SU125955A1 - Fighter Trainer - Google Patents

Description

News Drains installed behind the plow bodies to drain the floor simultaneously with plowing.

The proposed draining fenders are distinguished by the fact that they use reinforcements behind the drains, the furrow dividers, which are mounted above the drains, this results in a more efficient use of irrigation water and the destruction of the subarable compacted layer, as well as cutting irrigation furrows.

The drawing shows a draining saucer, side view.

The draining-furrower simultaneously cuts vertical drains (slots), horizontal cylindrical drains, introduces fertilizers (dry and liquid), cuts furrows for irrigation along furrows, drains irrigation without planning the field - It can be used for processing wide-field fields or nesting sowing methods between 60, 70, 120, and 140 cm between rows (the last between the rows are created when the average draener is removed).

The draining-furrower consists of the following main units: drains /, the fertilizer distribution mechanism with the tank 2, the fertilizer box 5, the lifting mechanism 4, the furrowing machines 5, the frame 5, the tail 7 and the wheels 8.

For mounting the machine, the VUM-60 was used: frame, wheels, lifting and trailing mechanism. The frame of the machine was strengthened and expanded due to the additional two curved side frames and struts (inside the frame) - There are three Drainers in the machine. They work at a depth of 40-50 cm. Each drill in the front part is pointed in the form of a knife and is intended for handicrafts of vertical drains (slits). The bottom of the drainage has a drainage (expansion in the form of a cylinder) for making horizontal drains (pipes) that conduct water at a depth of 40-50 cm and allow irrigation to be done without leveling the floor — Water passes below the bottom

the grooves and the base irregularities, spills of it are absent. The cylinders in front end with an arm 9, which has a triangular shape in a cut. Tube lines 10 are welded to the back of the draener.

At the back of the main frame there is a trailed frame, on which are attached three borers (hillers) intended for cutting irrigation furrows. Furrowers are fastened using clamps to small grills located on the bottom of the trailed frame. This allows you to adjust the depth of the work of the fenders. Hand joints of 11 furrow makers are located above the hands of draeners.

Predme Shadows

A draining-furrower, including in the design of drains, a fertilizer distribution mechanism with a tank, a fertilizer box, a lifting mechanism and a frame with a grill, characterized in that, in order to more efficiently use irrigation water and destroy the subsurface compacted layer, as well as cut irrigation furrows , in it are used fortified fenders behind the drains, the ear tips of which are installed above the tips of the drains.