电子电气产品以及焊接接头/焊接试样

电子电气产品

GB/T 26125-2011 Electrical and electronic products. Determinationof six regulated substances(lead, mercury, cadmium, hexavalentchromium, polybrominated biphenyls, polybrominated diphenol ethers)电子电气产品.六种限用物质（铅、汞、镉、六价铬、多溴联苯和多溴二苯醚）的测定

GB/T 29784.2-2013 Determination of polycyclic aromatic hydrocarbonsin electrical and electronic products. Part 2:Gas chromatographicmethod with mass spectrometric detection电子电气产品中多环芳烃的测定 第2部分:气相色谱-质谱法

GB/T 39560.301-2020 Determination of certain substances inelectrical and electronic products—Part 3-1: Screening lead,mercury, cadmium, total chromium and total bromine by X-rayfluorescence spectrometry电子电气产品中某些物质的测定第3-1部分:X射线荧光光谱法筛选铅、汞、镉、总铬和总溴

GB/T 39560.4-2021 Determination of certain substances in electricaland electronic products—Part 4: Mercury in polymers, metals andelectronics by CV-AAS, CV-AFS , ICP-OES and ICP-MS电子电气产品中某些物质的测定第4部分:CV-AAS、CV-AFS、ICP-OES和ICP-MS测定聚合物、金属和电子件中的汞

GB/T 39560.5-2021 Determination of certain substances in electricaland electronic products—Part 5: Cadmium，lead and chromium inpolymers and electronics and cadmium and lead in metals byAAS，AFS，ICP-OES and ICP-MS电子电气产品中某些物质的测定 第5部分:AAS、AFS、ICP-OES和ICP-MS法测定聚合物和电子件中镉、铅、铬以及金属中镉、铅的含量

GB/T 39560.6-2020 Determination of certain substances in electricaland electronic products—Part 6: Polybrominated biphenyls andpolybrominated diphenyl ethers in polymers by gaschromatography-mass spectrometry（GC-MS）电子电气产品中某些物质的测定第6部分:气相色谱-质谱仪（GC-MS）测定聚合物中的多溴联苯和多溴二苯醚

GB/T 39560.701-2020 Determination of certain substances inelectrical and electronic products—Part 7-1:Hexavalentchromium—Presence of hexavalent chromium [Cr(VI)] in colorless andcolored corrosion-protected coatings on metals by the colorimetricmethod电子电气产品中某些物质的测定 第7-1部分:六价铬 比色法测定金属上无色和有色防腐镀层中的六价铬Cr(VI)

GB/T 39560.702-2021 Determination of certain substances inelectrical and electronic products—Part 7-2:Hexavalentchrome—Determination of hexavalent chrome[Cr(VI)]in polymers andelectronics by the color metric method电子电气产品中某些物质的测定 第7-2部分:六价铬比色法测定聚合物和电子件中的六价铬Cr（VI）

GB/T 39560.8-2021 Determination of certain substances in electricaland electronic products—Part 8: Phthalates in polymers by gaschromatography-mass spectrometry (GC-MS), gas chromatography-massspectrometry using a pyrolizer/thermal desorption accessory(Py/TD-GC-MS) 电子电气产品中某些物质的测定第8部分:气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法（Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯

AfPS GS 2014:01 PAK

AfPS GS 2019:01 PAK

IEC 62321-10:2020 Determination of certain substances inelectrotechnical products - Part 10: Polycyclic aromatichydrocarbons (PAHs) in polymers and electronics by gaschromatography-mass spectrometry (GC-MS) 电工产品中某些物质的测定 - 第10部分:气相色谱- 质谱（GC-MS）在聚合物和电子学中的多环芳烃（PAHs）

IEC 62321-3-1:2013 Determination of certain substances inelectrotechnical products - Part 3-1: Screening test methods -Screening of electrotechnical products for lead, mercury, cadmium,total chromium and total bromine using X-ray fluorescencespectrometry电工制品中特定物质的测定. 第3-1部分: 筛选试验方法. 使用X射线荧光光谱法筛选电工制品中的铅, 汞,镉, 总铬和总溴量

IEC 62321-4:2013/AMD 1:2017 Determination of certain substances inelectrotechnical products - Part 4: Mercury in polymers, metals andelectronics by CV-AAS, CV-AFS, ICP-OES andICP-MS电工产品中某些物质的测定第4部分:用CV-AAS、CV-AFS、ICP-OES和ICP-MS测定聚合物、金属和电子产品中的汞

IEC 62321-5:2013 Determination of certain substances inelectrotechnical products - Part 5: Determination of cadmium, lead,and chromium in polymers and electronics and cadmium and lead inmetals by AAS, AFS, ICP- OES andICP-MS电工制品中特定物质的测定.第5部分:通过原子吸收分光光度法(AAS)、原子荧光光谱法(AFS)、电感耦合等离子体发射光谱(ICP-OES)和电感耦合等离子体质谱(ICP-MS)测定聚合物和电子中镉、铅和铬及金属中镉和铅

IEC 62321-6:2015 Determination of certain substances inelectrotechnical products - Part 6: Polybrominated biphenyls andpolybrominated diphenyl ethers in polymers by gaschromatography-mass spectrometry (GC-MS) 电工技术产品中特定物质的测定. 第6部分:采用气相色谱-质谱分析法 (GC-MS) 测定聚合物中的多溴联苯和多溴联苯醚

IEC 62321-7-1:2015 Determination of certain substances inelectrotechnical products - Part 7-1: Determination of the presenceof hexavalent chromium (Cr(VI)) in colorless and coloredcorrosion-protected coatings on metals by the colorimetricmethod电工技术产品中某些物质的测定.第7-1部分:六价铬.使用比色法确定金属无色和有色防腐蚀涂层中是否存在六价铬(Cr(VI))

IEC 62321-7-2:2017 Determination of certain substances inelectrotechnical products - Part 7-2: Hexavalent chromium -Determination of hexavalent chromium (Cr(VI)) in polymers andelectronics by the colorimetric method电工技术产品中某些物质的测定. 第7-2部分: 六价铬.采用比色法测定电子聚合物中的六价铬(Cr(VI))

IEC 62321-8:2017 Determination of certain substances inelectrotechnical products - Part 8: Phthalates in polymers by gaschromatography-mass spectrometry (GC-MS), gas chromatography-massspectrometry using a pyrolizer/thermal desorption accessory(Py/TD-GC-MS) 电工技术产品中某些物质的测定. 第8部分: 采用气相色谱质谱联用仪(GC-MS),配有热裂解/热脱附附件的气相色谱质谱联用仪(Py/TD-GC-MS)测定聚合物中的邻苯二甲酸酯

焊接接头和焊接试样

ANSI/AWS A4.3-93(R2006) 测定马氏体、贝氏体和铁素体钢电弧焊接金属中可扩散氢含量的标准方法

AS 2205.2.2-2003(R2018) Methods for destructive testing of welds inmetal - All-weld-metal tensile test金属焊缝的破坏性试验方法.全焊缝金属拉伸试验

AS 2205.2.3-2003(R2018) Methods for destructive testing of welds inmetal - Transverse joggle-butt tensiletest金属焊缝的破坏性试验方法.横向搭接对接拉伸试验

AS 2205.3.3-2003(R2018) Methods for destructive testing of welds inmetal - Longitudinal guided bend test金属焊缝的破坏性试验方法纵向导向弯曲试验

AS 2205.6.1-2003(R2018) Methods for destructive testing of welds inmetal - Weld joint hardness test金属焊缝的破坏性试验方法.焊缝硬度试验

AS 2205.7.1-2003(R2018) Methods for destructive testing of welds inmetal - Charpy V-notch impact fracture toughnesstest金属焊缝的破坏性试验方法夏比V型缺口冲击断裂韧性试验

AS/NZS 2205.3.1:2020 Methods for destructive testing of welds inmetal - Transverse guided bend test金属焊缝的破坏性试验方法.横向导向弯曲试验

AS/NZS 2205.4.1:2019 Methods for destructive testing of welds inmetal - Nick-break test金属焊缝的破坏性试验方法.缺口断裂试验

AS/NZS 2205.5.1-2019 Methods for destructive testing of welds inmetal - Macro metallographic test for cross-sectionexamination金属焊缝的破坏性试验方法横截面检验用宏观金相试验

ASME BPVC.IX-2021 Standard for Welding, Brazing, andFusing Procedures; Welders; Brazers; and Welding, Brazing, andFusing Operators焊接、钎焊和熔合工艺评定标准；焊工；钎焊；以及焊接、钎焊和熔合操作员

ASTM E190-14 Standard Test Method for Guided Bend Test forDuctility of Welds焊缝韧性的定向弯曲试验的标准试验方法

AWS D1.1/D1.1M: 2020 Structural Welding Code - Steel结构焊接规范

CB/T 3380-2013 Etch test for macrostructure and imperfections ofwelding joint for hull steel船用钢材焊接接头宏观组织及缺欠酸蚀试验方法

CB/T 3692-2016 角焊缝折断试验方法

GB/T 1954-2008 Methods of measurement for ferrite content inaustenitic Cr-Ni stainless steel weld metals铬镍奥氏体不锈钢焊缝铁素体含量测量方法

GB/T 2651-2008 Tensile test method on welded joints焊接接头拉伸试验方法

GB/T 2652-2022 Destructive tests on welds in metallicmaterials—Longitudinal tensile test on weld metal in fusion weldedjoints金属材料焊缝破坏性试验 熔化焊接头焊缝金属纵向拉伸试验

GB/T 2653-2008 Bend test methods on welded joints焊接接头弯曲试验方法

GB/T 2654-2008 Hardness test methods on welded joints焊接接头硬度试验方法

GB/T 26955-2011 Destructive tests on welds in metallic materials.Macroscopic and microscopic examination ofwelds金属材料焊缝破坏性试验.焊缝宏观和微观检验

GB/T 27551-2011 Destructive tests on welds in metallic materials.Fracture test金属材料焊缝破坏性试验.断裂试验

GB/T 27552-2021 Destructive tests on welds in metallicmaterials—Microhardness testing of welded joints金属材料焊缝破坏性试验焊接接头显微硬度试验

GB/T 3965-2012 Determination of diffusible hydrogen in depositedmetal熔敷金属中扩散氢测定方法

ISO 15614-1:2017/AMD 1:2019 Specification and ofwelding procedures for metallic materials — Welding procedure test— Part 1: Arc and gas welding of steels and arc welding of nickeland nickel alloys — Amendment1金属材料焊接工艺的规范和评定.焊接工艺试验.第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊.修改件1

ISO 15614-2:2005/Cor 2:2009 Specification and ofwelding procedures for metallic materials - Welding procedure test- Part 2: Arc welding of aluminium and its alloys; Amendment2金属材料焊接程序的规范和鉴定.焊接程序试验.第2部分:铝及其合金的电弧焊接.修改件2

ISO 17639:2022 Destructive tests on welds in metallic materials —Macroscopic and microscopic examination ofwelds金属材料焊缝的破坏性试验.焊缝的宏观和微观检验

ISO 3690:2018 Welding and allied processes - Determination ofhydrogen content in arc weld metal焊接 碳钢和低合金钢手工焊熔敷金属扩散氢的测定

ISO 4136:2022 Destructive tests on welds in metallic materials —Transverse tensile test钢的对接焊.横向抗拉伸强度

ISO 5173:2009/AMD 1:2011 Destructive tests on welds in metallicmaterials - Bend tests; Amendment 1金属材料焊缝破坏性试验.弯曲试验.修改件1

ISO 5178:2019 Destructive tests on welds in metallic materials —Longitudinal tensile test on weld metal in fusion weldedjoints金属材料焊缝破坏性试验 - 焊接金属焊接纵向拉伸试验

ISO 9015-1:2001 Destructive tests on welds in metallic materials -Hardness testing - Part 1: Hardness test on arc weldedjoints金属材料焊接的破坏性试验 硬度试验 第1部分:弧焊接头的硬度试验

ISO 9015-2:2016 Destructive tests on welds in metallic materials -Hardness testing - Part 2: Microhardness testing of weldedjoints金属材料焊接的破坏性试验.硬度试验.第2部分:焊接点的显微硬度测试

Destructive tests on welds in metallic materials - Impact tests -Test specimen location, notch orientation andexamination金属材料焊接的破坏性试验.冲击测试.试样定位,切口定向和检查

ISO 9017:2017 Destructive tests on welds in metallic materials -Fracture test金属材料焊接的破坏性试验.断裂试验

JIS Z 3136-1999 Specimen dimensions and procedure for shear testingresistance spot and embossed projection weldedjoints剪切试验电阻点焊和压印凸焊焊接点的样品尺寸和程序

NB/T 47014-2011 Welding procedure for pressuree承压设备焊接工艺评定

NB/T 47016-2011 Mechanical property tests of product welded testcoupons for pressure e承压设备产品焊接试件的力学性能检验

赛德斯威(Satisfy) 将提供电子电气产品以及焊接接头/焊接试样的物性测试的一站式服务，包括前期的评估、相关资料准备和提交、测试的全程跟进以及报告解读、数据分析和整改建议。