How to Cut Wine Bottles for Crafts

A great way to recycle old wine bottles is to use them for home decorations. However, if you need to change their shape for the craft, you'll find that cutting them takes a lot of practice. Moreover, since you're dealing with glass, it's very important that you learn to cut wine bottles the right way.

Method 1

Method 1 of 2:

Using a String

Download Article

You want to wrap it at least 3-4 times tightly around the widest part of the bottle. Then cut off the ends of the knot.
Keep it tight, trying to leave the string in a nice ring.

Advertisement
The acetone will burn, heating the bottle along your string line to make it break off cleanly. It only needs to soak for a few minutes.^{[1]
X
Expert Source

David Royce & Michael Boyd
Glassblowing Experts & Founders of Bicycle Glass

Expert Interview}
You can put the string anywhere, depending on how tall you want your bottle. This is more or less where the bottle will cut.^{[2]
X
Expert Source

David Royce & Michael Boyd
Glassblowing Experts & Founders of Bicycle Glass

Expert Interview}
The string should catch quickly.^{[3]
X
Research source} Always have your bucket of water right there on hand to prevent any mistakes or accidents.
Use both hands to turn the bottle as if it were a piece of corn. Keep spinning until the acetone stops burning, which is usually when it starts to smoke.
The abrupt change in temperature should sheer the bottle right where the flame was. Take a piece of sandpaper and smooth out the edges to prevent any possible shards or rough spots.^{[4]
X
Research source}

Method 2

Method 2 of 2:

Scoring and Slicing

Download Article

These are small machines that are made to evenly slice rounded pieces of glass. You likely won't need one for much else than this, but bottle cutters are helpful, cheap tools if you're doing this a lot. Otherwise, a glass cutting knife or sharp, precision blade will do just fine.^{[5]
X
Research source}
Place it wherever you wish to make the cut, ensuring that it is sitting evenly. This clamp will provide your guidance line when scoring the bottle, like using a ruler to draw a straight line. You could also use a roll of masking tape with the bottle shoved in the center to provide a nice, straight line.
3
Using a sharp, precision knife, score the bottle by following your tracing line. Follow the line of the clamp to unsure an even cut. Work slowly and methodically.^{[6]
X
Research source}
- You may have to trace out this line 3-4 times to get a nice, deep score. Note that you aren't trying to cut through the bottle, just create a nice, even line.
4
Heat the line you scored over a candle. Rotate the bottle so that the whole line gets nice and hot. Heat changes cause glass to weaken, and your already scored mark around the bottle will help speed up the process and ensure and even break.^{[7]
X
Research source}
- Heat the scored line for about 5-6 seconds.
EXPERT TIP

Douglass Brown
Glassblowing Expert
Douglass Brown is a Glassblowing Expert based in Half Moon Bay, California. He has over 25 years of experience as a glass artist, and is the owner and operator of 2 glass blowing studios in the San Francisco Bay Area, Half Moon Bay Art Glass and Mare Island Art Glass. Douglass believes in sharing hot glass experiences with anyone who wants to learn about the processes of blowing and sculpting glass. When not teaching, Douglass creates glass art that is a mix of his takes on nature and functional glassware. He has also created the Glass Troubadours, which is a mobile glass blowing studio that hosts parties, events, and visits craft shows.

Douglass Brown
Glassblowing Expert

Use the hot popping technique to cut wine bottles that are too thick. To do this, you can score the bottle all the way around and use a small butane torch to heat the edge while turning it. Place the bottle on a record player or Lazy Susan to keep it spinning.
You will hear a slow breaking sound as you do. Carefully pull apart the two bottle pieces.^{[8]
X
Research source}
By the second or third application, the bottle will slide away and you'll be left with two distinct pieces.
While this method creates a relatively clean break, you can never be too careful. Sand down the rim to get rid of any jagged or rough edges.^{[9]
X
Research source}

Expert Q&A

Search

Add New Question

Question

How do I prepare the bottles if I want to paint on them?

David Royce & Michael Boyd
Glassblowing Experts & Founders of Bicycle Glass
David Royce and Michael Boyd are two professional glass experts who founded Bicycle Glass Co. in 2016. Bicycle Glass is primarily a lighting company, committed to quality, sustainability, and affordability. All Bicycle Glass products are made of high-quality, recycled glass and are hand-blown by a dedicated team of artisans. The studio is committed to reducing its carbon footprint by conserving energy in all of its production. Using renewable wind energy to offset all electricity usage, the studio is actively working toward the goal of carbon neutrality. David Royce and Michael Boyd believe that high-quality, handmade glass products should be within reach for everyone.

David Royce & Michael Boyd

Glassblowing Experts & Founders of Bicycle Glass

Expert Answer

To paint glass bottles, begin by cleaning the surface thoroughly using soap and water. This step is crucial to remove any oil, dirt, or dust that might hinder the adhesion of paint to the glass.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 7 Helpful 1
Question

What if I want to cut the bottle at an angle?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

If you’re using the string method, wrap the string diagonally around the bottle at the desired angle, so one side is higher than the other. For the scoring method, you can also use a string or wire to create your tracing line instead of using a hose clamp to guide your scoring tool.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 26 Helpful 29
Question

How do you make a drinking glass out of a wine bottle?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Cut the top off the bottle at the desired height using your preferred method, then sand down the edges. The bottom of the bottle will form the base of your glass!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 33 Helpful 33

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Always wear gloves and goggles when cutting glass.

Thanks
Helpful 40 Not Helpful 25
Be careful not to rush this you; if you cut too quickly, you might end up breaking the glass and getting cut.

Thanks
Helpful 21 Not Helpful 32