EUCLIDTRACK is an experimental synth workstation for generating melodies and rhythms through euclidean sequencing and modulation. Four tracks, each with its own synth voice, euclidean sequencer, and effect chain, all driven from the Brick's buttons, drawing from a deep collection of engines spanning virtual analog, FM, physical models, sample romplers, wavetables and drum machines. Sixty four scenes, four modulators per track, twelve performance macros, generous saturation with many drive algorithms, a hybrid morphing delay/reverb with a resonator and a shimmer stage, a master bus live looper, and a mixer that lets you build a feedback network for unique organismic (and slightly dangerous) results!
EUCLIDTRACK has a full manual built in. Press MENU (or Select+Start) at any time to open the main menu, then choose HELP: page-by-page reference on every control, view, and gesture. Whenever you are unsure how something works, that is the fastest place to look.
EUCLIDTRACK started life as DRONAGE-S4, a project sideloaded onto the Torso S-4 to run alongside its vanilla OS. That version never went public: running it required some distinctly user-unfriendly steps, like replacing the CM4 inside the S-4 with one that has more RAM, and hacking the audio configuration of the S-4 OS. So the project gained a new life on the TrimUI Brick, a platform anyone can actually own, as the instrument you are holding now.
On NextUI:
- Install or update EUCLIDTRACK through the PakStore. That is the easiest route and updates are one press.
On other firmware:
- Download the latest
EUCLIDTRACK.pak.zipfrom the releases page. - Unzip it and copy the
EUCLIDTRACK.pakfolder to your SD card underTools/tg5040/. - Reinsert the card and launch EUCLIDTRACK from the Tools menu.
Your projects live in /mnt/SDCARD/EUCLIDTRACK/, outside the app folder. They survive updates and reinstalls. Back up that folder to back up your music.
- Launch EUCLIDTRACK from the Tools menu.
- The device volume buttons work as usual. Master volume inside the app is a separate control (Utility Right plus dpad up/down) and always starts at unity on launch.
- To quit: press MENU, choose QUIT.
A fresh boot is silent on purpose. Three things have to happen:
- Most important thing: Hold SELECT to bring up minimap, use dpad to focus on a cell, release SELECT to jump on that view.
- Start the transport. Tap and release START (a quick tap, not a hold). The tempo light starts flashing. Tap again to stop.
- Open at least one track's gate. Hold START (or Utility Right) and press a face button: West
is track 1, North
is track 2, East
is track 3, South
is track 4. While you hold, the bottom row shows each track's gate state: ▶ means open, ■ means closed. A track with a closed gate makes no sound, no matter what else is set.
- Give the sequencer something to play. On the EUCLID view, either raise TRIGGERS so the pattern has hits in it, or set STEPS all the way down to Drone for a continuous, infinite tone.
Transport running, a gate open, and a pattern with hits (or a drone): now you have sound.
- Top bar: scene number, root note, scale, tempo. The small light next to the tempo flashes green on the downbeat and yellow on the other beats. While recording it turns into a dot and the downbeat flashes red instead.
- Canvas: the middle of the screen, showing a visualization of the active device (step grid, scope, mixer meters, and so on). It is a live picture of the current parameter state, not something you touch directly: all editing happens through the eight parameter cells below.
- Param panel: eight parameter cells in two rows of four, K1 to K4 on top, K5 to K8 below. The focused cell shows its label in bright white.
- Corner icon: the top right of the panel always shows where you are, prefixed by who owns the view. Track views read T1 to T4 before the icon, and a MODULATOR view that belongs to PERFORM or MIX shows that scope's icon in front instead, so two modulator views that look alike can always be told apart. An icon with a braille mark shows the page: ⠈ is page 1, ⠘ is page 2. In the MODULATOR view the icon takes the color of the active modulator.
The face buttons are named by position: B is South · Y is West
· X is North
· A is East
Every layer announces itself on screen: hold L1, L2, Utility Left, Start or Utility Right and the bottom row lists what the face buttons do right now (shapes, the CLEAR stack, COPY and PASTE, or each track's gate state). Release the layer and the row returns to the device tab bar.
Utility Left and Utility Right are the two buttons under the screen. They are L3 and R3 on the original Brick, and L4 and R4 on the Brick Pro. On the Brick Pro the right stick also nudges the focused value, and clicking the right stick resets that value (with STICKS AS MACROS off; with it on, the right stick click is MACRO 10 instead).
- Use the dpad to focus one of the eight parameter cells.
- Hold South
and press the dpad to change the value. Left and right are fine steps, up and down are coarse. On a Brick Pro or Smart Pro, the right stick does the same with no hold.
- West
pushes into the focused cell. Cells with lists (engine type, waveform, scale) open a popup: dpad to choose, West
or South
to confirm, East
to cancel.
- East
resets the focused parameter to its default.
Pressing up from the top row of cells moves focus into the top bar: SCENE, ROOT, SCALE, TEMPO. The same South plus dpad gesture tweaks them. SCENE steps switch scenes instantly, with no quantize wait. Down returns to the parameter cells.
Hold Select to open the map. It is the navigation hub: every view, page, track and modulator is a cell.
T1 ⠈ ⠘ ⠈ ⠘ · ⠈ ⠘ ⠙ ⠛
T2 ...
T3 ...
T4 ...
MIX ⠈ ⠘ ⠙ ⠈ ⠘ ⠙ ⠛
PRF ⠈ ⠘ ⠙ ⠛
SCN
- Dpad steers. Up and down change row, left and right walk along a row, from a device through its pages to the modulators.
- Release Select to open the highlighted cell. Releasing without moving does nothing, so peeking is always safe.
- Double-tap Select quickly to latch the map open hands-free: steer without holding, then a single Select on a cell jumps there and unlatches, or MENU backs out with no jump. The chords below all work while it is latched.
- The white cell is where you came from. Modulator cells are colored: red, blue, green, yellow for modulators 1 to 4.
- While the map is open:
- South
sets the highlighted modulator as the active one without closing the map.
- West
tap copies the highlighted cell's settings. West
held about 1.5 s copies the whole track of that row.
- North
pastes into the highlighted cell.
- East
resets the highlighted cell's device, parameters and modulation both.
- South
Copy and paste are smart: a device pastes onto the same device on another track, a modulator pastes onto any modulator cell, a whole track pastes onto a whole track.
- Start toggles the transport.
- Start (or Utility Right) held plus a face button toggles a track's gate: West
is track 1, North
is track 2, East
is track 3, South
is track 4.
- A gated off track fades by its FADEOUT time and its reverb tail rings out naturally.
- Track selection follows the view map rows: open any cell on T3's row and track 3 becomes the selected track.
| Cell | Does |
|---|---|
| STEPS | pattern length. The first choice below 2 is Drone: the gate holds open for a continuous tone and the pattern controls go inert |
| TRIGGERS | how many hits, spread evenly (the euclidean part) |
| RATE | clock division of this track |
| PROBABILITY | chance that each hit actually plays |
| SHIFT | rotates the pattern |
| PAD | appends silent steps after the pattern: the loop becomes STEPS plus PAD long, with the padding always resting. Great for odd loop lengths and breathing room |
| RESET BEAT | restarts the pattern every N beats |
| SHUFFLE | swing |
Two of these cells hide a popup on the cell push (West ; dpad chooses, West
or South
commits, East
cancels):
- TRIGGERS picks the trigger mode, which sets how long each hit sustains. TRIGGER plucks: the note strikes and decays away at once, percussive. GATE holds the note at full level for the whole step and only lets LPG DECAY take it down once the step is over, so a slower RATE rings longer; back-to-back hits re-strike from silence, each carrying its own pitch. TIE holds across the whole run of back-to-back hits: one strike, full level to the next rest, pitch unchanged the whole way, decay at the end of the run. Engines that shape their own envelopes (the drums, Modal, String, the 6op FM banks, Hyper Chords, Speech, the River family and the Greed family) sound the same in TRIGGER and GATE. TIE is different on them: a held gate is a single rising edge, so a run of back-to-back hits strikes once and the rest of the run stays silent.
- RATE picks the timing feel. STRAIGHT is the plain division; TRIPLET squeezes three steps into the time of two (shorter, faster steps) and DOTTED stretches each step to one and a half times its straight length.
Page 1:
| Cell | Does |
|---|---|
| ENGINE | the synthesis model. Each model repurposes the three cells below in its own way |
| HARMONICS | the model's first macro control |
| TIMBRE | the model's second macro control |
| MORPH | the model's third macro control |
| CUTOFF | the voice filter's frequency |
| RESONANCE | the voice filter's resonance. It also brings in drive as it rises, and the lowpass self-oscillates at the top |
| FILTER TYPE | morphs the filter continuously: a Moog-style ladder lowpass at 0, blending into a PoliVoks-style filter for bandpass in the middle and highpass at full. Prefer the pre-ladder voicing? Set LPF FLAVOR to POLIVOKS for that track under OPTIONS, then PROJECT SETTINGS, and the PoliVoks runs across the whole range, lowpass included |
| PITCH | the note, quantized to the global root and scale |
Page 2:
| Cell | Does |
|---|---|
| FADEIN | how long the track takes to fade in when its gate opens |
| FADEOUT | how long it takes to fade out when the gate closes. The DRIFT tail rings out past the fade |
| LPG DECAY | the plucked envelope's decay per hit |
| LPG COLOR | the pluck's character, from soft and dark to snappy and bright |
| VELOCITY | in euclidean mode: how hard each hit strikes, sampled once per trigger, so a modulator here makes accent patterns. In Drone mode: a continuous level control, so a modulator here makes smooth swells |
| OUT | which of the model's two outputs feed the chain: their mix, either one alone, or a true stereo split (straight or swapped) |
A flanger and a chorus in series. Each has its own WET, so you can run either alone or both.
FL MODE and CH MODE are bipolar flavor cells. The center is the subtlest setting, each side leans into a named character, and everything between is a smooth blend, so a modulator can sweep the flavor without a jump.
| Cell | Does |
|---|---|
| FL MODE | flanger flavor. Negative is a hollow notching comb, positive a resonant jet, center a gentle modulated delay |
| FL RATE | flanger sweep speed |
| FL DEPTH | flanger sweep depth |
| FL WET | flanger dry/wet |
| CH MODE | chorus flavor. Negative is a warm Juno thickening, positive a wide, spacious spread, center between the two |
| CH RATE | chorus movement speed |
| CH DEPTH | chorus movement depth |
| CH WET | chorus dry/wet |
Eight fixed bands, one cell per band, cut and boost around the middle. All eight are modulation targets, so a modulator can sweep the whole bank.
| Cell | Band |
|---|---|
| A | 90 Hz |
| B | 122 Hz |
| C | 225 Hz |
| D | 418 Hz |
| E | 777 Hz |
| F | 1.4 kHz |
| G | 2.7 kHz |
| H | 4 kHz |
| Cell | Does |
|---|---|
| ALGO | picks the saturation algorithm from a generous menu of drive flavors |
| DRIVE | how hard the signal pushes into the algorithm |
| BIAS | asymmetry: skews the drive for even-harmonic, pushed-transformer character |
| COMP | the per track compressor, sitting at the very end of the track's chain |
| BASE | low corner of the drive's tone filter |
| WIDTH | how many octaves above BASE stay open |
| DIRT | bipolar, silent at center. By default negative fades in tape hiss, positive vinyl crackle. Each track can swap the flavor to WHITE/PINK under OPTIONS, then PROJECT SETTINGS: generated noise (white on the negative side, pink on the positive) with amplitude-based excitation, so it opens with the track's level and fades out when the track goes quiet. Either flavor is added after the reverb, follows COLOR's BASE and WIDTH tone window, and stays a dry surface layer |
| WET | dry/wet of the drive section |
DRIFT is one machine that morphs between two identities: at low MORPH it is a clean stereo delay with ping pong cross feedback, at high MORPH a dense diffused reverb wash, and everywhere in between is playable space.
Page 1:
| Cell | Does |
|---|---|
| SIZE | room size, with a tape style pitch glide when moved |
| DAMP | high frequency decay of the tail |
| FEEDBACK | tail length. The top of the range goes over unity and self sustains into a saturating wall, on purpose |
| MORPH | crossfades clean stereo delay into diffused reverb wash. Low MORPH with high FEEDBACK is a ping pong echo |
| SHIFT | frequency shifter in the feedback path, in Hz, inharmonic by nature |
| MOTION | modulates the delay line lengths with a slow internal LFO, rate and depth rising together on one control: subtle settings breathe and shimmer the tail, high settings bend it into detuned, seasick movement |
| DUCK | the wet output ducks under the dry input and blooms back in the gaps |
| MIX | dry/wet. At zero nothing of DRIFT is heard, including the resonator and the shimmer |
Page 2:
| Cell | Does |
|---|---|
| WIDTH | stereo width of the wet, mono to very wide |
| SATURATION | brightness and drive of the wet top end |
| SHIMMER FBK | how much pitch shifted signal recirculates through the tail. Zero is off |
| SHIMMER AMT | the shimmer blend, bipolar. Center is off. Turning right fades in an octave up, then an octave down joins past halfway. Turning left fades in a fifth plus the octave together, then two octaves up join past halfway for the full choir |
| RESO TUNE | the resonator's pitch, quantized to root and scale |
| RESO DRIFT | spreads the resonator's upper voices away from pure harmony |
| RESO FBK | resonator ring length and brightness |
| RESO AMT | how much of the reverb input runs through the resonator. At full, the space breathes pure resonator |
The resonator is a three voice tuned comb bank sitting in front of the reverb. The shimmer is a granular pitch shifter inside the reverb's feedback loop, so every pass climbs through the chosen intervals.
Page 1: VOLUME and TONE per track. Page 2: PAN per track, then the master strip:
| Cell | Does |
|---|---|
| MASTER COMP | bipolar: negative pumps (sidechain duck), zero bypasses, positive glues. The row under it is a live gain reduction meter |
| SC SOURCE | what the compressor listens to: the master sum, or one track (point it at your kick for classic pumping) |
| SC FILTER | tone tilt on the listening signal only |
| BASS MONO | collapses the low band to mono, crossover 30 to 200 Hz |
In MIX view, the shape layer (hold L1) mutes and unmutes tracks. Mute is a hard cut after everything; gates fade and leave tails.
Page 3 turns the four tracks into a network. Eight ring sends, both directions around the circle:
K1..K4 forward: SEND T1>T2 T2>T3 T3>T4 T4>T1
K5..K8 reverse: SEND T2>T1 T3>T2 T4>T3 T1>T4
The rows are aligned so every COLUMN is a mutual pair: the cell under T1>T2 is T2>T1, and so on. Raise both cells in one column and you have an instant two track feedback loop.
The network, drawn out:
┌───────────────────◄── T4>T1 ──◄───────────────────┐
│ │
┌─▼──┐ T1>T2 ┌────┐ T2>T3 ┌────┐ T3>T4 ┌──┴─┐
│ │ ────────► │ │ ────────► │ │ ────────► │ │
│ T1 │ │ T2 │ │ T3 │ │ T4 │
│ │ ◄──────── │ │ ◄──────── │ │ ◄──────── │ │
└─┬──┘ T2>T1 └────┘ T3>T2 └────┘ T4>T3 └──▲─┘
│ │
└───────────────────►── T1>T4 ──►───────────────────┘
And where a send lands inside the receiving track:
neighbor sends ─────┐
▼
OSC ───────────────(+)─► DIMENSION ► FILTER ► COLOR ► DRIFT ─┐
│
out ◄── fader ◄──┬──────────────────────────────────────┘
│
└─► tap feeding this track's own sends
Each send feeds that track's finished sound (taken before its fader) into the start of the named track's chain, so the sent signal rides the whole destination chain: filter, color, drive, reverb, everything. Because both rings close the circle, sends can feed back into themselves through the other tracks. A high-pass and a soft-clip guard every injection, so the network saturates musically instead of running away.
Things to know:
- The tap is pre-fader: pulling a track's volume mutes its direct sound but keeps it feeding the network. That is a feature: a track can become a silent processor for its neighbors.
- A gated-off track silences whatever is sent through it. The send rides the target's gate, so playing gates live also plays the network.
- All eight sends are modulation targets.
- Escape hatches: East
on a focused send resets it, and gripping all four shoulders at once (L1+L2+R1+R2) snaps every send to zero from anywhere. That grip is the big red button: when the network gets away from you, grab everything. (The CLEAR layer's RESET PARAMS resets the mixer's levels, pan and tone, not the sends.)
Recipes to start with:
- Delay into reverb. Set T1's DRIFT to low MORPH with high FEEDBACK (its delay mode) and T2's to high MORPH with FEEDBACK around 70 and a generous SIZE, then raise SEND T1>T2. T1's hits echo in its own delay, and every echo drifts onward into T2's reverb: the classic delay feeding a reverb, split across two tracks with separate tone controls over each stage.
- Ethereal delay lines. Both tracks on low MORPH, high FEEDBACK, slightly different SIZE values, sends raised both ways between them. The two delays feed each other and the echoes stagger into long irregular trails that never quite repeat. Add a touch of Shimmer on one side and the trails start climbing.
- The silent processor. Turn T4's TRIGGERS to zero so it plays nothing of its own, then dial its filter, COLOR and DRIFT as an effect chain and send T3 into it. You just built a return channel.
- The breathing mix. Map a slow LFO onto one send with a small amount. The cross-bleed swells and fades and the whole mix starts to move on its own.
- The ecosystem. Raise several sends to around 30 or 40 percent with DRIFT wet and FEEDBACK high on every track, then perform with the track gates: every gate you open or close reroutes the whole network. This is the deep end.
A warning about extreme feedback. With several sends high and DRIFT FEEDBACK past its self-sustain point, the network becomes a self oscillating instrument. The output is always limited and cannot clip or run away, but it can jump from quiet to VERY loud in an instant, and screaming resonances are part of the deal. Turn the master volume down before you go exploring, be gentle with headphones, and remember the fast exits: grab all four shoulders at once (every send snaps to zero), or stop the transport. What happens in the network is your responsibility. Have fun.
The master bus ends in a lookahead limiter. It is always on, not a control you set; four loud tracks cannot clip the output.
A single loop that records the whole master bus, always locked to the clock. Capture the live mix, crossfade over to the loop, load a different project, and fade back in, all in time. It is built for live sets and for DJ-style transitions between projects.
Open it from the view map: it sits on the last row, next to SCENES.
With the shape layer (hold L1), West is the record shape and North
is OVERDUB ∞. What West does reads the loop's current state:
North OVERDUB ∞ arms an endless overdub from a playing loop: it keeps layering until you punch out with West. While it runs it drops off the deck and West reads PUNCH OUT; pressing North during an OVERDUB 1 turns that pass endless.
LOOP LEN is the loop's duration. A punch-out never shortens the loop: it stays LOOP LEN beats, and any time you did not record is silence, or the layer beneath for an overdub. Set the length before you record.
Stopping restarts a capture. Stop the transport while you are recording and the take in progress is discarded. The next play re-arms and records fresh from the top. A finished loop is not affected: it just restarts in time and keeps sounding through a stop.
Once captured, the loop always plays. It restarts from the top every time the transport starts, and it keeps sounding through a stop, so you can fade a loop out by hand while everything else is silent.
| Cell | Does |
|---|---|
| XFADE | equal-power crossfade from the live mix into the loop. Never saved |
| LOOP LEN | loop length in beats: 4, 8, 16, 32, 64 or 128 |
| QUANTIZE | the punch in and out grid: 1, 2, 4, 8 or 16 beats |
| OVERDUB FBK | overdub feedback: 0 replaces the old layer, 100 percent stacks layers forever. With OVERDUB ∞ this is how the layers build |
| TONE | the same bipolar DJ filter as the mixer's TONE, on the loop only. Negative is low-pass, positive is high-pass, center is flat. Never saved |
The canvas draws the loop as a waveform: red while recording, dim white while playing, with a bright playhead riding across it.
The CLEAR layer (hold L2) here becomes UNDO, REDO, ERASE BUFFER and RESET PARAMS. RESET PARAMS (South ) returns the four cells to their defaults but leaves the audio alone. ERASE BUFFER (East
) drops the captured loop, so it asks first: West
confirms, South
cancels. Both answer the prompt even while you keep L2 held.
The looper saves nothing to the project. LOOP LEN, QUANTIZE, OVERDUB FBK, XFADE, TONE and the recorded audio are all live session state: they survive loading another project and starting a new one, so a loop you are performing never changes under you when you switch projects. That is the whole point. To hold it fully in sync across a switch, also turn on KEEP BPM ON LOAD in OPTIONS (see below), which keeps the tempo through both load and new. The only thing that resets the looper is a fresh boot or an explicit ERASE / RESET PARAMS.
A scene is a full snapshot of everything. Sixty four slots.
- In SCENES view: dpad up/down moves the cursor, West
launches or selects. With the shape layer (hold L1): West
LAUNCH, North
LOCK, East
RANDOM (launch a random saved scene), South
CHAIN (add the scene to the chain).
- Left/right move across the CHANCE, RULE and QUANTIZE cells, which control automatic scene advancing: chance to fire, what to launch, and the launch quantize grid.
- Launches wait for the quantize boundary; the top bar shows the queued jump. For instant switching use the SCENE slot in the top bar.
- TEMP (North
tap) is a scratchpad: experiment freely, tap North
again and everything reverts. Saving is blocked while TEMP is active.
LOCK freezes a scene. Normally, edits you make while a scene is active are written back into it when you switch away, so scenes remember what you did. A locked scene refuses that write back: tweak it as hard as you like during a performance, and relaunching it snaps back to exactly the state you locked. Unlock to make edits stick again.
Four modulators per track, four for MIX, four for PERFORM. Each is an LFO with waveform, rate, phase, skew, smoothing and more. The four slots have fixed colors everywhere in the app: 1 red, 2 blue, 3 green, 4 yellow.
- Tap R1: the MODULATOR view for the active slot, with a live scope. The main cell cycles waveforms. With the shape layer (hold L1), West
opens the waveform category menu and South
rerolls random shapes.
- Waveforms: Sine, Tri, Saw up, Saw down, Square, sample and hold (random and seeded), plus follower shapes that react to another track's audio or gates, and step sequence shapes.
- Follower shapes swap the cells to INPUT, ATTACK, RELEASE and FILTER IN. FILTER IN tone-filters only what the audio follower listens to, never the audible signal: turn it negative to focus on the source's lows (isolate the kick out of a busy drum track), positive to focus on its highs. It is disabled for the gate follower, which listens to triggers rather than audio.
- Rates are clock synced. The square wave rises at the start of its cycle, like a clock gate.
- Play modes (shape layer East
cycles LOOP, RETRIG, ONCE): LOOP is the usual free running cycle. RETRIG restarts the cycle on every hit of the track. ONCE plays a single pass per hit and then holds: smooth shapes become envelopes of any shape (skew one for attack and decay), S&H and Seq 32 advance exactly one step per hit so the hits become the clock, and Seq DIV fires its whole sequence once per hit. RETRIG and ONCE wait at their start point until the track's first hit, and restarting the transport rewinds them. Follower shapes and the MIX and PERFORM modulators always loop.
- Pick the active modulator in the view map: highlight a
cell and press South
or just open the cell. Inside the MODULATOR view, hold R1 and press dpad left/right to browse the four slots directly; releasing R1 after browsing stays in the view, while a plain R1 tap still exits.
- Hold R1 to assign: by default (QUICK MODULATION ASSIGN on), while you hold R1 the dpad sets the modulation amount directly on the focused cell (coarse and fine both), so you assign in one move. On stepped destinations (STEPS, TRIGGERS, RATE, ENGINE, ALGO and the like) the coarse gesture snaps the amount between notches, each worth exactly one step of the destination at full modulation swing; fine presses still trim by 0.1 percent. West
flips the cell between unipolar and bipolar. East
clears the cell's assignment. Release R1 when done. If you would rather change the destination while assigning, turn QUICK MODULATION ASSIGN off in OPTIONS: then, while you hold R1, the dpad picks a parameter freely, and South
plus dpad assigns the amount to the chosen one.
- The MODULATOR view is scope aware: opened from MIX it edits the MIX modulators, from PERFORM the PERFORM modulators.
Twelve performance macros: M1 to M8 are sliders, M9 to M12 are momentary action buttons.
- Tap R2: the PERFORM view. Dpad focuses a slider, South
plus dpad moves it. With the shape layer (hold L1), the faces fire M9 to M12, and they stay active only while held.
- Hold North
in PERFORM to open the macro picker: dpad chooses any of the twelve, release confirms. That macro becomes the active one.
- Hold R2 to assign on any device view: focus a cell, dial the amount, West
flips polarity, East
clears. Release when done.
- The same hold works inside a MODULATOR view: assign a macro to a track or MIX modulator's own cells (RATE, PHASE, and the rest), so one slider can, say, sweep a modulator's speed. The one exception is PERFORM's own modulators, since they drive the macros themselves; trying it there just shows a toast explaining why.
A macro can drive dozens of parameters at once across every track.
Hold L2 and the face buttons become:
| Face | Action |
|---|---|
| West |
UNDO |
| North |
REDO |
| East |
RESET MOD: clear the current view's modulation assignments |
| South |
RESET PARAMS: reset the current view's parameters |
The deck row shows these while L2 is down. Undo history covers parameter edits, resets, randomize, paste and scene operations. In the LOOPER view the East face is ERASE BUFFER instead of RESET MOD, since the looper has no modulation to clear.
L2 plus R2 together randomizes the current device. It is curated per device: on EUCLID it rolls the pattern but never PROBABILITY, RESET BEAT or Drone, and never lands on silence.
Press MENU (or Select+Start): SAVE, SAVE AS, LOAD, NEW, START RECORDING, OPTIONS, QUIT. Select backs out one level anywhere in the menu, including text entry.
- SAVE overwrites after a confirm. A never saved project routes to SAVE AS.
- SAVE AS: left/right move the cursor, up/down cycle the character, West
confirms, East
deletes a character, Select or MENU cancels.
- LOAD: dpad chooses, West
loads. Hold East
about 1.5 s on a project to delete it, with a confirm dialog. Select or MENU backs out.
- NEW starts fresh after a confirm.
- Tempo is saved with the project.
Template: save a project, then copy it on the SD card to /mnt/SDCARD/EUCLIDTRACK/template/template.euclidtrack. It becomes the startup state, the NEW project state, and the target of every reset. A template is never overwritten by SAVE.
Press MENU and choose START RECORDING. The app records its final stereo output, exactly what you hear, into a WAV file. Choosing it closes the menu right away and a toast confirms RECORDING STARTED, so you are back on your instrument with the tape already rolling. The menu entry flips to STOP RECORDING while recording, and the beat light next to the tempo becomes a dot with a red downbeat so you always know recording is live.
- Files land in
/mnt/SDCARD/EUCLIDTRACK/recordings/, named after the current project plus a timestamp, likeMYTRACK_20260718_143059.wav. - Recordings are 16 bit, 48 kHz, and automatically normalized to a healthy level when you stop.
- Stopping also closes the menu right away, and a toast shows RECORDING STOPPED with the file name. Long names scroll back and forth so you can read the whole thing; any button dismisses the toast early.
- Stopping within 5 seconds cancels and deletes the file instead (the toast says RECORDING CANCELLED), so accidental taps leave no litter.
- Length is unbounded: record a whole set. The file is written as it goes, so even a dead battery leaves a playable WAV up to that moment.
Everything in this submenu is saved with the project (a template project carries its values into every new project).
| Row | Does |
|---|---|
| PITCH MOD RANGE | how far modulation can push pitch: about 1.7 octaves, or the full range |
| EUC PITCH S&H DELAY | a tiny wait before each hit samples its pitch, so modulation has settled first. Pure utility: mostly you won't need to touch the default value |
| 2x MOD RANGE | off by default. Doubles every modulation contribution, LFOs and PERFORM macros, both unipolar and bipolar. On, a full assignment reaches twice as far: a unipolar modulator sweeps a parameter's whole range (0% to 100%) instead of stopping at the midpoint. It also doubles the PITCH MOD RANGE, and that row's label updates to match (±1.67 becomes ±3.33 oct, FULL becomes FULL ×2). Bipolar modulators that already reached both rails clamp harder when this is on. Leave it off to keep older projects sounding the same |
| MOD SMOOTHING | SMOOTH is the classic gliding response, where every modulator eases into its new value. FAST makes stepped modulation, like Seq32 or Square, snap between values on HARMONICS, TIMBRE, MORPH and CUTOFF |
| DIRT NOISE T1 to T4 | one row per track. TAPE/VINYL is the classic baked loops. WHITE/PINK is generated noise that opens with the track signal instead: white noise on the negative side of Dirt, pink on the positive |
| LPF FLAVOR T1 to T4 | one row per track: which filter serves the FILTER TYPE range. LADDER is the modern lowpass, covering the bottom of the range and crossfading into the classic filter for bandpass and highpass. POLIVOKS runs the classic filter across the whole range instead, lowpass included, and is a little cheaper to run |
Everything else lives on the main OPTIONS list. THEME, QUICK MODULATION ASSIGN, SWAP FACE KEYS, LOAD QUANTIZE, STICKS AS MACROS, PREVIEW PARAM ON FIRST EDIT, and ANALOG FILTER are saved globally, across every project and boot. KEEP BPM ON LOAD is the exception: session only, always off at boot and never written to disk, so you flip it on by hand each time you want it for a live set.
- The randomizer (L2 plus R2) plus undo (West
with L2 held) is a fast idea machine: roll, listen, undo, roll again.
- DRIFT's FEEDBACK above 85 percent self sustains forever. Park a drone track into it, gate the track off, and play over the wall of sound.
- Set STEPS to Drone and modulate VELOCITY with a slow LFO for evolving pads that breathe on their own.
- An LFO on SHIMMER AMT morphs the shimmer choir while it blooms.
- The map plus copy chords make sound design fast: build one great track, hold Select, copy the whole row, paste it onto another track, then vary.
- Rare tiny audio crackle, about once a minute: this is the device's wifi radio interrupting audio. Turn wifi off in the system settings when recording or performing.
- No sound: check the transport (tap START), the track gates (hold START and look at the bottom row), TRIGGERS on the EUCLID view (a pattern with zero hits plays nothing), MUTE on the mixer (MIX view, hold L1: the faces show MUTE or UNMUTE per track), the master volume (Utility Right plus dpad up), and DRIFT's MIX on a track that seems silent but is running.
- While assigning a modulator or macro, the dpad changes the amount instead of letting me move to another parameter (or the opposite): that is the QUICK MODULATION ASSIGN option (OPTIONS, on by default). On, the dpad adjusts the amount on the focused parameter while you hold R1 / R2. Off, the dpad moves across parameters to pick a destination first, then South
plus dpad adjusts. Set it to whichever workflow you prefer.
- A project loads (or a new project appears) only after a wait, or only on the beat (or the opposite, it loads the instant I pick it): that is LOAD QUANTIZE (OPTIONS). With the transport playing and it set to 4 / 8 / 16, a LOAD or NEW is held until the next downbeat on that grid, so it lands in time, and a countdown shows meanwhile. Set it to OFF, or stop the transport, for an immediate load.
- Stuck or strange state: quit via MENU and relaunch. Projects are safe on the SD card once saved.