My ring/FIFO buffer implementation, for embedde applications. Tested on STM32L1, STM32F3, STM32F4 and PIC18F platforms.

MCC generated code for i2c read and write operations with interrupts.

A code example that shows how to configure the ADCC to read a single analog value.

The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and sends data to two slave devices, one at a time. The repository contains the Foundation Services Generated code for the application.

PIC18F47Q10 PWM RGB-LED Using Interrupts - bare metal code example

This repository provides an example of bare-metal code for GPIO read/write operations. This example shows how to read an input pin value, changed by pressing a button, and how to set an output pin value, in order to turn an LED on and off.

Foundation Services generated code for i2c write operation.

This example shows how to send a string to the PC and see it in the MPLAB Data Visualizer Terminal.

Code example for "Getting Started with CLC on PIC18" Technical Brief : Using Basic Logic Gates - Bare Metal Code

PIC18F47Q10 PWM Basic Configuration - bare metal

A code examples that shows how to configure the ADCC to read one analog value.

This repository provides an example of bare-metal code for a Wake-Up from Sleep procedure. This example shows how to obtain less power consumption by putting the device in the Sleep mode and waking it up using the IOC, with a button controlling the input pin value.

Bare metal code for i2c read and write operations with interrupts.

This repository provides a MCC-generated code example for using TMR0 in 8-bit Mode with clock output. A signal will be generated using TMR0 on the output RC2 pin.

A code example that configures the ADCC to provide an interrupt when a sharp increase or decrease is detected in the sampled value.

The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used receive data from a master device. The repository contains the MCC Generated code for the application.

This repository provides a bare-metal code example for using TMR2 peripheral to trigger the ADCC to make conversions at a fixed frequency rate, that can be adjusted with the period of TMR2.

Getting Started with Timers/Counters on PIC18. The TMR1 is configured as a counter.

This repository provides an example of MCC-generated code for a Wake-Up from Sleep procedure. This example shows how to obtain less power consumption by putting the device in the Sleep mode and waking it up using the IOC, with a button controlling the input pin value.

The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and it is used to send data to a slave device, in data mode 3. The repository contains the Foundation Services Generated code for the application.