| Microstructural stability of modified 9Cr-1Mo steel during long term exposures at elevated temperatures VT Paul, S Saroja, M Vijayalakshmi J. Nuc. Mater. 378, 273–281, 2008 | 210 | 2008 |
| Studies on hydrogen permeability of 2.25%Cr-1%Mo ferritic steel: correlation with microstructure N Parvathavarthini, S Saroja, RK Dayal, HS Khatak J.Nucl. Mater. 288, 187, 2001 | 119 | 2001 |
| Development of India-specific RAFM steel through optimization of tungsten and tantalum contents for better combination of impact, tensile, low cycle fatigue and creep properties K Laha, S Saroja, A Moitra, R Sandhya, MD Mathew, T Jayakumar, ... J. Nucl. Mater. 439, 41–50, 2013 | 117 | 2013 |
| Correlation of microstructure with mechanical properties of TIG weldments of Ti-6Al-4V made with and without current pulsing NK Babu, SG Sundararaman, R Mythili, S Saroja Mater.Character. 58 (7), 581-587, 2007 | 109 | 2007 |
| Development and characterization of advanced 9Cr ferritic / martensitic steels for fission and fusion reactors S Saroja, A Dasgupta, R Divakar, S Raju, E Mohandas, M Vijayalakshmi, ... J. Nucl. Mater. 409 (2), 131-139, 2011 | 103 | 2011 |
| Prediction of Microstructural States in Cr-Mo steels using Phase Evolution diagrams S Saroja, P Parameswaran, M Vijayalakshmi, VS Raghunathan Acta Metall.Mater. 43 (8), 2985-3000, 1995 | 95 | 1995 |
| Influence of microstructure on the hydrogen permeability of 9Cr-1Mo ferritic steel N Parvathavarthini, S Saroja, RK Dayal J.Nuc.Mater. 264, 35, 1999 | 94 | 1999 |
| Grain refinement to improve impact toughness in 9Cr-1Mo steel through a double austenitisation treatment T Karthikeyan, VT Paul, S Saroja, A Moitra, G Sasikala, M Vijayalakshmi J. Nucl. Mater. 419, 256–262, 2011 | 91 | 2011 |
| Microstructure and microchemistry of hard zone in dissimilar weldments of Cr-Mo steels C Sudha, VT Paul, ALE Terrance, S Saroja, M Vijayalakshmi Weld. J 85 (4), 71s-80s, 2006 | 91 | 2006 |
| Explosive cladding and post-weld heat treatment of mild steel and titanium TN Prasanthi, R C Sudha, S Saroja Materials & Design 93, 180-193, 2016 | 87 | 2016 |
| Variant Selection Mechanism in Ti-5Ta-1.8Nb Alloy T Karthikeyan, A Dasgupta, R Khatirkar, S Saroja, I Samajdar, ... Mater. Sci. Engg. A 528 (2), 549-558, 2010 | 82* | 2010 |
| Effect of Heat Treatment on the Corrosion Behavior of Ti-5Ta-1.8Nb alloy in Boiling Concentrated Nitric Acid AR Shankar, RK Dayal, R Balasubramaniam, VR Raju, R Mythili, S Saroja, ... J. Nucl. Mater. 372 (2-3), 277-284, 2008 | 81 | 2008 |
| Measurement of Transformation Temperatures and Specific Heat Capacity of Tungsten Added Reduced Activation Ferritic - Martensitic Steel (RAFM) S Raju, BJ Ganesh, AK Rai, R Mythili, S Saroja, E Mohandas, ... J. Nuc. Mater. 389, 385-393, 2009 | 77 | 2009 |
| Creep Deformation and Rupture Behaviour of 9Cr-1W-0.2V-0.06Ta Reduced Activation Ferritic Martensitic Steel J Vanaja, K Laha, R Mythili, KS Chandravathi, S Saroja, MD Mathew Mater. Sci. Engg. A 533, 17-25, 2012 | 76 | 2012 |
| Creep rupture behavior of forged thick section 9Cr-1Mo ferritic steel BK Choudhary, S Saroja, KBS Rao, SL Mannan Metall. Mater.Trans.A 30 (11), 2825, 1999 | 72 | 1999 |
| Study of transformation behavior in a Ti-4.4Ta-1.9Nb alloy R Mythili, VT Paul, S Saroja, M Vijayalakshmi, VS Raghunathan Mater. Sci Engg. A 390, 299 - 312, 2005 | 65 | 2005 |
| Thermophysical properties of Ni based super alloy 617 AK Rai, H Trpathy, RN Hajra, S Raju, S Saroja Journal of Alloys and Compounds 698, 442-450, 2017 | 60 | 2017 |
| Misorientation Angle-Axis set between variants during phase transformation between HCP and BCC obeying Burgers Orientation Relation T Karthikeyan, S Saroja, M Vijayalakshmi Scripta Materialia 55, 771, 2006 | 58* | 2006 |
| Estimation of martensite feature size in a low-carbon alloy steel by microtexture analysis of boundaries T Karthikeyan, MK Dash, S Saroja, M Vijayalakshmi Micron 68, 77-90, 2015 | 55 | 2015 |
| Microstructural modification due to reheating in multipass manual metal arc welds of 9Cr–1Mo steel R Mythili, VT Paul, S Saroja, M Vijayalakshmi, VS Raghunathan Journal of nuclear materials 312 (2-3), 199-206, 2003 | 54 | 2003 |
Arup DasguptaProfessor, Homi Bhabha National Institute and Head, Physical Metallurgy Division, IGCAR. FIIM, FEMSIVerified email at igcar.gov.in
