Claims (5)
1. เครื่องมือเก็บตัวอย่าง ประกอบด้วย ส่วนปลอก ที่มีลักษณะเป็นท่อกลวงรูปทรงกระบอก ปลายมีลักษณะเป็นปลาย เปิด โดยปลายด้านใดด้านหนึ่ง ยึดติดกับด้ามจับ ปลายด้านที่เหลือเป็นปลายตัดตรง ที่ ซึ่งผิวด้านนอกของปลายดังกล่าวปาดให้บาง ลักษณะการปาดคือ ปาดจากผิวด้านนอก โดยรอบในระยะก่อนถึงขอบของปลาย เฉียงไปถึงผิวด้านในที่ขอบของปลายดังกล่าว ส่วนเจาะนำ ที่มีลักษณะเป็นแท่ง ตัน รูปทรงกระบอก ปลายด้านใดด้านหนึ่ง ยึดติดกับด้ามจับ ปลายด้านที่เหลือมีลักษณะเป็นปลายแหลม (trocar point) ส่วนเก็บตัวอย่างกระดูก ที่มีลักษณะเป็นท่อกลวงรูปทรงกระบอก ปลายมี ลักษณะเป็นปลายเปิด โดยปลายด้านใดด้านหนึ่งยึดติดกับด้ามจับ ขอบของปลายด้าน ที่เหลือบากเป็นฟันเลื่อยขนาดใหญ่โดยรอบ ซึ่งฟันเลื่อยดังกล่าวประกอบด้วยปลาย แหลมที่ใช้ในการเจาะกระดูก และจากปลายแหลมดังกล่าวถึงร่องของฟันเลื่อยเป็น ส่วนตัด ที่ซึ่งแนวขอบของส่วนตัดดังกล่าวถูกปาดให้บางและคม เพื่อใช้ในการเลื่อยตัด กระดูก ส่วนเก็บตัวอย่างเนื้อเยื่ออ่อน มีลักษณะเป็นท่อกลวง รูปทรงกระบอก ปลายมี ลักษณะเป็นปลายเปิด โดยปลายด้านใดด้านหนึ่งยึดติดกับด้ามจับ ปลายด้านที่เหลือ ปาดให้มีลักษณะเป็นปลายแหลม โดยในระยะก่อนถึงปลาย ให้ปาดจากผนังด้านใด ด้านหนึ่งเฉียงเข้าสู่ภายในท่อ เมื่อปาดในระยะก่อนถึงผนังด้านตรงข้ามให้ปาดโค้งลง ไปตามความยาวของท่อ แล้วจึงปาดเฉียงเข้าสู่ผนังด้านตรงข้ามไปจนถึงผิวด้านนอก ทำ ให้ปลายมีลักษณะเป็นปลายแหลม 2. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1 ที่ซึ่งเพิ่มเติมด้วย ส่วนแยกตัวอย่าง กระดูก 3. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 2 ที่ซึ่ง ส่วนแยกตัวอย่างกระดูก ดังกล่าวมีลักษณะเป็นแท่ง ตัน รูปทรงกระบอก มีความกว้างที่เพียงพอให้สามารถสอด ส่วนแยกตัวอย่างกระดูกดังกล่าวเข้าสู่ภายในท่อของส่วนเก็บตัวอย่างกระดูกได้ ปลาย ด้านใดด้านหนึ่งยึดติดกับด้ามจับ ปลายด้านที่เหลือเป็นปลายตัดตรง 4. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-3 ข้อใดข้อหนึ่ง ที่ซึ่งเพิ่มเติมด้วย ส่วนเก็บและแยกตัวอย่างเนื้อเยื่ออ่อน 5. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 4 ที่ซึ่ง ส่วนเก็บและแยกตัวอย่าง เนื้อเยื่ออ่อนดังกล่าว มีลักษณะเป็นแท่ง ตัน รูปทรงกระบอก มีความกว้างที่เพียงพอให้ สามารถสอดส่วนแยกตัวอย่างเนื้อเยื่ออ่อนดังกล่าวเข้าสู่ภายในท่อของส่วนเก็บตัวอย่าง เนื้อเยื่ออ่อนได้ ปลายด้านใดด้านหนึ่งยึดติดกับด้ามจับ ปลายด้านที่เหลือเป็นปลาย แหลม (trocar point) 6. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 4 หรือ 5 ที่ซึ่ง ส่วนเก็บและแยก ตัวอย่างเนื้อเยื่ออ่อน ดังกล่าวที่ผิวด้านนอกก่อนถึงปลายของส่วนเก็บและแยกตัวอย่าง เนื้อเยื่ออ่อน ถูกบากให้เป็นร่อง โดยให้ช่วงของรอยบากดังกล่าวมีระยะที่ เพียงพอให้ สามารถจับตัวอย่างเนื้อเยื่ออ่อนไว้ได้ 7. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 6 ที่ซึ่ง รอยบากดังกล่าวมีลักษณะ เป็นร่องตามขวางหรือเป็นร่องเกลียว 8. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-7 ข้อหนึ่งข้อใด ที่ซึ่งแนวขอบ ของส่วนตัดดังกล่าวถูกปาดในลักษณะ ปาดจากผิวด้านนอกในระยะก่อนถึงขอบของ ส่วนตัด เฉียงเข้าสู่ผิวด้านในที่ขอบของส่วนตัด เพื่อให้ขอบส่วนตัดบางและคม 9. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-8 ข้อหนึ่งข้อใด ที่ซึ่งส่วนเก็บตัวอย่าง กระดูกดังกล่าว ที่ผิวด้านในของปลายด้านที่ถูกบากเป็นฟันเลื่อยดังกล่าว ถูกบากให้เป็น ร่อง โดยให้ช่วงของรอยบากดังกล่าวมีระยะที่เพียงพอให้สามารถจับตัวอย่างกระดูกไว้ ได้ 1 0. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 9 ที่ซึ่ง รอยบากดังกล่าวมีลักษณะ เป็นร่องตามขวางหรือเป็นร่องเกลียว 1 1. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-10 ข้อหนึ่งข้อใด ที่ซึ่งส่วนเก็บตัว อย่างเนื้อเยื่อดังกล่าว ที่ผิวด้านในของปลายด้านที่ถูกบากเป็นปลายแหลม ถูกบาก ให้เป็นร่อง โดยให้ช่วงของรอยบากดังกล่าวมีระยะที่เพียงพอให้สามารถจับตัวอย่าง เนื้อเยื่ออ่อนไว้ได้ 1 2. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 11 ที่ซึ่ง รอยบากดังกล่าวมีลักษณะเป็นร่อง ตามขวางหรือเป็นร่องเกลียว 1 3. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-12 ข้อหนึ่งข้อใด ที่ซึ่งส่วน ประกอบ ที่เลือกได้จากหรือทั้งหมดของ ส่วนเจาะนำ ส่วนเก็บตัวอย่างเนื้อเยื่ออ่อน ส่วนเก็บตัวอย่างกระดูก มีความกว้างที่เพียงพอให้สามารถสอดส่วนประกอบดังกล่าว เข้าสู่ภายในท่อของส่วนปลอกได้ 1 4. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-13 ข้อหนึ่งข้อใด ที่ซึ่งส่วนปลอก หรือ ส่วนเก็บตัวอย่างกระดูกดังกล่าว ที่ผิวด้านนอกมีรอยบากเป็นเส้นตามขวางอย่าง น้อยหนึ่งเส้น โดยบากเรียงไปตามความยาวของส่วนปลอกดังกล่าวหรือส่วนเก็บตัว อย่างกระดูกดังกล่าว เพื่อกำหนดความลึกของการเก็บตัวอย่าง 1 5. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-14 ข้อหนึ่งข้อใด ที่ซึ่งด้ามจับดัง กล่าวมีลักษณะเป็นท่อ กลวง รูปหกเหลี่ยม ปลายด้านใดด้านหนึ่งเป็นปลายเปิด 1 6. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-15 ข้อหนึ่งข้อใด ที่ซึ่งปลายของ ส่วนประกอบ ที่เลือกได้จากหรือทั้งหมดของ ส่วนปลอก ส่วนเจาะนำ ส่วนเก็บตัวอย่าง เนื้อเยื่ออ่อน ส่วนแยกตัวอย่างกระดูก ส่วนเก็บและแยกตัวอย่างเนื้ออ่อน ในด้าน ที่ยึดติดกับด้ามจับ ยึดติดเข้ากับท่อในด้านปลายเปิดของด้ามจับดังกล่าว 1 7. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 15 หรือ 16 ที่ซึ่งด้ามจับของส่วน ประกอบที่เลือกได้จากหรือทั้งหมดของ ส่วนปลอก ส่วนเก็บตัวอย่างกระดูก ส่วนเก็บ ตัวอย่างเนื้อเยื่ออ่อน มีลักษณะเป็นปลายเปิดทั้งสองด้าน 1 8. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-17 ข้อหนึ่งข้อใด ที่ซึ่งท่อของ ด้ามจับดังกล่าวสามารถเชื่อมต่อไปสู่ท่อของส่วนประกอบที่เลือกได้จากหรือทั้งหมด ของ ส่วนปลอก ส่วนเก็บตัวอย่างกระดูก ส่วนเก็บตัวอย่างเนื้อเยื่ออ่อน ได้ 1 9. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-18 ข้อหนึ่งข้อใด ที่ซึ่งด้ามจับดัง กล่าว ยึดติดกับปลายด้านใดด้านหนึ่งของแท่งจับอย่างน้อยหนึ่งแท่ง 2 0. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 19 ที่ซึ่ง แท่งจับดังกล่าว ยึดติดกับ ด้ามจับดังกล่าวในแนวฉากกับความยาวของเครื่องมือเก็บตัวอย่างดังกล่าว 21. The sampling apparatus consists of a hollow, cylindrical casing. The ends are open with one end. Attaches to the handle The other end is the cut end where the outer surface of the tip is thinned. The cutting characteristics are Scrape off the outer surface Around in the period before the edge of the tip Oblique to the inner surface at the edge of the tip. The pilot drill is solid, cylindrical at either end. Attaches to the handle The remaining end is pointed (trocar point). Bone sampling area. That looks like a hollow tube, cylindrical, open end. With one end attached to the handle Edge of the end The rest of the notch is a large sawtooth surrounding it. In which the saw tooth consists of a tip Spikes used to pierce bones And from the aforementioned pointed end to the groove of the saw tooth is a cross section where the edges of the cross section are cut thin and sharp. For use in sawing, cutting soft tissue samples. It is a hollow, cylindrical tube with an open end. With one end attached to the handle The rest end Cut to have a sharp point By in the pre-term period To wipe from any wall One side slopes into the pipe. When cutting in the distance before reaching the opposite wall, wipe down the curve. Along the length of the pipe Then slashed diagonally onto the opposite wall to the outer surface, resulting in a sharp tip. 2. Sampling apparatus according to claim 1, which was added. 2. Bone sampling apparatus 2. Clause sampling apparatus in which the bone sample was separated. They are solid, cylindrical, and wide enough to be inserted. The split of the bone sample can enter the inside of the bone sample tube. One end is attached to the handle. The remaining ends are straight-cut ends. 4. The sampling apparatus according to one of the claims 1-3. Where additionally Soft tissue sample collection and separation 5. Sampling apparatus according to claim 4 where the sample collection and separation area Such soft tissue It is a solid bar, cylindrical shape with sufficient width to The soft tissue specimens can be inserted into the inside of the sampling tube. Soft tissue One end is fixed on the handle. The remaining end is pointed (trocar point). 6. The sampling apparatus according to claim 4 or 5, where the collection and separation area. Soft tissue samples This is done at the outer surface before the end of the collection and separation chamber. Soft tissue Notched The range of the incision is sufficient for the soft tissue sample to be captured. 7. Sampling instrument according to claim 6, where the notch is characterized A transverse groove or a spiral groove. 8. Any one of the sampling apparatus according to claims 1-7. Where the border Of the cross-section is cut in a manner Run from the outer surface before the edge of the oblique cut into the inner surface at the edge of the cut. So that the cutting edge is thin and sharp 9. Any of the sampling tools according to the claims 1-8. Where the sampling area Such bone On the inside surface of the end that is notched is such sawtooth. The incision was notched, so that the range of the incision was sufficient to hold the bone sample. 1 0. Sampling apparatus according to claim 9, where the notch was characterized A transverse groove or a spiral groove 1 1. Any of the sampling apparatus according to claims 1-10. Where the introvert Like such tissues The inner surface of the notched end is notched so that the range of the notch is sufficient to capture the sample. Soft tissue 1 2. The sampling apparatus according to claim 11 where the incision has a groove. Transverse or spiral grooves 1 3. Sampling apparatus according to claims 1-12, where the selected components from or all of the puncture are subjected to a soft tissue sampling section. Bone sampling section There is enough width that the components can be inserted. Can enter the inner tube of the casing section 1 4. Any one of the sampling instruments according to claims 1-13 Where the sheath or bone sampling section On the outer surface there is a notch in a transverse line like One or more strands By notches arranged along the length of the said casing or the retention Like such a bone To determine the depth of sampling. 1 5. Any one of the claims 1-14. Where the handle is loud It is a hollow, hexagonal tube, one end with an open end. 1 6. Sampling apparatus according to Claim 1-15. Where the end of the selectable component from, or all of, the casing, the drill segment, leads the sampling section. Soft tissue Bone sampling section Soft sample collection and separation on the side attached to the handle Attach to the tube in the open end of the handle 1 7. Sampling apparatus according to claim 15 or 16 where the section handle Selectable assembly from or all of the sheath section, bone sampling section, soft tissue sampling section. They are open-ended on both sides. 1 8. Any one of the sampling instruments according to claims 1-17. Where is the pipe of The handle can be connected to a tube of selected components, from all or all of the bone sampling sleeve section. Soft tissue sampling area 1 9. Any one of the right to collect any claim 1-18 Where the handle is attached to at least one end of the bar 2 0. Sampling apparatus 19, where the handle is attached to the handle perpendicular to the Length of the aforementioned sampling apparatus 2
1. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 19 หรือ 20 ที่ซึ่ง แท่งจับดังกล่าว ยึด ติดกับด้ามจับดังกล่าว ที่ซึ่งทำให้เครื่องมือเก็บตัวอย่างดังกล่าวมีลักษณะเป็นรูปตัว T 21. Sampling apparatus according to claim 19 or 20 where the jig is attached to the handle. Where the sampling apparatus has a T-shaped 2
2. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 19-21 ข้อหนึ่งข้อใด ที่ซึ่งด้ามจับดัง กล่าวมีลักษณะเป็นแท่งทรงกระบอก มีขนาดที่สามารถใช้ในการยึดจับร่วมกับด้ามจับ ได้ 22. Any one of Claims 19-21. Where the handle is loud Said to look like a cylinder There are 2 sizes that can be used in conjunction with the handle.
3. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-22 ข้อหนึ่งข้อใด ที่ซึ่งส่วนประกอบ ที่เลือกได้จากหรือทั้งหมดของ ส่วนปลอก ส่วนเจาะนำ ส่วนเก็บตัวอย่างเนื้อเยื่ออ่อน ส่วนแยกตัวอย่างกระดูก ส่วนเก็บและแยกตัวอย่างเนื้อเยื่ออ่อน ด้ามจับ แท่งจับ ทำขึ้น จากโลหะปราศจากสนิมระดับที่ใช้ในทางการแพทย์ 23. Any one of the claim 1-22 sampling apparatus. Where the components Selectable from or all of the sheath portion, the puncture part, the soft tissue sampling section. Bone sampling section Soft Tissue Sample Collection and Separation Stands are made of medical grade stainless steel 2.
4. เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 23 ที่ซึ่ง โลหะปราศจากสนิมระดับ ที่ใช้ในทางการแพทย์ดังกล่าว คือ สแตนเลส 316 L 24. Sampling apparatus according to claim 23, where level of rust-free metals Used in the medical field are stainless steel 316 L 2.
5. การใช้เครื่องมือเก็บตัวอย่างตามข้อถือสิทธิ 1-24 ข้อหนึ่งข้อใดที่ซึ่งใช้ใน การเจาะ หรือ เลื่อย หรือ ตัด อวัยวะเป้าหมายสำหรับเก็บตัวอย่างเพื่อการตรวจทาง พยาธิวิทยาหรือการตรวจวินิจฉัยทางการแพทย์หรือการตรวจวินิจฉัยในห้องปฏิบัติการ5. Use of any one of Claims 1-24 used for drilling or sawing or cutting of target organs for clinical sampling. Pathology or medical or laboratory investigations