Repository navigation
Releases
Releases · JWock82/Pynite
3.2.1
Replaced inefficient member T matrix inversions with transposes.
Fixed local member load transformations when calculating modal mass.
Corrected the centroid calculation for linearly varying distributed loads used to locate lumped mass.
Shear Wall Improvements
- Added shear wall pier top results and coupling beam right hand side results to the pier/coupling beam force results output.
- Adjusted shear wall pier and coupling beam internal force results sign convention to match the sign convention used for members.
- Added targeted testing for shear wall pier and coupling beam sign convention and load magnitudes.
- Added shear wall docstrings and a readthedocs documentation page.
Bug Fix for Shear Walls & Improved Detection of Unstable Structures
v3.1.1 Updated lock file
Pushover Analysis
- Added pushover analysis! Currently, only steel sections are supported for pushover analysis. The assumed interaction equation used to estimate plastic behavior is currently calibrated toward I-shaped members.
- Refactored all elastic stiffness matrix references from
KandktoKeandke. Most users will not notice this change. Power users who were accessing the stiffness matrices directly will want to note this refactor. This clarifies the code base by indicating which type of stiffness these matrices represent, and reduces ambiguity in preparation for addition of further geometricKg/kgand plasticKm/kmstiffness matrices. - User's can now control the size of member plots.
- Improved
ShearWall.screenshots()method. Added coupling beam plots. Added the ability to use theVTKrenderer instead of thepyvistarenderer for screenshots. - Removed individual load combo plots from member plots when an envelope plot is requested. They cluttered the plots without adding much value.
Bug Fix for Envelope Results with Both Tagged & Untagged Combos
v2.4.1 Bug fix for envelope results on untagged load combos
Added Governing Combo Results to Member Max/Min Methods
- Member
maxandminmethods now return governing load combination along with the member max/min forces. - Bug fix: Quadrilateral element displacements had corners swapped during VTK visualization. This was a relic from the old MITC4 formulation that has been corrected.
Envelope Member Diagrams, End-Release Visualization, Shear Wall Validation & Bug Fixes
- Added enveloping to member diagrams. Set
combo_nameto a list of combo tags and the member diagram will show an envelope of all the combos that have any of those tags. - Bug fix: Quadrilateral element displacements had corners swapped during VTK visualization. This was a relic from the old MITC4 formulation that has been corrected.
- Bug fix: Added shear wall and mat foundation load cases to
FEModel3D.load_cases(). The list of load cases was sometimes incomplete if these meshes had not yet been generated. - Added bending moment end releases to visualizations.
- Bug fix for shear walls with flanges having an origin with their origin at Y != 0.
- Rectangular meshes now filter out user defined control points that erroneously lie outside their boudaries.
Auto-meshing & Visualization Improvements
- Normalized member force diagrams across the entire model for visual clarity.
- Made mesh auto-regeneration smarter and more efficient, targeting only meshes that have been altered since the last run.
- Added
ShearWallmesh auto-regeneration. Whenever a model is solved any old or outdatedShearWallmeshes are automatically removed and replaced by a rebuild. - Optimized auto-calculated annotation sizing: The new automatic annotation size calculation feature now uses vectorized NumPy operations and caching for efficient rendering of large models with hundreds or thousands of elements.
- Adjusted member diagram label offsets for clarity.
Member Force Diagrams
- Added member diagrams feature for easy visualization of shear, moment, axial, and torsion diagrams along members.
- Updated documentation for rendering.
Major Performance & Memory Improvements + Other Improvements
- Major speed boost and leaner memory usage: the global stiffness/mass assembly plus the nodal load and fixed-end reaction builders now use block-based vectorized writes instead of Python loops, which keeps data in contiguous NumPy buffers rather than thousands of temporary Python objects. The dense solver sees ~15-25% faster
K/Mbuilds in our targeted benchmarks, while sparse solver runs see ~30% faster stiffness assembly in our benchmarks. - Meshes can now be regenerated with the
FEModel3D.meshes[mesh_name].generate()command. This command removes the old mesh and replaces it with an updated one. The mesh will not remove nodes needed by other elements outside the mesh. Note that any loads applied to the old mesh will be lost when its elements and nodes are deleted. This makes meshes truly parametric. - Added
FEModel3D.delete_mesh()to help deleting old meshes properly. - Renderers now automatically set the annotation size as 5% of the minimum distance between nodes. You still have the option of overiding this by setting the annotation size manually.
- Added load case/combo identification to VTK rendering.
- Dropped support for Python version 3.10, which is not compatible with Numpy 2.4.
- Removed unecessary checks for Scipy. Scipy has been a required dependency for some time now.
- Cleaned up whitespace to conform to PEP8 style guide.