่วง 1.24 ถึงประมาณ 1.6 และ อัตราส่วนของเส้นผ่าศูนย์กลางเส้นตีเกลียวเสริมกับความหนาเปลือกหุ้มอยู่ในช่วงจาก ประมาณ 1.0 ถึงน้อยกว่าประมาณ 1.5 15.Somarial belt assembly as described in Clause 14, where the ratio of belt PLD to design PLD ranges from 1.24 to approximately 1.6 and the ratio of the reinforced strand diameter to the shell thickness ranges from Approximately 1.0 to less than about 1.5 1
6. ชุดประกอบสายพานสมวารดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 14 ซึ่งเส้นตีเกลียว เสริมประกอบด้วยวัสดุเส้นใยที่ได้รับการเลือกจากคาร์บอน PBO อะรามิด แก้ว แก้วกำลังสูง และ ส่วนผสมของสารดังกล่าวข้างต้น 16. Sompara belt assembly as specified in Clause 14, which is twisted. Complementary consists of fiber materials selected from carbon, PBO, aramid, glass, high-strength glass and a mixture of the aforementioned 1.
7. ชุดประกอบสายพานสมวารดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 13 ซึ่งเส้นตีเกลียว เสริมประกอบด้วยวัสดุเส้นใยที่ได้รับการเลือกจากคาร์บอน PBO และส่วนผสมของสารอย่างน้อย ที่สุดสองชนิดที่ได้รับการเลือกจากคาร์บอน แก้ว อะรามิด และ PBO 17. Sompara belt assembly as described in Clause 13, which is twisted. The supplement contains a fiber material that has been selected from carbon, PBO and at least a blend of compounds. Two of the best were chosen from carbon, aramid glass and PBO 1.
8. ชุดประกอบสายพานสมวารดังที่ได้ระบุไว้ในข้อถือสิทธิข้อ 13 ซึ่งเส้นตีเกลียว เสริมประกอบด้วยเส้นใยคาร์บอน และเส้นตีเกลียวเสริมมีจำนวนนับของฟิลาเมนท์เส้นใยคาร์บอน จากประมาณ 1K ถึงประมาณ 48K8.Somvara belt assembly as specified in Clause 13 which is twisted Reinforced with carbon fibers And the reinforced twine has a count of carbon fiber filament from about 1K to about 48K.