• The git-repo-sync is a bash script that synchronizes branches between two remote Git-repositories.
  • Git-tags are not synchronized.
• You configure once what branches to synchronize and how.
  • You have to investigate some time to understand git-repo-sync conflict solving strategies and configuring.
• Your run git-repo-sync periodically, preferebly every few minutes.

Warning! Before reading the following keep in mind the difference between local and remote Git repositories.

If your people push (commit) often to a single synchronized Git-branch and do it to different remote Git-repositories, then:

• Run git-repo-sync before pushing to such the branch.

If someone pushed to the same branch (to another remote repo) in between the runing of git-repo-sync and your pusing. In this case:

• Run git-repo-sync
• Udpate your local repository (git fetch).
• Check if your commits (push) wasn't deleted from your remote Git-repository. (FYI. You local commits in your local repository will not be changed!)
• If it was deleted in the remote repo:
• merge, rebase, etc., your local branch over the latest remote commits;
• repeat Git-push for your branch.
• Repeat everything until your pushed branch will be in expected commits in your remote Git-repository.

This situation is covered by notifications but you have to configure this by yourlself in your enterprise environment.

• Adhesion of Git-remote-repositories of clients and software/support suppliers. Temporary or permanent.
• Independence from an external remote Git repository if it is slow and could be out of service time after time.
• You software teams have independent Git remote repositories.

• Install Git
• Use bash to run git-repo-sync. (It is not tested for zsh)
• Tune any automation to run git-repo-sync periodically - crones, schedulers, Jenkins, GitLab-CI, etc. Or run it periodically yourself.

This is enough for Windows, Arch based Linux (Manjaro), GNU based Linux

• Update bash by running (restart your shell after this)
  • brew install bash
• Install gAWK (GNU AWK)
  • brew install gawk

• Install gAWK (GNU AWK).
  • consider this case.

• Check gawk presence. Run gawk '{ exit; }' or see https://unix.stackexchange.com/a/236666/207074
• Check that bash version is 4.2 or above.

Copy git-repo-sync somewhere

git clone https://github.com/it3xl/git-repo-sync.git

Let git-repo-sync know location of your remote Git repositories.
Modify url_a and url_b variables in default_sync_project.sh.
You can use URL-s and file paths.

url_a=https://example.com/git/my_repo.git

url_b='/c/my-folder/my-local-git-repo-folder'

Run periodically the git-sync.sh file, which is located in the root of git-repo-sync.

bash  git-sync.sh

The git-sync.sh will tell you if there are any troubles. For example you need to update awk to gAWK in Ubuntu.

The Trade-off is an automated Git-conflict solving logic of git-repo-sync.

Even if you run git-repo-sync periodically and often, you still have a chance to get a Git-conflict. But a small chance.
So, you must know what to do in case of Git-conflicts solved by git-repo-sync.

Run git-repo-sync before Git-pushing. I.e. synchronize your both Git-remote-repos before pushing into any of them.
In this case, Git will be responsible for conflict resolution, not git-repo-sync.

You should have the both

• You run git-repo-sync rarely. I.e. someone aready pushed commites exactly to your branch after last running of git-repo-sync.
• And you and your teammate have pushed changes to the same Git-branch but through different remote repositories and your remote repositories are no synchronized between your Git-pushes.

Basically, you don't know about git-repo-sync until you are in this situation.

git-repo-sync sees a Git-conflict and uses one of Conflict Solving strategies described below.
As a result, you should provide the below steps to fix The Trade-off.

The main idea is "Re-push your local Git-commit in case of a conflict".

• Run git-repo-sync to synchronize both Git-remote-repositories (if you have no periodical auto-runs).

• Upload changes from your remote Git-repository to your local repository.

• Check if you local commit have lost its remote counterpart. I.e. the commit exist only in your local repository.

  • Performe Git-merge/rebase of your local commit.
  • Performe Git-push of your changes.

• Run git-repo-sync to synchronize your changes with changes from another side Git-remote-repository (if you have no periodical auto-runs).

• Check it manually. This is described in the above steps.
• git-repo-sync has notifications over plain text files. Ask your DevOps to distribute it.

Run git-sync.sh and it will tell you what git-repo-sync needs.
In most cases you have to install gAWK. This applies to Ubuntu.
Docker Alpine Linux images require bash and gAWK to be installed.
You have to update the bash if you use an extra old Linux distro.

Ha! You're lucky. You have to do nothing and have five options to run git-repo-sync.

Open PowerShell or CMD in the git-repo-sync folder and run one of three.

"C:\Program Files\Git\bin\bash.exe" git-sync.sh
"C:\Program Files\Git\usr\bin\bash.exe" git-sync.sh
"C:\Program Files\Git\git-bash.exe" git-sync.sh

Or you can reinstall Git and integrate the bash into your Windows during installation. Then run

bash  git-sync.sh

Or you can try to update the PATH environment variable. Try to add the following (that wasn't tested by me)

;C:\Program Files\Git\cmd;C:\Program Files\Git\mingw64\bin;C:\Program Files\Git\usr\bin

Despite that there are fair cases when it is useful to sync all branches, this is not always a good idea.
Some well know Git-servers block some branches in different ways. Some of them create "trash"-branches which you do not want to see synchronized.

So, you can synchronize branches that have special prefixes only.
You could configure these prefixes in default_sync_project.sh configuration file.
What's important, these prefixes are related to correspondent conflict solving strategies.

By default all branches are synced under this strategy.
You can do whatever you want with such branches from both sides (repositories).
In case of commit conflicts, any newest commit will win.
You can relocate branches to any position, delete and move them back in history if you run git-repo-sync regularly.

Use the following variable to limit branches synchronized by this strategy.

victim_branches_prefix=@

The most common value for victim_branches_prefix is "@".
In this case only branches that start with @ will be synchronized. E.g. @dev, @dev-staging, @test, @test-staging, @my-feature, etc.

By using this strategy you limit what your teammates may do from another side repository with branches on your side remote repository.

Branches with the following prefix will be owned by the repo from url_a variable. Let's call it A side.

side_a_conventional_branches_prefix=client-

Branches with the following prefix will be owned by the repo from url_b variable. Let's call it B side.

side_b_conventional_branches_prefix=vendor-

Other examples of prefix pairs: a-, b-; microsoft/, google/; foo-, bar-;

On the owning side repo: You can do whatever you want with such branches.

On a repo of another side:
You can do fast-forward updates and merges.
You can move such branches back in Git-history if you run git-repo-sync periodically.

All commit conflicts will be solved in favor of the owning side.

Just propouse something interesting.
BTW, the Victim and Conventional approaches cover 80% of cases you need (I beleive).

People have to make mistakes to become better. This is normal. But let's protect our clients from such the mistakes.
Define sync_enabling_branch variable

sync_enabling_branch=it3xl_git_repo_sync_enabled

Its value may represent any branch name.
Examples: @test, client-prod, vendor-master, it3xl_git_repo_sync_enabled.

The git-repo-sync will check if such a branch exist in both remote repositories and that it has the same or related commits, i.e. its commits are located in the same Git-tree.
This will protect you from occasional adhesion of unrelated git-repositories and deletion of branches that have the same names.
Git may store many independent projects (trees) in the same repository and this is uncommon behavior for many users.

I advise to use it3xl_git_repo_sync_enabled branch name to make this explicit for others that their remote Git-repo is synchronized with another remote repo.
They could search for the word it3xl_git_repo_sync_enabled in the Internet and understand the applied sync solution.

Be aware that a branch mentioned in the sync_enabling_branch variable will be alwasy synchronized by git-repo-sync.
Probably this is not a good idea to specify here the master branch name because a branch mentioned in sync_enabling_branch will be synchronized under the Victim strategy. But you can specify there a branch with one of your conventional prefixes for the Conventional syncing of it. For example client-master.

• Usage with SSH isn't tested but possible.
• git-repo-sync is resilient for HTTP fails and interruptions.
• It has protections from an occasional deletion of your entire remote repository.
• Arbitrary Git-history rewriting is supported.
• Within a single installation, git-repo-sync can synchronize as many pairs of Git-repositories as you want. Every sync pair is a sync project for git-repo-sync.
• Git-tags are not synchronized.
  • Remarks why: Some Git-servers block manipulations with Git-tags. Time was saved for research and covering all possible cases. Another repo's tags created issues for Git-tag based CI/CD-s.
• git-repo-sync doesn't attempt to do Git-merge or rebase. Just FYI.

This is a real case of my customer. You may want to synchronize your existing Git-repo with a Git-repo of your new software parnter.

Option 1.
Create a new git-repo-sync project and use it (project description file or environment variables).

Option 2.
Modify your existing project. Update its description file or environment variables.
Delete git-repo-sync/sync-projects/<your-sync-project-name> directory.
Start synchronization as usual.

Option 3.
Your Git-repository is extra huge and you can't recreate it. This is a TL;DR. Ask a Git-professional for a help.

Something went wrong for <your-branch>. It is still untracked. Possibly the program or the network were interrupted.

• Disable your antivirus or Check Point.
• Check if this branch is blocked by your Git-server.

• git-repo-sync works with remote Git repositories asynchronously, by default.
• It works much faster under *nix OS-es because Git-bash on Windows is slower. But compare to network latency, this is nothing.
• You can separate change detection and synchronization phases of git-repo-sync for readability of CI/CD logs.
• Multiple configuration capabilities are supported. Environment, configuration files, combination of them.
• Integration with bash Git Credential Helper - git-cred to obtain credentials from a parent shell environment.
• You shouldn't do anything in case of connectivity fails. Continue to run git-repo-sync periodically and everything will be restored automatically.
• After every synchronization, analyze notification files to send notifications about branch deletions or commit conflict solving.
  See git-repo-sync/sync-projects/<your-sync-project-name>/file-signals/
  • notify_solving - for conflict solving
  • notify_del - for deletions
• See instructions on how to configure more synchronization pairs of remote Git repositories.
• Number of pairs is unlimited. Every pair is a separate sync project.