8000 Releases · AndronixApp/andronix · GitHub
[go: up one dir, main page]

Skip to content

Releases

andronix 2.1.5

Choose a tag to compare

@imprakharshukla imprakharshukla released this 09 Nov 15:33

2.1.5 (2026-11-09)

Fixes for the most common reasons installs failed on 2.1.4. 2.1.5-rc1 was on the beta channel from November 5; this is the same code.

Downloads

  • A slow or flaky connection keeps going. A download that stalls but keeps making progress now resumes until it finishes. It gives up only after 8 attempts in a row that get nothing at all.
  • One dropped request no longer sends you to Docker Hub. When the check against our own download server fails once, the installer tries it again (up to 3 times) before falling back to Docker Hub, so a Docker Hub hiccup at "Finding the best download" doesn't fail the install.
  • Not enough room is caught before the download. The free-space check now counts the download itself as well as the unpacked system. A phone that fills up while unpacking stops right there with "not enough space" instead of failing later with a confusing error.

Package lists and signatures

  • A wrong date on the phone says so. If the phone's date is far in the past, the install now stops with "Your phone's date is wrong" and the date, instead of "Couldn't reach the download servers" or a signature error. Set the right date and run the same command again.
  • Arch and Manjaro install more reliably. The installer refreshes the signing keys before the first update, so "invalid or corrupted package (PGP signature)" no longer stops the install.
  • Package errors after switching mirrors are fixed. When a mirror failed mid-install and the installer switched to another, it could carry on with the old mirror's package lists and fail with "Unable to locate package" for common packages. It now refreshes against the new mirror, or stops with a clear message.
  • Clearer messages when package lists aren't signed or apt can't load its libraries, with the details in the install log.

Desktops and phones

  • Ubuntu 26.04 desktops install again. Ubuntu dropped the tigervnc-tools package; the installer now installs only the VNC packages the distro has.
  • The desktop reopens when another app's X server is running. Our VNC server no longer collides with another app's desktop on the same display, and a live X server's lock is never deleted as stale.
  • Phones with newer Android kernels (android15/android16): when proot crashes during a package step, the installer recognises it and tells you what to do instead of retrying forever, and it no longer turns on the kernel-version workaround that triggers the crash on kernels that don't need it.
  • User names are checked up front: reserved names (like root) and names already taken in the distro are refused when you choose them.
  • Problem reports keep their details when your user name matches a distro or desktop name (like kali).

Source: in-app Linux runtime 2.1.4

Choose a tag to compare

@imprakharshukla imprakharshukla released this 20 Oct 14:09

Corresponding source of the in-app Linux runtime shipped in Andronix app 10.1.6 (the build with installer 2.1.4): libandronix.so (installer 2.1.4) and the open-source libraries next to it.

  • proot 5.1.107.96 (Termux fork, GPL-2.0), built from the upstream archive plus the Andronix build scripts in standalone/proot. proot is unchanged from standalone-2.1.3 — the libraries are byte-for-byte identical (same libproot.so; the #229 shm-helper self-exec fix is already in it). talloc 2.5.0 (LGPL-3.0-or-later) and libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS (the source files and the six libraries in the app) and build.json.

Build scripts: https://github.com/AndronixApp/andronix (standalone/).

The proot build scripts (andronix.py, build.sh, inside.sh, Dockerfile, stops.py) are attached to this release and also live in standalone/proot/ in the repo. The only library that changes from standalone-2.1.3 is libandronix.so (the installer: more download retries and resume, and an edition-aware download label); proot, its loader, talloc and virgl are identical.

andronix 2.0.10

Choose a tag to compare

@imprakharshukla imprakharshukla released this 15 Oct 15:33

2.0.10 (2026-10-15)

2.0.9 was only a release candidate (beta); everything in it ships here too.

  • A phone where a tool inside the distro crashes is no longer told its network is at fault (support #470, #471): on some phones Termux's Linux layer makes programs in the distro crash (the signature checker gpgv) or fail with "Function not implemented", so every package list looked unsigned and the install said "your network is likely showing a sign-in page". The installer now recognises it, tries once more with proot's fast mode off, and if that doesn't help says to update Termux.
  • One PulseAudio for sound, not one more at every start: where Termux runs programs through Android's linker, PulseAudio's own check said it wasn't running when it was, so every andronix start launched another sound server (a dozen after a dozen starts), each one a process toward Android's limit of 32. The installer now asks the running server's socket first.
  • A desktop that lost one of its own packages gets it back (support #458): a Kali XFCE install without dbus-x11 (removed since the install) quit at once with "dbus-launch: not found". andronix update now puts back any missing packages of the installed desktop, and when the session can't start for that reason its log says which package and to run andronix update.
  • Distros with systemd install on kernel 3.10 phones (support #436, #438): systemd stopped with "Failed to take /etc/passwd lock: Invalid argument", because it locks the user database with a kind of lock Linux added in 3.15, and then every package that needs dbus or polkit stayed unconfigured (Kali; Ubuntu with KDE). On kernels before 3.15 a small shim now gives systemd the older lock instead.
  • The time zone your phone reports is always accepted (support #443, #435): Android still reports some zones by old names (Asia/Calcutta for India) that newer Ubuntu and Debian keep only in an extra package, so setting up the user, the last step of an install, failed with "Use a name like Europe/Berlin". The installer now maps old names to the current ones (Asia/Kolkata), accepts a name typed in another case, and never fails setup over a time zone: one it can't find keeps the current zone.
  • One install of a distro at a time (support #313): a second andronix install of the same distro in another Termux session (or while the app is installing it) failed on the first one's package lock, while the first finished fine. Install, update, remove and restore now hold a lock per distro, and a second run stops at once with " is being installed in another Termux session", saying to wait or close it and run the same command again. The lock goes with its process, so a crashed or killed run never blocks the next.
  • A resumed install waits for a leftover package run (support #296): when an earlier attempt's apt or pacman is still running under this distro's proot with nothing left to start it, the installer waits up to 5 minutes, then stops that leftover, finishes dpkg's configuration and tries again. A package run that belongs to a live install, or to anything outside this distro, is never touched.
  • Play Store Termux on a network that blocks termux.net says so (support #305): it read as a missing package. Play Store Termux has only one package server, so the message says your network blocks it and to switch network or use a VPN; other Termux keeps the mirror advice.
  • Fake root that didn't take is retried once (support #312): on some phones (seen on an Android 16 ROM with kernel 4.14), Arch stopped with "pacman-key needs to be run as root". The install now retries once with proot on ptrace only, and the log says whether that fixed it.
  • Fedora installs on x86 Chromebooks and x86 Android (support #326): Android's x86 app sandbox refuses the old file-creation system call that Fedora's package manager uses to import its keys ("Function not implemented"). A small shim, on x86 only and only where the check finds the call blocked, swaps it for the modern one. The fix that gives systemd its mount ids now also goes in wherever the check finds them missing, whatever the kernel (ChromeOS on 5.10).
  • Kali gets Mozilla's Firefox (64-bit; 32-bit phones keep Firefox ESR): Kali moved to FFmpeg 9, which Firefox ESR 140 can't load, so videos with H.264 or AAC didn't play. andronix update switches existing Kali installs: it installs Mozilla's Firefox from Mozilla's package repository (as on Ubuntu), keeps your Firefox profile (bookmarks, logins, history), points the dock, the Whisker menu favourites and your launchers at it, and removes Firefox ESR only when nothing else depends on it.

2.0.9 (release candidate only; shipped in 2.0.10)

  • A desktop added to a command-line install starts for your user (support #284): the user made at the first login of a command-line install never got the desktop's session files, so andronix desktop stopped with "The desktop session is missing". Installing a desktop, and andronix desktop, now copy what the user's home lacks from /etc/skel, never overwriting your files (VNC already did).
  • Andronix works on networks that block public DNS (card #141): where a network drops DNS to public servers, every install stopped at "Finding the best download" with "Couldn't reach the download servers", while curl and the Andronix app worked. The installer looked names up itself through public servers (Termux's 8.8.8.8, then 1.1.1.1), and so does the distro (its resolv.conf). Now both go through Android's own resolver (the network's DNS, or Private DNS): the installer asks it first, with the public servers as the fallback, and each session runs a small forwarder that glibc distros ask through an NSS module (hosts: files andronix [NOTFOUND=return] dns in nsswitch.conf, set again on every start). A name that doesn't exist answers at once; with no forwarder, lookups go to resolv.conf as before. Alpine (musl) keeps resolv.conf only. The install log says which resolver answered ("dns dl.andronix.app: android"). The 64-bit Termux build now links with Android's C library, like the other CPUs. ANDRONIX_DNS=go keeps the old behaviour.

2.0.8 (2026-10-10)

  • andronix report sends the failed run's own log, also for errors without one of their own; a newer run since (a "Try again") follows it, shorter. Before, such a report carried only the newest log, the retry's (support #255).
  • A question with no keyboard to answer it says so: when its input isn't a terminal, a prompt fails with "This needs a terminal" and how to run the command instead, and the installer's screens never try to open /dev/tty themselves (support #255 saw "could not open a new TTY: open /dev/tty: no such device or address").
  • sudo no longer prints "unable to send audit message" (Ubuntu 26.04 and other distros with the classic sudo): under proot, every sudo printed "sudo: unable to send audit message: Operation not permitted" even when it worked, which read as sudo failing (support #253). The installer turns off sudo's audit logging (Defaults !log_allowed, !log_denied in /etc/sudoers.d/andronix-quiet) when the user is set up, and on andronix update and andronix start for distros installed before. Not with sudo-rs, which doesn't know those settings.

2.0.7 (2026-10-09)

Desktops

  • A desktop with Firefox uses fewer processes, so Android (which starts closing apps' background processes past 32, for all apps together) is less likely to stop it. Firefox isolates only high-value sites (logins and the like) in their own process, as Firefox for Android does, with one shared content process and no fork server, and opens a blank home and new-tab page (Firefox's own start page needs a process of its own). XFCE starts without Thunar's background daemon (Thunar still opens when asked) and without the status tray. A desktop with Firefox and 17 tabs is about 29 processes under Termux, down from about 37. Firefox's settings apply on install and on andronix update and can be changed in about:config; XFCE's apply to new desktops.
  • A runaway X server can't fill the phone any more: the VNC server's log is capped at 16 MB (the kernel stops the server there), and the desktop session writes its own log. When Android stopped proot, an X server left behind wrote 10 GB of the same error in 20 minutes.

Package manager

  • A distro's own preparation step gets the usual recoveries: Ubuntu 26.04's switch to GNU coreutils (an apt install inside "Refreshing package lists"; today's images mostly have it done already) is now diagnosed, retried and logged like every other package step, instead of failing with no log.
  • A failing apt hook no longer stops a refresh: when none of the known hooks matches, the refresh runs once more without apt's update hooks (for that run only), and the hooks are logged.

Install

  • An install that was interrupted while a package was unpacking can be finished. The retry used to stop on "package is in a very bad inconsistent state; it should be reinstalled" every time; now it reinstalls the half-installed packages (removing any dpkg still refuses), finishes configuring the rest and tries again.

  • Kali gets through when its download server redirects in circles. Kali's kali.download now sends package indexes to http.kali.org, which can send them back ("Redirection loop encountered"). Kali now uses http.kali.org, Kali's own redirector to a nearby mirror, as its image does. When a mirror still loops or answers without its package index ("does not have a Release file"), the installer moves once to a direct mirror; if that fails too, it says your network or region is likely redirecting the package servers. An index sent to an https mirror before the certificates are installed is retried as a connection error.

  • Kali (and other distros with systemd 256 or newer) installs on 32-bit phones with kernels older than 5.8. The fix that gives systemd ...

Read more

Source: in-app Linux runtime 2.1.3

Choose a tag to compare

@imprakharshukla imprakharshukla released this 18 Oct 12:10

Corresponding source of the in-app Linux runtime shipped in Andronix app 10.1.3 (the build with installer 2.1.3): libandronix.so (installer 2.1.3) and the open-source libraries next to it.

  • proot 5.1.107.96 (Termux fork, GPL-2.0), built from the upstream archive plus the Andronix build scripts in standalone/proot (andronix.py applies the SysV-IPC shm-helper self-exec fix for Android' 10BC8 s linker, #229 — this is the one change vs standalone-2.1.2's proot). talloc 2.5.0 (LGPL-3.0-or-later) and libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS (the source files and the six libraries in the app) and build.json.

Build scripts: https://github.com/AndronixApp/andronix (standalone/).

The proot build scripts that apply the #229 change (andronix.py, build.sh, inside.sh, Dockerfile, stops.py) are attached to this release and also live in standalone/proot/ in the repo.

Source: in-app Linux runtime 2.1.2

Choose a tag to compare

@imprakharshukla imprakharshukla released this 15 Oct 13:21

Corresponding source of the in-app Linux runtime shipped in Andronix app 10.1.1 (the build with the installer switch): libandronix.so (installer 2.1.2) and the open-source libraries next to it.

  • proot 5.1.107.96 (Termux fork, GPL-2.0), talloc 2.5.0 (LGPL-3.0-or-later), libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS (the source files and the six libraries in the app) and build.json.

Build scripts: standalone/ in this repository at this tag; standalone/README.md says how to rebuild the libraries byte for byte.

Written offer: for at least three years after we last ship this version, we give anyone a copy of this source for no more than the cost of sending it: support@andronix.app, naming the app version.

Source: in-app Linux runtime 2.1.1-rc2

Choose a tag to compare

Corresponding source of the in-app Linux runtime shipped in Andronix app 10.1.1 (build 146): libandronix.so (installer 2.1.1-rc2) and the open-source libraries next to it.

  • proot 5.1.107.96 (Termux fork, GPL-2.0), talloc 2.5.0 (LGPL-3.0-or-later), libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS (the source files and the six libraries in the app) and build.json.

Build scripts: standalone/ in this repository at this tag; standalone/README.md says how to rebuild the libraries byte for byte.

Written offer: for at least three years after we last ship this version, we give anyone a copy of this source for no more than the cost of sending it: support@andronix.app, naming the app version.

Source: in-app Linux runtime 2.2.0-beta1 (beta installer)

Choose a tag to compare

Corresponding source of the beta installer in the Andronix app 10.1.1 (libandronix_beta.so, installer 2.2.0-beta1), which users can pick per distro instead of the stable one. It runs on the same open-source libraries as the stable installer 2.1.2 (release standalone-2.1.2).

  • proot 5.1.107.96 (Termux fork, GPL-2.0), talloc 2.5.0 (LGPL-3.0-or-later), libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS and build.json (the beta installer's sum, and the shared libraries' sums with the stable installer it pairs with).

Build scripts: standalone/ in this repository at this tag; standalone/jnilibs-beta.sh assembles the beta drop, standalone/README.md says how to rebuild the libraries byte for byte.

Written offer: for at least three years after we last ship this version, we give anyone a copy of this source for no more than the cost of sending it: support@andronix.app, naming the app version.

Source: in-app Linux runtime 2.1.0

Choose a tag to compare

@imprakharshukla imprakharshukla released this 11 Oct 08:58

Corresponding source of the in-app Linux runtime shipped in Andronix app 10.1: libandronix.so (installer 2.1.0) and the open-source libraries next to it.

  • proot 5.1.107.96 (Termux fork, GPL-2.0), talloc 2.5.0 (LGPL-3.0-or-later), libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS (the source files and the six libraries in the app) and build.json.

Build scripts: standalone/ in this repository at this tag; standalone/README.md says how to rebuild the libraries byte for byte.

Written offer: for at least three years after we last ship this version, we give anyone a copy of this source for no more than the cost of sending it: support@andronix.app, naming the app version.

Source: in-app Linux runtime 2.1.0-dev26

Choose a tag to compare

Corresponding source of the in-app Linux runtime shipped in Andronix app 10.1.0 beta (beta17): libandronix.so (installer 2.1.0-dev26) and the open-source libraries next to it.

  • proot 5.1.107.96 (Termux fork, GPL-2.0), talloc 2.5.0 (LGPL-3.0-or-later), libandroid-shmem 0.7 (BSD-3-Clause): unmodified source archives.
  • virglrenderer 1.3.0 (MIT) with virglrenderer-android.patch, libepoxy 1.5.10 (MIT).
  • License texts, README.txt (which file is what), SHA256SUMS (the source files and the six libraries in the app) and build.json.

Build scripts: standalone/ in this repository at this tag; standalone/README.md says how to rebuild the libraries byte for byte.

Written offer: for at least three years after we last ship this version, we give anyone a copy of this source for no more than the cost of sending it: support@andronix.app, naming the app version.

andronix 2.0.6

Choose a tag to compare

@imprakharshukla imprakharshukla released this 07 Oct 09:38

2.0.6 (2026-10-07)

Installs that get through

  • The Andronix server moves to api.andronix.app. get.sh and the installer (finding the download, the beta channel, Modded downloads, reports, telemetry) use api.andronix.app first and fall back to the old products.andronix.xyz only when it can't be reached.

  • A package-signing key problem is named as such. On some phones Arch's key tool (gpg-agent) won't start under proot, so the first package refresh can't make the keyring. The installer now clears the half-made keyring and tries once more, and if it still fails it says so (instead of "Couldn't reach the package servers") and asks for a report. Other non-network failures while refreshing package lists no longer say the servers were unreachable.

Termux:X11

  • A missing Termux:X11 app is named at the end of the install. When a desktop install finishes and the Termux:X11 app isn't installed, a box says where to get it (termux-x11-universal-debug.apk from the nightly release) and links the docs page with pictures. andronix desktop shows the same box. When Android won't say whether the app is installed and Termux:X11 then doesn't start, the fix names the app first.

Telemetry

  • With telemetry on, a failed install or update caused by the distro's package manager also reports proot's version and whether Termux started andronix through Android's linker (Play Store Termux), to find why package lists fail on some Play Store Termux phones with older kernels.
0