Website: openx6x00.org
Open firmware for the Xiegu X6100 and X6200: a complete microSD image with every digital mode decoded on the radio itself, and sent where the mode transmits; the DX cluster on the waterfall; portable activations (SOTA, POTA, WWBOTA, HOTA, WWFF, TOTA, WCA, MOTA, lighthouses, Tiles, LLOTA) with big outdoor tiles; themes; Bluetooth headphones and CAT; the radio worked from a browser, as a panel of its own or with its own screen live; a web configurator; an update from inside the radio; and a TCI server so the VFO-Knob and other TCI clients tune, hear and key the radio over the network. In the RF.Guru identity: near-black surfaces, gold for what is on, electric blue as the second accent.
An X6200 on 20 m during the CQ WW SSB weekend: the spectrum, the band plan strip and the cluster's calls at the top of the waterfall, FT8 at the marker, the needle S-meter.
Install · Updating · Screenshots · Manual (a PDF with each release) · Releases · openx6x00.org
A release every Friday. We try to put out a new version each Friday: mostly bug fixes, with one or two new features. The radio fetches it itself (Settings > Info > Update), and the release notes say what each one fixes and adds.
Open a bug report, one problem per issue, after a look at the open issues. Its form asks for these; please give:
- The radio: X6100 or X6200.
- The versions, from Settings > Info: the OpenX6X00 version and the Baseband version (see The baseband below). Say whether the card was written from an image or updated in the radio, and from which version.
- What happened: what you did, what you expected and what you got. Give the mode, the band or frequency, the power setting and the menu you were in. A photo of the screen helps, above all of a message or of the TX panel.
- Power and antenna: an external supply or the battery; an antenna, a tuner or a dummy load. For a transmit problem, give what the TX panel or the S-meter box shows while transmitting (PWR, SWR, ALC), and what an external wattmeter shows if you have one.
- The logs, from the card's DATA partition: attach the newest files of
the
app_logsfolder, from the card in a PC or from the web configurator's Files page. Each run of the radio software leaves onex6100_log_*.txt. From v0.3.4 a power-off with the POWER key saves the running one too, so switch off right after the problem. For a start that stops at the boot logo or a dark screen, attachapp_logs/start_trace.txt: how far each start got, from power-on (on the card's DATA partition in a PC when the radio does not start far enough for the web configurator; see the manual's Troubleshooting). - WiFi: from v0.3.4 a failed join writes
app_logs/wifi.txt, with no password in it. Add the exact message on the screen, the router's security (WPA2, WPA2/WPA3, WPA3 only), its 2.4 GHz channel, and whether a phone hotspot works. - Audio and Bluetooth: what you heard (the received audio or your own transmission), and the volume, mute and headphone settings.
Open a feature request
whose title starts with Feature: and names it in a few words
(Feature: SOTA spots), one feature per issue. Look at the open ones
first: if the feature is there, add what you would use it for to that issue.
Please give:
- The radio: X6100, X6200 or both, and the OpenX6X00 version you run (Settings > Info).
- What you want to do: the operating it is for (an activation, a contest, a remote station, a digital mode), not only the feature: "log a Tiles activation from the GPS" says more than "add Tiles".
- How you do it today: on the radio, with a program on a PC, a phone app or another firmware, and what is missing or awkward about it.
- Where it would live: an app under APP, a Settings tab, Field Ops, the web configurator, the Panel or Screen page, TCI; what you would press and what you would see. A sketch, or a screenshot of another program that does it, helps.
- What it depends on: a programme, a service, a protocol or a device, with a link to its rules, its API or its specification, and whether it needs an account or a key.
- How you can help: testing it on your radio, a pull request, the documentation.
The form asks for each of these, and labels the issue enhancement. One feature per issue lets each be answered, built and closed on its own. New features go into the Friday releases one or two at a time, after the bug fixes, so a request may wait a few weeks even when it's a clear yes.
Each radio runs two firmwares. OpenX6X00 is the Linux side, on the card. The baseband is the firmware of the radio board (DSP, RF, power, keyer), from Xiegu. OpenX6X00 talks to it and never changes it. Settings > Info > Baseband shows its version.
X6100
| Baseband | What it is | With OpenX6X00 |
|---|---|---|
| V1.1.8 (240915003) | Xiegu's base on most radios since late 2024 | Works. The bench X6100 runs it. |
| V1.1.9 (251127001) | Xiegu's newer base. Some radios carry it, not yet flashed, on their internal memory. | Should work: OpenX6X00 uses its zoom and IF shift, as the upstream GUI did. Not yet run on the bench. |
| x6100_base_patch r13 | gdyuldin's patched base, built on V1.1.6 | Works. It adds the TX audio and calibration options (compressor shape, band output gain, TX filter, CESSB, FM emphasis) and a battery percentage from a measured discharge curve. On a radio that shipped with V1.1.8 we saw its power about 10 % high at 5 W and 20 % high at 10 W before calibration, next to no power on the first transmission after a band change (on 6 m nearly always, on other bands now and then), and the external voltage read as 0 V (TODO.md). |
X6100-Baseband v0.1.0-alpha.2 (tx1a2-test) |
TEST ONLY, not validated on a radio. RF.Guru's own test release on V1.1.9 (251127001), with a compressor/gate, CESSB and an adjustable TX filter added. A base file you can install, with Xiegu's own system, as its TESTING.md says. | For testing only, into a dummy load first. Its RF output and power, its timing and the way back to Xiegu's base are still to be checked on a radio. OpenX6X00 from v0.3.13 on knows it by its exact version and shows its compressor, CESSB and TX filter, marked TEST ONLY, with the compressor and CESSB off at each start (manual). An older OpenX6X00 runs it as Xiegu's V1.1.9, without them. |
The settings that need a newer base are hidden when the base is too old.
X6200
| Baseband | What it is | With OpenX6X00 |
|---|---|---|
| Older than 1.0.7 | Xiegu's earlier bases (1.0.6 in issues #94 and #95) | Not supported: update the base. OpenX6X00 reads the base's data in the form 1.0.7 brought in, as 1.0.8 sends it too. On 1.0.6 the waterfall stayed black, the S-meter at S1, with no battery reading and a tuner that did not tune, until the base update. The SWR protection and the TX meters come from the same data. The sound comes another way, so listening and the digital apps' decoding can still work, but without the base's data the radio does not transmit from the screen, the apps, the CW messages or the USB paddle. The hand mic's PTT, VOX and a key in the KEY jack still transmit then, with no SWR protection and no power reading (manual). It says "No data from the base" 60 s after a start (manual). |
| 1.0.7 | Xiegu's base | Works, with a fault of the base: its S-meter can stick at -255 dBm, which OpenX6X00 shows as S1, -121.0 (issue #14, where the battery and TX readings still came through). 1.0.8 fixes it. |
| 1.0.8 (August 2026) | Fixes the CW keyer speed and an S-meter stuck at -255 dBm, adds CW macros | Works. The bench X6200 runs it. |
The X6200's settings show only what its base can do. OpenX6X00 v0.3.1 to v0.3.3 lose the transmit power about a second into a transmission on the X6200, on both bases (issues #1 and #8). v0.3.4 fixes it: tested into a dummy load on 1.0.7 and 1.0.8.
Updating the X6200's baseband from OpenX6X00: Settings > Info > Base
firmware lists every base Xiegu has published, fetches the one chosen from
xiegu.eu and writes it, without Xiegu's own system and its card swaps; or from
a computer over SSH, tools/base_update/flash.sh. It does what Xiegu's own app
1.0.8 does from its UPGRADE screen, step for step, and only ever writes an
X6200's base with an X6200 file
(tools/base_update,
manual). The radio asks xiegu.eu
only when its owner does: Get and Check in that window, and a once-a-day look
for a newer base that is off by default. To turn the daily look on:
Settings > Info > Daily base check.
The X6100's baseband is written by the same writer from a computer over
SSH, tools/base_update/flash.sh --file with Xiegu's X6100 file (V1.1.8,
V1.1.9) or RF.Guru's test base, the X6100's way into its bootloader (its Morse
key line held low while the base is reset); --dry-run goes in and out again
without writing (manual).
Updating the baseband: with Xiegu's own system, which stays on the radio's internal memory when OpenX6X00 runs from the card.
- Run the radio from a 13.8 V supply (3 A or more) with the battery out, for the whole update.
- Write Xiegu's update image for your radio (from
xiegu.eu, for example
x6200udimg-260820001.zipfor the X6200's 1.0.8) to a spare microSD card, not the OpenX6X00 one. Boot the radio from it: it writes Xiegu's system to the internal memory in about a minute, then switches off. - Take the card out and switch on: Xiegu's system starts. System Setting >
Firmware Upgrade, choose the new file (
x6200_mcu_20260820141208.xgffor the X6200's 1.0.8), UPGRADE, wait for 100 %, QUIT. Then Factory Reset, which clears Xiegu's settings only. - Switch off, put the OpenX6X00 card back and switch on. OpenX6X00 keeps its settings on its card.
Xiegu's tutorial: X6200 firmware upgrade. The patched X6100 base comes with its own instructions, and so does RF.Guru's X6100-Baseband test release (its TESTING.md, with the way back to Xiegu's base).
| Digital modes | FT8, FT4 and FT2 (CQ, reply, auto sequence, Hound, POTA tag, ADIF log), JS8 (JS8Call compatible, all four speeds at once, inbox, relays, heartbeats, APRS), WSPR (decode and beacon, WSPRnet upload), PSK31, PSK63, Olivia, Contestia, JTTY, RTTY, SSTV (receive with VIS, transmit with templates, denoise), WeFax, and NavTex with DSC (receive only). FT8, FT4, FT2, JS8, PSK, Olivia, Contestia and JTTY decodes go to PSK Reporter (on by default), and the FT8 app sends WSJT-X UDP for GridTracker and loggers. No PC, no sound card cable: APP > Modes. |
| CW | A decoder that copies down to about 0 dB SNR with Parse splitting run-together words, CW as you type (a line on the main screen from a USB or Bluetooth keyboard, and the CW Keyboard app, APP > CW Keyboard, with one or with the on-screen keyboard) with a send queue and Live mode that keys each letter as it is typed, messages with {CALL} and {HIS}, USB and Bluetooth paddles, a CW trainer. |
| DX Cluster | Spots on the waterfall, in a column beside it and in a full app that follows the VFO; filters by mode, band, activity (POTA, SOTA, WWBOTA, HOTA) and the spotter's country (only the spots heard in PA and ON, say), alerts on calls and prefixes, spot snap when turning slowly; fifteen public servers built in, DXFUN by default. One login, a Link switch, and a login of its own if you set one (your call with -2, on the web Cluster page) so a logger can use the call at the same time. |
| Field Ops | A second interface for SOTA, POTA, WWBOTA, HOTA, WWFF, TOTA, WCA, MOTA, lighthouse (LH, ARLHS) and LLOTA (lakes and lagoons) activations with big tiles for gloves: the summit or park found from the GPS or the locator, the references of the whole world offline after one Update list with internet, CQ, a log straight to ADIF with the references, self-spots to pota.app, wwbota.org, cqhota.app and the WWFF Spotline (the last two with your own key) and to the DX cluster (the only spot for SOTA, TOTA, WCA, MOTA, LH and LLOTA), QRZ Logbook upload. Tiles on the Air: the 6-character locator square you are in, from the GPS, with the eight around it. |
| Wavelog | Every QSO the radio logs, in every mode, goes to your own Wavelog a few seconds later: a queue on the SD card while there is no network, the station profile chosen by the radio's callsign (DF8MH, DF8MH/P), the result on the display. |
| Winlink | Winlink email over HF from the radio alone, no computer and no internet: Pat is the mail program, its mailbox a web page on a phone or a laptop, and ARDOP the modem, through the radio's own audio, or Mercury (experimental: faster, with the few stations that run it), or XARA (experimental: speaks VARA HF, so the VARA HF gateways answer it; VARA's free speed unless you tick that you hold a VARA HF licence, which the radio does not check). When Pat calls a gateway the radio tunes there in USB-D and keys itself. Turned on in the web configurator, Operating > Winlink, with your callsign, locator and Winlink password; the page shows the radio as Winlink will use it and how each connection went, with what to do next (manual). With no phone at hand, APP > Mail reads, writes and sends the same mail on the radio itself, with the touch screen, the MFK or a keyboard (manual). |
| Bands | A live picture of 160 to 6 m from the cluster and the Reverse Beacon Network, and a test beacon that shows who hears you from your own antenna. |
| Propagation | Solar data and the band forecast (N0NBH, kept for when there is no network) on a world map with your QTH, the night and the grey line, and the 18 NCDXF beacons followed through their 3-minute cycle: which you hear, how strong, on which band. |
| Scanner | Stops on activity through the memory channels, the airband (X6200), the 40 CB channels or the band plan segment you are in, the speaker quiet while it looks; a level learnt per frequency, lockouts, hang time. Receive only. |
| Voice links | Zello and SVXConnect (the talkgroups of an SvxLink reflector, with the certificate requested from the web page): talk from the hand mic or a Bluetooth headset, and a Simplex repeater between the network and the frequency you are on, which keys only inside the amateur bands, with a CW ID (every 60 minutes by default), a time limit and a pause; one link at a time. DMR: a DMR network's talkgroups heard over the internet with your own DMR ID, listening only (FreeDMR or another network of the MMDVM hotspot protocol). |
| On the road | Internet radio (the radio-browser.info directory, favourites; AAC, Ogg, Opus, FLAC and HLS stations from a new card image), < 8000 a href="/Guru-RF/OpenX6X00/blob/main/docs/MANUAL.md#weather">Weather (Open-Meteo's forecast and MeteoAlarm's warnings for where you are), Flights (the aircraft around you), HF Air Band (VOLMET and the oceanic air routes) and CB (your country's channel plan); the last two transmit only with TX outside the amateur bands on. In JS8, GhostNet: its groups, its net schedule with reminders, and messages translated. The first-start guide asks the language and the country. |
| Radio | Band plan strip for IARU Region 1, 2 or 3, Auto from the GPS, the locator or the callsign, or the US sub-bands of your licence class with the rest in grey (60 m too, and a strip for each band you add; guidance only, it never stops the key or the microphone), 60 m on the band keys, which step over a band the radio cannot tune (4 m), a TX shift per band for FM repeaters and a QO-100 IF (split kept by itself, REV on the VFO key), Birdie Cal (the radio's own carriers found, marked, notched), S-meter in bars or a needle, long-press actions on every key, editable bands, memories and channels, the broadcast bands in AM, transverters (off by default), RX recorder, screen recording and screenshots, voice messages, SWR scan, Walkie Talkie portrait mode, PRE and ATT on the VOL 2:2 page, local time on screen with UTC in the logs. |
| X6200 | SAM and WFM on the AM key, zoom 1 to 4 over the base's 384 kHz, the two-ring MFK, FM broadcast (87.5-108 MHz) and the airband (118-137 MHz) to receive after 6 m on the band keys, Xiegu's WR12 54 MHz-1 GHz receiver on the HOST port, driven over its USB serial port when its switch is on (from 54 MHz up the radio listens through it, 2 m and 70 cm included, and transmits nothing meanwhile; gpsd leaves it alone; not yet tried with a WR12, manual), the PA bias from its own base's factory calibration, as Xiegu's firmware does (manual), PRE and ATT on the VOL 2:2 page since it has no PRE key, the volume over the base's whole range (0 to 100), the low-battery power-off at 7.0 V, minutes before the base cuts the power by itself, also on a supply the radio reads under 12.0 V (Xiegu's 12 V charger among them), which did not hold a flat battery up (manual). |
| Screen | DRM/KMS output with the GUI on a transparent layer over a waterfall drawn one line at a time, about half the CPU of the old path, or, by default, as a 3D band scope (the last seconds in perspective, coloured by strength; Settings > Display > 3D off for the flat waterfall); a main knob with every detent timed in its own thread and acceleration that grows with the speed; the buttons hidden after a few seconds without a key, for the waterfall down to the bottom (Settings > Display > Hide buttons, off by default); a screensaver, Matrix rain, after 5 minutes without use, the screen dark after it or not, as set (manual). |
| Themes | Every colour, corner, font and waterfall palette comes from the theme. RF.Guru, Classic, Outdoor, Outdoor-Negative, VISION, Black Metal, Total Black, 1bit and Amber Trey (an amber segment LCD) come with the image; Holo and Material 3, and Codec (green phosphor boxes with corner brackets, its own monospaced font and a SIGNAL bar meter) and Ops Room (amber operations-room frames in Roboto Condensed, with a TRANSMIT band while the radio transmits), both designed by Trey (rewtraw), are in themes/ to copy to the card; your own go on the card too (docs/THEMES.md). |
| Wireless | WiFi (a failed join says why on the screen), a USB Ethernet adapter with DHCP or a fixed address, USB tethering, a network name of your own; Bluetooth CAT for three clients, headphones and keyboards with pairings that survive a new image. |
| Browser panel | http://x6100.local/panel (x6200.local on an X6200): the radio worked natively from a phone, a tablet or a PC, portrait or landscape: the spectrum and the waterfall live (tap or drag to tune, pinch to zoom), the frequency, band, mode, step and zoom, every switch and level, the S-meter, the DX spots (tap to tune), the FT8 app (decodes, tap to answer, CQ, auto, hold), the CW decoder's text, a log entry, RX audio and the browser's microphone for TX, a light theme for the sun. What the closed phone app does, as a web page. |
| Browser remote | http://x6100.local/remote (Remote > Screen in the web menu): the radio's screen live in any browser (up to four browsers at a time, the Panel and Screen pages together), every key and knob, RX audio and the browser's microphone for TX, a Picture choice (Sharp, Balanced, Fast) for a slow link, for the radio's own menus and apps. |
| Remote station | A browser watches until it is paired with a six-digit code from the radio; one holds the control at a time (a browser, a TCI client or the radio itself). Sound and Mic go over the TCI server; the microphone needs the https page. A key pressed without the control offers Take control, and Speaker always off (Settings > Audio) keeps the speaker silent. |
| Tailscale | The radio on your own tailnet, so a laptop or a phone with Tailscale reaches it from anywhere (the configurator, the Panel and Screen pages, TCI) with nothing opened on the router. Turned on in Settings > Wireless or Remote > Tailscale; the login is a code on the radio's screen or a link on the web page. Tailscale's own build is downloaded once (37 MB) and checked against a pinned checksum (manual). Funnel puts the browser Panel alone on the internet, for browsers paired at home (manual). |
| Web configurator | http://x6100.local/ (mDNS, x6200.local on an X6200, or the radio's IP): bands, digital frequencies, memories, cluster, Field Ops, Wavelog, CW messages, macros, logs, files, a gallery, backup and restore, display, time, network name, Ethernet, TCI, the SSH keys (SSH takes keys only, no password), the update. No login; pages from other sites are refused. |
| TCI server | The VFO-Knob and any TCI client on the network: tune, mode, filter, AGC, PTT, the meters and the audio both ways; the clients may be set to Listen only, all of them together. |
Taken on 25 October 2026 on an X6200 (base 1.0.8) on an antenna, during the CQ WW SSB weekend: the signals, decodes and spots are real. The X6100 runs the same GUI. How they are taken: docs/screenshots.
Walkie Talkie: the radio held upright |
| Browser panel on a desktop, with the spots | The same panel on a phone |
Browser remote: the radio's own screen live, its keys and knobs, Sound, Mic and the Picture choice.
More Settings tabs
- Download the image for your radio from the
latest release:
OpenX6X00-x6100-v<version>-sdcard.img.zipfor the X6100,OpenX6X00-x6200-v<version>-sdcard.img.zipfor the X6200. - Write the image to a microSD card (a branded one, 8-32 GB) with
balenaEtcher: select the
.img.zipas it is and let it verify what it wrote. Rufus works too, but does not verify. If Windows then offers to format the card, choose Cancel. - Put the card in the radio and switch on, the first time on external power:
press POWER briefly and give it a minute (the screen stays dark for the
first seconds). Settings and logs live on the card's DATA partition (
/mnt).
After the first install the radio updates itself: Settings > Info > Update (or System > Update on the web page) fetches the latest release's bundle for its model from GitHub, checks its signature, installs it and restarts the radio software, keeping the previous version for an automatic rollback if the new one does not come up.
A new card image is needed only when the kernel, a driver, U-Boot or a system package changes. From v0.3.4 the radio says so: Check shows when a release also has a new card image for that radio and what it brings, and Settings > Info > Update keeps saying it until the new image is on the card. The update installs everything else meanwhile.
A new image normally keeps DATA: the image is smaller than the card, so the DATA filesystem stays where it was and the first start adopts it again, and takes back the WiFi networks and the SSH keys that v0.3.4 and later save there at every clean power-off. Download the Backup from the web configurator first all the same (the manual says what it holds); a card-wiping tool or a smaller card would lose it. For the baseband versions and how to update them, see The baseband.
Up to v0.3.8 the first start of a newly written card (new, or wiped) left DATA unformatted, and the radio kept its settings and logs on the system partition (a PC shows the card's third partition as unknown). Now the first start after the update formats it and moves them onto it; leave that partition alone on the PC (more).
Reach the radio from anywhere, with nothing opened on your router: Tailscale puts it on your own private network, your tailnet. With Tailscale on a laptop or a phone, the web configurator, the Panel and Screen pages and TCI work as they do at home, also behind a mobile or satellite connection.
- On the radio: Settings > Wireless > TAILSCALE, or Remote > Tailscale on the web configurator. The radio needs the internet.
- The first time, it downloads Tailscale from Tailscale's own site (37 MB) and checks it against the checksum that comes with OpenX6X00.
- Log in: scan the code on the radio's screen with a phone, or press Log in to Tailscale on the web page. A free Personal account will do.
- From the laptop or the phone, with Tailscale on:
http://<the radio's name>/, with/paneland/remoteafter it, and TCI on port 50001.
Everyone on your tailnet reaches the radio as if they were at home, and the web configurator has no login: share the radio only with people you would let in. Tailscale runs in userspace mode, its log upload is off, and the login stays on the radio. More in the manual.
Tailscale Funnel puts the browser Panel on the internet for devices without
Tailscale, at https://<name>.<tailnet>.ts.net/panel (Settings > Wireless >
TAILSCALE > Funnel, or Remote > Tailscale). Only the Panel and the Screen page
go there, and
8BD0
only for browsers paired at home: pairing is refused from the
internet, so a browser is paired on the home network and then gets its key
for away with Use away from home on the Panel. The web configurator, TCI
programs, the Winlink mailbox and SSH stay on your LAN and tailnet. Funnel
names are listed in public certificate logs (manual).
OpenX6X00 is a fork of the last fully open-source release of the X6100 firmware by Giovanni Ricciardi IU1WXY, v0.127 of 17 October 2026, which was published under the LGPL-2.1-or-later. That firmware stands on the R1CBU GUI by Oleg Belousov R1CBU and Georgy Dyuldin R2RFE (gdyuldin/x6100_gui) and on the decoders of 1KO125 by Hany El Imam. From v0.128 the IU1WXY firmware went closed; this project continues the open line. The X6200 runs the same GUI on Aether Radio's X6200 control library by gdyuldin. The GUI stays LGPL-2.1-or-later, the JS8, WSPR, JTTY and PSK Reporter parts are GPL-3, so the image as a whole is GPLv3, exactly as before. The copyright notices of every author stay in the files.
Removed, so that nothing on the radio talks to a server of its own:
- the X6100 Link phone app and its remote API: the
/link/v2routes, the Link's Remote page, the GUI's remote socket with its spectrum, audio and event streams, and the phone voice PTT on UDP 50010; - the wfview LAN server;
- the x6100-link.it update channel: its update without the microSD, signed packages, update alert, remote updates and Settings Update tab;
- the diagnostics upload, the site ping and every other telemetry;
- the private tests and tools.
Added:
- the X6200, the same GUI behind a backend of its own
(
src/hw/x6200/hw_x6200.c); - a TCI v2.0 server (Expert Electronics' protocol, as AetherSDR serves
it) over a WebSocket on port 50001, on by default on whatever network the
radio is on, WiFi or Ethernet: Settings > General > TCI SERVER on the radio,
System > TCI on the web page. It carries
vfo,modulation,rx_filter_band,agc_mode, RIT,drive,trx(PTT, with,tcifor the client's audio as the microphone), the S-meter and the TX meters, the RX audio stream (in the format each client asks for: TCI's 48 kHz float32 stereo by default, 24 kHz int16 mono for the VFO-Knob and the browser pages) and the TX audio frames. No login: set Clients to Listen only, or turn it off, on a network you don't trust (the browser pages' Sound and Mic go over it). Config in/mnt/tci.conf(enabled=0|1,port=50001,trust=operate|view); - the browser panel and remote, local only, on the radio's own WebSocket (port 50002, no outside server), with pairing and one control holder, in place of the Link's;
- a signed update from GitHub Releases, with rollback and the card-image notice, in place of the x6100-link.it channel;
- the TOTA, WCA, MOTA, lighthouse, Tiles and LLOTA programmes in Field Ops, and the network name (mDNS);
- the RF.Guru default theme and the OpenX6X00 boot logo;
- a local configurator socket (
/tmp/x6100_cfg.sock) for the web pages that set the display and the Ethernet port, in place of the remote socket; - SSH with keys only: every radio had the same root password, so password
logins are off. Add your computer's public key on the web configurator,
System > SSH (
ssh-keygen -t ed25519makes one; paste the line of~/.ssh/id_ed25519.pub), thenssh root@x6100.local(manual).
The images are built by
AetherX6100Buildroot and
AetherX6200Buildroot, our forks
of Aether Radio's trees (OpenX6100,
gdyuldin), with this repository as
their GUI package. A change upstream reaches an image only once it is merged into the
fork: every build checks, and says at its start and end (on GitHub as a warning on the
run) when upstream has commits the fork has not, and names upstream's other branches
with newer work (pull requests on their way) as a note. The X6100's upstream is
gdyuldin's tree, moved to OpenX6100. buildroot/local-build.sh patches the
buildroot tree (local GUI and web server, boost and fftw-single for JS8,
no RHVoice, the boot logo), builds it and makes the update bundle. U-Boot's
release tarball is checked against its SHA-256; when ftp.denx.de doesn't answer,
the script makes it from U-Boot's tag on GitHub (the tar inside is the
release's, and bzip2 gives back the release tarball). The GitHub
Actions workflow (.github/workflows/main.yml, Build image, run by hand,
about two hours, both radios side by side) runs that script and uploads
OpenX6X00-x6100-<ref>-sdcard.img.zip and OpenX6X00-x6200-<ref>-sdcard.img.zip
with their bundles as workflow artifacts; run on a tag, it also attaches them
to that release (the releases since v0.2.2 were built locally and their files
attached by hand). Locally, the same build runs in a container: clone the
buildroot tree with its submodule (git clone --recurse-submodules https://github.com/Guru-RF/AetherX6100Buildroot) next to this repository
(itself cloned with --recurse-submodules), then, from this repository's
folder,
docker build -t openx6x00-build buildroot
docker run --rm -u $(id -u):$(id -g) -e HOME=/work/.brhome -v $(dirname $PWD):/work \
openx6x00-build bash /work/OpenX6X00/buildroot/local-build.sh
leaves ../AetherX6100Buildroot/build/images/OpenX6X00-x6100-local-sdcard.img (about
an hour the first time, 20 cores; buildroot/local-build.sh has the patch
steps, buildroot/Dockerfile the Ubuntu 22.04 host with CMake 3.28 and
sqlite3). The X6200 is the same GUI on its own buildroot tree,
AetherX6200Buildroot
cloned next to this repository: the same command with -e MODEL=x6200 leaves
../AetherX6200Buildroot/build/images/OpenX6X00-x6200-local-sdcard.img and the
OpenX6X00-x6200-v<version>-update.tar.gz bundle (the updater on a radio takes
only its own model's bundle). The radio's backend is src/hw/x6200/hw_x6200.c
behind src/hw/hw.h, chosen with cmake -DHW_BACKEND=x6200.
With the X6100 buildroot tree already built, buildroot/build.sh rebuilds the
GUI alone with its toolchain (for the X6200, point buildroot/conf.sh at its
tree and add -DHW_BACKEND=x6200 to the options in buildroot/build.sh)
(docs/UPSTREAM_README.md, manual, Build).
On a PC, host/build.sh builds the GUI in an SDL window on a stub radio
(host/README.md).
src/ the GUI (x6100_gui): main screen, apps, settings, decoders, TCI server
hw/ the radio behind hw.h: x6100, x6200 and a stub for the PC
cfg/ params/ the settings (SQLite params.db) and their C/C++ API
ft8/ js8/ wspr/ sstv/ wefax/ navtex/ cw_decoder/ cluster/ field/ qth/
fonts/ widgets/ LVGL fonts and custom widgets
third-party/ js8core (JS8Call's modem, GPL-3), wsprd (WSJT-X, GPL-3), cty.dat, the Winlink
modems ardopcf (MIT) and Mercury (GPL-3, with our x6x00-mercury)
lvgl/ lv_drivers/ LVGL 8.3 (gdyuldin's NEON fork, a submodule) and its drivers
webserver/ the web configurator (Python, bottle)
rootfs/ init scripts, helper scripts (x6100-update, x6100-field, x6100-pota-spots,
x6100-broadcast-update, x6100-hostname, x6100-tailscale, x6100-wifilog,
btcat-ctl, btaudio-ctl), data files
btcat/ bootanim/ Bluetooth CAT bridge, boot animation
boot/ boot logo
sql/ the default params.db
themes/ the Holo, Material 3, Codec and Ops Room themes to copy by hand (make_codec.py and
make_ops_room.py draw their images); make_rs.py, a
look cut from a screenshot of another maker's software (personal use, not installed)
buildroot/ local-build.sh and Dockerfile (the image), br2_external/ and x6200/
(what it adds to and patches in the buildroot trees),
build.sh (the GUI alone with the buildroot toolchain)
host/ the GUI on a PC (SDL, stub radio)
tools/ screenshots/ (drive.py, grab.py, pull.py), update/ (the bundle), pat/ and
xara/ (the Winlink client and the VARA-compatible modem, built from Pat's
pinned release and XARA's pinned commit with our patches),
tci/ and winlink/ (the TCI server's and the Winlink modem socket's host
tests), itu_region/ (the band plan's Auto region, a host test),
data_partition/ (S00adata on fake cards, a host test), channels/ (the
web Memories page, a host test), battery/ (the low-battery power-off and
the battery %, a host test), icons/, logo/ and fonts/
assets/ the logo's fonts and marks
docs/ MANUAL.md, THEMES.md, MENUS.md, UPSTREAM_README.md, audit/,
screenshots/ (taken by script on an X6200)
- Manual: every app and setting, the web pages, the TCI server, CAT commands, files, building.
- Themes: make your own.
- Menus: the icon grids, and how to get the text menus back.
- Screenshots: how they are taken.
- The TCI server's host test, the Winlink modems', the ITU region's, the DX cluster bands', the DATA partition's, the web Memories page's, the web Backup page's WiFi restore, the battery readings' and the PC build.
The GUI is LGPL-2.1-or-later (LICENSE); js8core and wsprd
(vendored), the JS8 and WSPR code (src/js8, src/js8_window.c, src/wspr,
src/dialog_wspr.c), JTTY (ported from WSJT-X by K1JT and the WSJT-X team,
src/jtty*, src/dialog_jtty.c) and the PSK Reporter upload
(src/pskreporter.c) are GPLv3, so the firmware image is GPLv3. Mercury, the
second Winlink modem (vendored in third-party/mercury, GPL-3.0-or-later, its
FreeDV part LGPL-2.1 with KISS FFT in it BSD-3-Clause, its iniparser, nanorq and
oblas MIT, see its UPSTREAM.md), and
x6x00-mercury, our program that links it, are GPL-3.0-or-later; both come in
the image and the update bundle, the source in this repository. ardopcf and
Pat are MIT. XARA, the third Winlink modem (x0rro's, carried on by NR5P, built
from NR5P's source by tools/xara/build.sh, with our patches), is MIT, and so
are the Rust crates in it as used here (some also Apache-2.0, Zlib or 0BSD),
with the Rust standard library Apache-2.0 or MIT; their texts are in the image
(/usr/share/x6100/licenses/xara), see
tools/xara/UPSTREAM.md. RADE, the RADE app's modem (tools/rade/build.sh), is
freedv/rade_c (BSD-2-Clause, with its kiss_fft, BSD-3-Clause) and the Opus fork that has
the FARGAN vocoder (BSD-3-Clause), linked statically into the GUI; its reader of the
callsign in FreeDV's own form (src/freedv_text.c) is ported from freedv/freedv-backend
(BSD-2-Clause, src/LICENSE-freedv-backend.txt). mbelib, the DMR app's
voice decoder (vendored in third-party/mbelib, ISC, see its UPSTREAM.md), is
an independent decoder written from the published P25 half-rate vocoder standard (TIA-102.BABA-1) and the
vocoder's patents, receive only; the AMBE+2 patents have expired in Europe, a US patent (US 8,359,197) may
apply there until May 2028. The web server is LGPL-2.1
(webserver/LICENSE). Every file keeps the copyright
notice of its authors.
Oleg Belousov R1CBU and Georgy Dyuldin R2RFE wrote the R1CBU GUI this firmware stands on (CW receiver, CW tune indicator, DRM/KMS output, direct spectrum rendering, the main knob handling); Rui Oliveira CT7ALW and R1CBU Aether Radio's X6100 control library, which Georgy Dyuldin (gdyuldin) carries on and made the X6200's from, with the X6200 GUI our X6200 port follows; Giovanni Ricciardi IU1WXY the rewrite of the GUI, the theme system, Field Ops, Bands, the DX cluster, WSPR, SSTV TX, RTTY, WeFax TX, the CW keyboard, the Bluetooth work and the layer system; Hany El Imam (1KO125) the WeFax, NavTex and SSTV decoders; Jordan Sherer KN4CRD and the JS8Call contributors the JS8 engine; K1JT and K9AN wsprd (made a library by VA2GKA); K1JT and the WSJT-X team JTTY; Rafael Diniz and Rhizomatica's HERMES project the Mercury modem; x0rro the XARA Winlink modem, which NR5P carries on; SP2KMO the Bluetooth tab, PSK31, PSK63 and Olivia, the WSJT-X UDP output, the FT8 country and distance, and FT2 (IU8LMC's mode); randal007 the PSK and Olivia merge, the Bluetooth scan and recovery, the JS8 map, the high-SWR guard and the digital-mode drive level; 2E0JFS the Black Metal and Total Black themes.
Pull requests to OpenX6X00: OM0WT (Pavol Calfa, om0wt) the Amber Trey theme (#98), independent VFOs, where a band key or a band edge moves the active VFO only (#60, #96), the TCI start that gives a browser its control back (#97), the locator clear of NR NB DNF (#99) and Settings pages that scroll to their end (#61); EA4ILN (ea4iln-debug) the X6200's TX power caps (#75), its charger setting in the top bar (#76), the base's warnings (#77), the H-22's band keys (#136), the SWR scan's SWR (#140) and the base's own band table while the WR12 is in use, with docs/WR12.md (#176), and on his radio the finds behind the PA bias (#173) and the base's byte 280; Chris Lawson (cjlawson02) the radio's ranges (#171) and knob steps (#188) in board.h, the panel size from BOARD_DISP_W/H with a landscape blit (#162), taps on the F-bar and decoded keys (#163), the spectrum left unpainted while hidden (#177) and TCI's drive, VFO limits and RIT clamp from board.h (#189); Calin Rigo (timerealm) the 3D band scope (#161); Spyyena Contestia (#154) and the SSH page's FIDO2 security keys, with verify-required or no-touch-required (#274); DF8MH the Wavelog upload (#12); Trey (rewtraw) the PC build in Docker (#180), LVGL's clock from CLOCK_MONOTONIC (#182), the GUI loop that wakes on keys, knobs and events (#183), the Propagation and Scanner apps (#184), APPS and Modes over the whole strip, the CW bars off the band plan and Settings' switches in the theme's colours (#185), the Codec and Ops Room themes (#186, #187) and the performance overlay (#181); jochenhammes the RADE app (#129, #130) and APP > Mail, Winlink mail read, written and sent on the radio (#295); MAVProxyUser tools/data_partition on Debian and Ubuntu, with parted, mkfs.vfat and blkid in /usr/sbin (#287), and the X6200's base firmware updater, from the radio's screen and over SSH, Xiegu's UPGRADE steps with their tests (#259), which also writes the X6100's base, by the way in of Franco Venturi's (fventuri) x6100-base-experiments flasher; erikkt a keyboard's and a Bluetooth knob's volume keys on the RX volume, never the CW paddle (#306), and Tuning steps from, to, the range of steps FST, a keyboard's + and _ and a knob's Step go through (#314).
From their forks: condoruy (Cóndor Tecnológico, the CX8ANM edition) the GUI's languages, the hook that passes every text to LVGL through the language and the matching line by line, with the first Spanish, French, German and Italian lists, and the first-start guide's language and country, the Weather, Internet radio, Zello, Flights, HF Air Band and CB apps, GhostNet in JS8, the spectrum's fill by level, the callsign on the boot logo, more German, Italian, French and Spanish from their v1.1.7 lists, the multiboot card's warning before a new card image, the weather from the locator or a place typed and DMR heard over the internet with mbelib; OlivLoze NOTA, XOTA, the map of a reference's surroundings, the phone's position and clock from the Panel, the WeFax commands of the browser remote, WeFax's Auto Plan and its plan named from the charts received (Northwood's night charts on 2618.5 kHz too), Bulletin (the newest copy of fair quality), All Charts as tiles, full-screen viewer, Fix over the full screen, Auto Tilt, the view waiting for the next chart and Night, the clock from a time station's minute marker and ntpd's own word, JS8's board of stations (red for 3 minutes after an answer), its lane over the waterfall and its conversations with their way back, FT8's tiles, the calls over its waterfall, its list by slot with the CQs standing out and its buttons by task, and the browser's Apps pages, which open their app on the radio: FT8, JS8 with its chat and WeFax, their waterfalls, maps, flags and countries; Chris Lawson (cjlawson02) the spectrum's dB without powf and log10f and the paddle keyer's start after the settings.
Patches, captures, logs and tests from the issues: BrunoKlu the capture and the driver patch of #29; KR8MER the diagnosis and the patch of #50; marcoverheiden the panel tests of #239 that found the cure for the stripes, and R4D4R the photos and readings there; DL9RP the S-meter measurements of #125; 123tcpip (Bob G6CKK) the start-pulse captures of #53; ea4iln-debug and edegraaff the battery logs; km4gkd, amystikis (M7SVA) and joanpao (EA5JTT) the Winlink logs from the air; doodlecomms the Mercury and XARA leads; firatsoygul the tests over https, a tailnet and Funnel; SQ9SZ how LLOTA's spots are posted. And everyone who opened an issue: 123tcpip, airis01, Al-k6avp, amystikis, andybateman, AndyKeir, Arizona-Steve, baumertjohn, bbear1153, BG7JAF, BrunoKlu, ct7arf, ctsquid, DC6NS, Derek000, DG1SMD, DL1EJD, dl1sdz, DL9RP, doodlecomms, dr4g0nized, ea4iln-debug, ea8ee, edegraaff, ericb2B, erikkt, F4ESO, F8GHE, firatsoygul, Flight3R, forshaws, fredfeierstein, gati111, gilcomnz-eng, giuseppepassera61-dot, gogoterie, Guecar66, hecpilot, in3fob, ItsRonan-Honest, joanpao, jochenhammes, johny1time-code, jonnybb1, K3SLH, K4DB, KB0WLF, kb3hjc, KC7BJE, Kealper, keithwhite1982, kj7prs, km4gkd, KR8MER, kutteg, Lomax73X6X00, marcoverheiden, Meges111, morel666, muratbedir, nmunlin, oh8mbu, OlivLoze, on2lvc, ON2ON-HAM, orome, oxoocoffee, pat0691, peterbmarks, pkoerner81929, PLAN8VR, Qinka, RjulianTN, RSZ-Nld, rwensley, sa5qed, scotty123, SQ9SZ, srg9832, stevearish, theMadCatter, UA0AOS, Urminme, VakrLothbrok, VariousGames, VR2XKP, W3POPat, W5CPB, W8LID, waydenie, WheezeNL, xes, XRF03, yo4cil and z1pppo78.
Libraries: LVGL, cJSON, FFTW, liquid-dsp, ft8_lib, libpng, Boost, Eigen, CRCpp, bottle, jQuery, mp4-muxer, PulseAudio, BlueZ. The country list is AD1C's cty.dat. The band plans are our reduction of the IARU Region 1, 2 and 3 band plans, 47 CFR Part 97 (FCC) and the ARRL band plan. Fonts: Roboto, Roboto Condensed (Black Metal's, Total Black's, Amber Trey's and Ops Room's, OFL-1.1, src/fonts/LICENSE-RobotoCondensed-OFL-1.1.txt), DejaVu, Arial, Sony Sketch, Inter (the boot logo), Terminus (the 1bit theme's pixel font, OFL-1.1, src/fonts/LICENSE-Terminus-OFL-1.1.txt), Noto Sans CJK JP (a subset: the screensaver's characters, OFL-1.1, src/fonts/LICENSE-NotoSansCJK-OFL-1.1.txt), Noto Sans CJK SC (a GB2312 subset: the Chinese language, OFL-1.1, rootfs/usr/share/x6100/fonts/OFL.txt), Share Tech Mono (the Codec theme's, OFL-1.1, src/fonts/LICENSE-ShareTechMono-OFL-1.1.txt). The skimmer spots come from the Reverse Beacon Network, the broadcast schedule from the EiBi list by Eike Bierwirth, and the Propagation app's solar data and band forecast from N0NBH (hamqsl.com). The Field Ops reference lists come from POTA, SOTA, WWBOTA, cqhota.app, WWFF, TOTA (OK2IH, wwtota.com), the WCA castle list as ON4VT keeps it, GMA (gma.rocks) for the mills and the lighthouses, and LLOTA (llota.app) for the lakes and lagoons. OpenX6X00 is maintained by RF.Guru (Joeri Van Dooren ON6URE).
OpenX6X00 is free and stays free. If it is useful to you and you would like to support the work: buy me a coffee.