Lasers have been used to create natural adhesives for paper

Creative Machines Lab at Columbia Engineering have developed a system of software-controlled lasers to cook food with precision, retain moisture with the final-cooked product, brown food within its original packaging, and create an entirely new meal creation process for a consumer. Watch this three-minute video to see for yourself.

Rather than creating a narrow beam of light via amplification in an optical cavity, the random laser produces a red glow by scattering photons created in the natural pores of a peanut kernel after it has been injected with a solution of light-generating carbon dots derived from birch leaves.

In 2022, scientists used lasers to create a powerful implosion that bound hydrogen isotopes together, releasing more energy than was input into the system. Research is ongoing to achieve this self-sustaining reaction with larger yields and energy gains.

Such projects would allow most debris to burn up and no longer pose a risk to active satellites, telescopes, and astronauts on space stations. Enacting these plans would require substantial investments from private and governmental space agencies and overcoming international laws that prevent the removal of another country's space equipment.

Archaeological teams now have another item to pack with their trowels: Lasers. Researchers' approach to unsurveyed land has been transformed by light detection and ranging technology. LiDAR has helped archaeologists break new ground and uncover...

A NASA study found that lasers from ground- and space-based systems could utilize the momentum of light to safely push smaller debris out of their orbits. These systems would need to be accompanied by amendments to international space law, which prevents any nation from touching debris from another country, among other strategies.

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

A proof of concept for a laser protection system, which could be used to protect launchpads and airports in the future, was conducted on the Säntis mountain in northeastern Switzerland. Rapid laser pulses heated air molecules, creating a more conductive, 50-meter (164-foot) path for the electrical discharge to travel through.

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

After a University of Michigan engineering student suffered retinal burns from an ultrashort pulse laser, researchers realized it could be used to reshape the cornea and improve a person's vision with greater precision than a scalpel and earlier laser technologies. Agencies, including the National Science Foundation, the National Institutes of Health, and the Department of Energy, provided funding to develop and commercialize the procedure.

These systems link a molecular light absorber to a catalyst that can synthesize fuels—such as ethanol—and ethylene, a precursor to plastics, in a carbon-neutral manner. Because these byproducts have greater energy concentrations than the carbohydrates produced by photosynthetic organisms, research is ongoing to engineer the necessary catalysts.

Researchers have demonstrated a proof-of-concept version of a chip-based 3D printer that emits visible light onto light-sensitive resin to construct solid shapes. The technology may provide a portable, low-cost solution for future, small-scale fabrication needs.

When sending a print job, the file data generates an image that a laser maps positively charged regions onto a drum separately for each color toner. Once the negatively charged toner is applied where it was electrically attracted, heat and pressure fuse it onto the paper.

These devices use diodes and mirrors to create pulses of light that vaporize metal in billionths of a second, though at wavelengths that cannot react with organic material. Pulse width, power, and speed adjustments can produce white, black, and even colored patterns through controlled heat reactions.

Rather than directly energizing neon atoms, electrical discharge at lower, more practical power levels can excite helium atoms to energy levels nearly equal to those in neon atoms. Within a helium-neon laser, these gases are present in a 10-to-1 ratio, enabling helium to efficiently transfer energy to neon, which is then discharged as red light.

Skin resurfacing vaporizes the top layer of skin to reveal healthier, new skin, while collagen can give the skin structure and elasticity. Such procedures treat scars and burns, but may leave light spots on the skin.

The way we normally recycle plastics is a downward spiral of waste and degraded materials, but there is another option—turning plastic back into the oil it was made from.

Sand from specialized mines is thoroughly cleaned and melted at more than 1,600 degrees Celsius before being poured onto liquid tin and evenly spread out to form glass sheets. Some factories are designed to reprocess 100% of glass scraps created when cutting glass with diamond-tipped blades or lasers.

The agency awarded a contract for the development of devices that can create edible structures from long-lasting dry powders when mixed with liquids or pastes. By delaying this integration until the time of consumption, food could last longer than the current six-month expiration of freeze-dried meals for Mars expeditions.

One University of Colorado professor has developed an ink that can be "turned on" with exposure to UV light, and "turned off" with sunlight. While the ink could help those who want to hide their body art from family members or coworkers, there are potential uses for medical procedures.

French start-up Glowee is experimenting with lights made from bioluminescent microorganisms in public spaces to reduce energy use. While the technology shows promise, challenges remain with brightness, maintenance, and scaling it for widespread use.

From polymers to nurdles, learn how plastic is created and what we can do to slow the lasting repercussions this material will have on both our planet and our lives.

Semiconductors, crucial in electronics, operate based on quantum superposition. Lasers use stimulated emission, a quantum process, and MRI machines leverage the quantum spin of hydrogen atoms for imaging. Atomic clocks measure time with unprecedented precision using quantum transitions.

More than 28 million tons of plastic enters the environment each year, where it harms animals and damages habitats. A study co-authored by researchers at The Pew Charitable Trusts found that this flow can be reduced by nearly 80% in the next 20 years using existing waste management and recycling technology.

Light needs to be absorbed by ink particles to break them down into small enough pieces for the immune system to eliminate. Color ink reflects, rather than absorbs, lasers of the same color, while black ink absorbs all colored lasers.

Microbubbles of nonreactive gas can be administered to improve the reflection of sound waves and the resulting imaging during an ultrasound. Bouncing light waves within a bubble can stimulate emission of light from a trapped chemical, just as occurs within a laser, and bubbles can act as valves that control the flow and reaction rates in microfluidic systems.

Inspired by how fine hairs stand on the skin with goose bumps, researchers have recently created artificial skin that raises artificial goose bumps when exposed to a laser. This type of precise, localized, and controllable system could potentially fuel later development of programmable machines that could be used for information storage.

The pits are dips in the LaserDisc, CD, DVD, or Blu-ray surface that do not reflect the laser from the optical drive back to the photoelectric cell, resulting in a coded zero. Lands are reflective plateaus on the surface that code for a one.

Carbon conversion focuses on a central perplexing question: if carbon dioxide is a leading driver of climate change, and fossil fuels are made of carbon-based molecules, can we devise a way to convert CO₂ into useful alternatives efficiently? This video breaks down a potential pathway using artificial photosynthesis, which uses sunlight to convert CO₂ into fuel.

In 2026, scientists in Slovenia developed a method to 3D print a small elephant, several microscopic geometric objects, and barcodes for cell labeling within living human cells, which continued to grow and divide thereafter. The experiment opens the door to fabricating devices within cells to study and manipulate cellular functions.

An increasing number of Americans, including high-profile celebrities, get tattoos removed because laser removal has become more advanced and cost-effective. The tattoo industry is adjusting to this mainstream trend.

Although 3D printing has become synonymous with the term, objects can be fabricated without filaments of hot plastic or light-sensitive powders. For example, during sheet lamination, ultrasonic waves—high-frequency vibrations—can join metal sheets by creating molecular bonds through friction.

The red light originates from a long-lasting excited electron state in the element's atomic structure. The brittle gray metal has historically been used in pigment production, the manufacturing of rust-resistant stainless steel, and the creation of durable coatings with long-lasting shine for metals, wood, and leather.

Shortly after its discovery in 2004, the strength, flexibility, optical properties, and conductivity of this thin layer of carbon atoms earned it the designation of a "wonder material," but breakthroughs in its use have taken decades of research. As of 2026, graphene-enhanced electronic sensors, optical microchips, concrete, and supercapacitors are available, though scale production challenges remain.

Gravity can cause gaps, such as those in the chambers of a 3D-printed heart, to collapse before stem cells, hydrogels, and biochemicals bind together during the bioprinting process. Rather than Earth's surface, some bioprinting is done on the International Space Station, where defective organs are also printed to test treatment methods.

Developed by researchers at Hebrew University, the method involves the firefly enzyme luciferase, which emits light from within bacteria expressing when they are in the presence of acetic acid vapors produced by wine. The process provides affordable, on-site, real-time monitoring of fermentation quality.

The strong carbon bonds in diamonds efficiently carry vibrations, allowing them to conduct heat several times faster than copper, a metal commonly used in heat sinks. AI and high-performance computing have pushed researchers to investigate alternative materials for cooling solutions.

Recognizing that RuBisCO—a protein that binds carbon dioxide to other compounds to produce the building blocks of organic molecules—often mistakenly binds oxygen, scientists performed directed evolution experiments to modify the geometry of a bacterial version of the protein to cause it to preferentially interact with carbon dioxide over oxygen.