8000 GitHub - kevinskey/stonecut · GitHub
[go: up one dir, main page]

Skip to content
kevinskeyPublic

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Repository files navigation

StoneCut

Browser-based rhinestone template designer + direct cutter control for the Graphtec CE6000. Replaces the Illustrator → Cutting Master chain for rhinestone work; also exports SVG for Cricut Design Space.

Run

npm install
npm run dev     # http://localhost:5173 — use Chrome or Edge (WebUSB)

Workflow

  1. Layers — each layer has its own stone size, fill stone and colors (SS6–SS34), so one project can mix SS10 lettering with an SS16 border. New text, shapes, images and cut lines go on the active layer; changing a layer's size re-stones everything on it. Layers can be hidden (not drawn or cut) or locked, and the Cut picker can cut one layer at a time.
  2. Stones — hole diameter is editable per size (hole = stone + clearance so stones brush in). Min gap is the smallest edge-to-edge distance between holes; overlapping stones are auto-removed.
  3. Text — upload any .ttf/.otf, type text, set height in mm, choose outline / fill / both.
  4. Image — upload a PNG/JPG, set target width, tune the threshold slider. Dark areas get stones (check Invert for the opposite).
  5. Edit — Add/erase mode places or removes single stones; Select mode drags them. ⌘Z undo, ⌘A select all, Delete removes.
  6. Material — presets store force/speed/passes (saved in the browser). CE6000 range: force 1–38, speed 1–64.
  7. Place — the board is the loaded vinyl, ruled in inches from the machine's ORIGIN corner (lower-right on a Graphtec). Drag the design where you want it, or type "Across from origin" / "Up from origin" in the Cut section. What the board shows is where it cuts.
  8. Cut — on the CE6000, jog the blade to the front-right corner of the vinyl and press ORIGIN. Then "Cut on Graphtec" (pinned to the bottom of the sidebar) streams the job over WebUSB; Chrome asks you to pick the cutter the first time. Or download a .plt / SVG.

Zoom: pinch or ⌘-scroll zooms at the cursor, F fits the design, ⌘0 fits the sheet. Settings live in the browser (localStorage), so each computer keeps its own.

CE6000 notes

Confirmed working setup (2026-10-04, CE6000, Sticky Flock at force 30 / speed 10). This is a recorded working setup, not a substitute for checking the current machine. The application currently starts a fresh browser at 0.100 mm (10 units/mm); the recorded setup below used 0.050 mm (20 units/mm). Set Cut → Cutter setup to match MENU → I/F → STEP SIZE on your cutter before sending. The cut confirmation displays the selected step size, origin, command mode, and axis mapping.

Setting Value
Command mode GP-GL (CE6000 factory default, MENU → I/F → COMMAND)
GP-GL step size 0.050 mm (20 units/mm) — must match MENU → I/F → STEP SIZE
Cutter origin corner Lower-RIGHT
Swap axes ON (GP-GL's first coordinate is the feed axis = the board's vertical)
Send speed/force ON (the material preset's force/speed go ahead of the geometry; set TOOLS SETTING → CONDITION PRIORITY → PROGRAM on the cutter or the panel values still win)
Position on material On the board
  • If a job feeds media before cutting, it is the data stream, not the machine: a leading H (home) or any command starting with F (chart feed) at the head of the job. src/export.ts sends neither. Pre Feed on the cutter's own menu is the only other cause.
  • If a cut comes out rotated 90°, flip Swap axes. "Send test square" cuts a small asymmetric L that shows which way the axes run.
  • Command mode: if your machine is set to HP-GL, switch the dropdown to HP-GL instead — sending the wrong dialect does nothing visible.
  • Stones cut in nearest-neighbor order so the head doesn't zigzag across the mat on dense fills.
  • If WebUSB can't claim the cutter (another driver has it), download the .plt and send it any other way — the file is the same bytes.

Production releases

The verified web deployment is https://rhinestones.tshirtbrothers.com/. stonecut.com is not assumed to be the same deployment. See docs/RELIABILITY.md for scope and validation limits.

GitHub Actions in this repository runs locked dependency installation, npm test, lint, production build, and shell/desktop syntax checks on pushes and pull requests, then retains the built artifact.

The production deployment runner uses the existing TSB droplet credentials in the kevinskey/tshirtbrothers deployment branch. Each release pins an exact StoneCut commit; it runs StoneCut's checked-in deploy.sh, which builds with npm ci, runs tests, verifies the nginx vhost/document root, installs a new release, and checks live HTML/assets and build-info.json. Subsequent releases switch an atomic symlink. A failing health check restores the previous release. It does not change nginx configuration or communicate with a cutter.

To run the same deployment on the droplet (never on your workstation):

sudo STONECUT_REF=<full-commit-sha> bash deploy.sh

The live pointer is /var/www/stonecut/html, releases live under /var/www/stonecut/releases, and the preceding target is recorded in /var/www/stonecut/previous-release. Old builds are retained for rollback. After reviewing that path, rollback can switch html to that target with a new symlink and mv -Tf; do not delete release directories while in use.

Project recovery and production packages

Design files now include artwork, sizes, editable recipes, vectors, media, colors, spacing, and a saved cutter/material profile. Legacy v1 files remain readable. Saved cutter settings are shown for review under Cut; opening a file does not silently apply them. The recovery strip reports storage errors and offers a downloadable backup. File → Save named project version stores searchable versions with previews on the current computer/site, not in an online account. Export files before moving domains or computers.

File → Download production package creates a ZIP with the whole design, per-color SVG templates sharing one coordinate frame, a preview, bill of materials, work order, placement guide, and editable project. Final geometry must fit the job area and satisfy the spacing floor before cutting/export. Publishing uses the complete rhinestone design, independently of cut selection. Publish keys are retained for the browser session rather than indefinitely.

For the Cricut

Export SVG and import into Design Space. The SVG is sized in real mm; make sure Design Space doesn't rescale it on import (check the width matches).

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages

0