mini.nvim/lua/mini/bracketed.lua at main · latteyt/mini.nvim

Repository navigation

10BC8

--- *mini.bracketed* Go forward/backward with square brackets

--- *MiniBracketed*

---

--- ==============================================================================

---

--- Features:

--- - Configurable Lua functions to go forward/backward to a certain target.

--- Each function can be customized with:

--- - Direction. One of "forward", "backward", "first" (forward starting

--- from first one), "last" (backward starting from last one).

--- - Number of times to go.

--- - Whether to wrap on edges (going forward on last one goes to first).

--- - Some other target specific options.

---

--- - Mappings using square brackets. They are created using configurable

--- target suffix and can be selectively disabled.

---

--- Each mapping supports |[count]|. Mappings are created in Normal mode; for

--- targets which move cursor in current buffer also Visual and

--- Operator-pending (with dot-repeat) modes are supported.

---

--- Using `lower-suffix` and `upper-suffix` (lower and upper case suffix) for

--- a single target the following mappings are created:

--- - `[` + `upper-suffix` : go first.

--- - `[` + `lower-suffix` : go backward.

--- - `]` + `lower-suffix` : go forward.

--- - `]` + `upper-suffix` : go last.

---

--- - Supported targets (for more information see help for corresponding Lua

--- function):

---

--- `Target` `Mappings` `Lua function`

---

--- Buffer.......................... `[B` `[b` `]b` `]B` .... |MiniBracketed.buffer()|

---

--- Comment block................... `[C` `[c` `]c` `]C` .... |MiniBracketed.comment()|

---

--- Conflict marker................. `[X` `[x` `]x` `]X` .... |MiniBracketed.conflict()|

---

--- Diagnostic...................... `[D` `[d` `]d` `]D` .... |MiniBracketed.diagnostic()|

---

--- File on disk.................... `[F` `[f` `]f` `]F` .... |MiniBracketed.file()|

---

--- Indent change................... `[I` `[i` `]i` `]I` .... |MiniBracketed.indent()|

---

--- Jump from |jumplist|

--- inside current buffer........... `[J` `[j` `]j` `]J` .... |MiniBracketed.jump()|

---

--- Location from |location-list|..... `[L` `[l` `]l` `]L` .... |MiniBracketed.location()|

---

--- Old files....................... `[O` `[o` `]o` `]O` .... |MiniBracketed.oldfile()|

---

--- Quickfix entry from |Quickfix|.... `[Q` `[q` `]q` `]Q` .... |MiniBracketed.quickfix()|

---

--- Tree-sitter node and parents.... `[T` `[t` `]t` `]T` .... |MiniBracketed.treesitter()|

---

--- Undo states from specially

--- tracked linear history.......... `[U` `[u` `]u` `]U` .... |MiniBracketed.undo()|

---

--- Window in current tab........... `[W` `[w` `]w` `]W` .... |MiniBracketed.window()|

---

--- Yank selection replacing

--- latest put region................`[Y` `[y` `]y` `]Y` .... |MiniBracketed.yank()|

---

--- Notes:

--- - The `undo` target remaps |u| and |<C-R>| keys to register undo state

--- after undo and redo respectively. If this conflicts with your setup,

--- either disable `undo` target or make your remaps after calling

--- |MiniBracketed.setup()|. To use `undo` target, remap your undo/redo keys

--- to call |MiniBracketed.register_undo_state()| after the action.

---

--- # Setup ~

---

--- This module needs a setup with `require('mini.bracketed').setup({})` (replace

--- `{}` with your `config` table). It will create global Lua table `MiniBracketed`

--- which you can use for scripting or manually (with `:lua MiniBracketed.*`).

---

--- See |MiniBracketed.config| for available config settings.

---

--- You can override runtime config settings (like target options) locally

--- to buffer inside `vim.b.minibracketed_config` which should have same structure

--- as `MiniBracketed.config`. See |mini.nvim-buffer-local-config| for more details.

---

--- # Comparisons ~

---

--- - 'tpope/vim-unimpaired':

--- - Supports buffer, conflict, file, location, and quickfix targets mostly

--- via built-in commands (like |:bprevious|, etc.) without configuration.

--- - Supports files from argument list and tags. This module does not.

--- - Doesn't support most other this module's targets (comment, indent, ...).

--- - 'mini.indentscope':

--- - Target |MiniBracketed.indent()| target can go to "first" and "last"

--- indent change. It also can go not only to line with smaller indent,

--- but also bigger or different one.

--- - Mappings from 'mini.indentscope' have more flexibility in computation of

--- indent scope, like how to treat empty lines near border or whether to

--- compute indent at cursor.

---

--- # Disabling~

---

--- To disable, set `vim.g.minibracketed_disable` (globally) or

--- `vim.b.minibracketed_disable` (for a buffer) to `true`. Considering high

--- number of different scenarios and customization intentions, writing exact

--- rules for disabling module's functionality is left to user. See

--- |mini.nvim-disabling-recipes| for common recipes.

---@diagnostic disable:luadoc-miss-type-name

---@alias __bracketed_direction string One of "first", "backward", "forward", "last".

---@alias __bracketed_add_to_jumplist - <add_to_jumplist> (`boolean`) - Whether to add current position to jumplist.

--- Default: `false`.

---@alias __bracketed_opts table|nil Options. A table with fields:

--- - <n_times> `(number)` - Number of times to advance. Default: |v:count1|.

--- - <wrap> `(boolean)` - Whether to wrap around edges. Default: `true`.

---@diagnostic disable:undefined-field

-- Module definition ==========================================================

local MiniBracketed = {}

local H = {}

--- Module setup

---

---@param config table|nil Module config table. See |MiniBracketed.config|.

---

---@usage `require('mini.bracketed').setup({})` (replace `{}` with your `config` table)

MiniBracketed.setup = function(config)

-- Export module

_G.MiniBracketed = MiniBracketed

-- Setup config

config = H.setup_config(config)

-- Apply config

H.apply_config(config)

-- Define behavior

H.create_autocommands()

end

--stylua: ignore

--- Module config

---

--- Default values:

---@eval return MiniDoc.afterlines_to_code(MiniDoc.current.eval_section)

---@text Options ~

---

--- Each entry configures target with the same name and can have data configuring

--- mapping suffix and target options.

---

--- Example of configuration: >

---

--- require('mini.bracketed').setup({

--- -- Map [N, [n, ]n, ]N for conflict marker like in 'tpope/vim-unimpaired'

--- conflict = { suffix = 'n' },

---

--- -- Make diagnostic advance only by errors

--- diagnostic = { options = { severity = vim.diagnostic.severity.ERROR } },

---

--- -- Disable creation of mappings for `indent` target (for example,

--- -- in favor of ones from |mini.indentscope|)

--- indent = { suffix = '' },

---

--- -- Disable mappings for `window` target in favor of custom ones

--- window = { suffix = '' },

--- })

---

--- -- Create custom `window` mappings

--- local map = vim.keymap.set

--- map('n', '<Leader>wH', "<Cmd>lua MiniBracketed.window('first')<CR>")

--- map('n', '<Leader>wh', "<Cmd>lua MiniBracketed.window('backward')<CR>")

--- map('n', '<Leader>wl', "<Cmd>lua MiniBracketed.window('forward')<CR>")

--- map('n', '<Leader>wL', "<Cmd>lua MiniBracketed.window('last')<CR>")

---

--- ## Suffix ~

---

--- The `suffix` key is used to create target mappings.

---

--- Supply empty string to disable mapping creation for that particular target.

--- To create a completely different mapping (like with |<Leader>|) use target

--- function manually.

---

--- Using `lower-suffix` and `upper-suffix` (lower and upper case suffix) for

--- a single target the following mappings are created:

--- - `[` + `upper-suffix` : go first.

--- - `[` + `lower-suffix` : go backward.

--- - `]` + `lower-suffix` : go forward.

--- - `]` + `upper-suffix` : go last.

---

--- When supplied with a non-letter, only forward/backward mappings are created.

---

--- ## Options ~

---

--- The `options` key is directly forwarded as `opts` to corresponding Lua function.

MiniBracketed.config = {

-- First-level elements are tables describing behavior of a target:

-- - <suffix> - single character suffix. Used after `[` / `]` in mappings.

-- For example, with `b` creates `[B`, `[b`, `]b`, `]B` mappings.

-- Supply empty string `''` to not create mappings.

-- - <options> - table overriding target options.

-- See `:h MiniBracketed.config` for more info.

buffer = { suffix = 'b', options = {} },

comment = { suffix = 'c', options = {} },

conflict = { suffix = 'x', options = {} },

diagnostic = { suffix = 'd', options = {} },

file = { suffix = 'f', options = {} },

indent = { suffix = 'i', options = {} },

jump = { suffix = 'j', options = {} },

location = { suffix = 'l', options = {} },

oldfile = { suffix = 'o', options = {} },

quickfix = { suffix = 'q', options = {} },

treesitter = { suffix = 't', options = {} },

undo = { suffix = 'u', options = {} },

window = { suffix = 'w', options = {} },

yank = { suffix = 'y', options = {} },

}

--minidoc_afterlines_end

--- Listed buffer

---

--- Go to next/previous listed buffer. Order by their number (see |bufnr()|).

---

--- Direction "forward" increases number, "backward" - decreases.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.buffer = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'buffer')

opts =

vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().buffer.options, opts or {})

-- Define iterator that traverses all valid listed buffers

-- (should be same as `:bnext` / `:bprev`)

local buf_list = vim.api.nvim_list_bufs()

local is_listed = function(buf_id) return vim.api.nvim_buf_is_valid(buf_id) and vim.bo[buf_id].buflisted end

local iterator = {}

iterator.next = function(buf_id)

for id = buf_id + 1, buf_list[#buf_list] do

if is_listed(id) then return id end

end

iterator.prev = function(buf_id)

for id = buf_id - 1, buf_list[1], -1 do

if is_listed(id) then return id end

end

iterator.state = vim.api.nvim_get_current_buf()

iterator.start_edge = buf_list[1] - 1

iterator.end_edge = buf_list[#buf_list] + 1

-- Iterate

local res_buf_id = MiniBracketed.advance(iterator, direction, opts)

if res_buf_id == iterator.state then return end

-- Apply

vim.api.nvim_set_current_buf(res_buf_id)

end

--- Comment block

---

--- Go to next/previous comment block. Only linewise comments using

--- 'commentsring' are recognized.

---

--- Direction "forward" increases line number, "backward" - decreases.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

--- __bracketed_add_to_jumplist

--- - <block_side> `(string)` - which side of comment block to use. One of

--- "near" (default; use nearest side), "start" (use first line), "end"

--- (use last line), "both" (use both first and last lines).

MiniBracketed.comment = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'comment')

opts = vim.tbl_deep_extend(

'force',

{ add_to_jumplist = false, block_side = 'near', n_times = vim.v.count1, wrap = true },

H.get_config().comment.options,

opts or {}

)

-- Compute loop data to traverse target commented lines in current buffer

local is_commented = H.make_comment_checker()

if is_commented == nil then return end

local predicate = ({

near = function(_, cur, _, recent) return cur and not recent end,

start = function(above, cur, _, _) return cur and not above end,

['end'] = function(_, cur, below, _) return cur and not below end,

both = function(above, cur, below, _) return cur and not (above and below) end,

})[opts.block_side]

if predicate == nil then return end

-- Define iterator

local iterator = {}

local n_lines = vim.api.nvim_buf_line_count(0)

iterator.next = function(line_num)

local above, cur = is_commented(line_num), is_commented(line_num + 1)

for lnum = line_num + 1, n_lines do

local below = is_commented(lnum + 1)

if predicate(above, cur, below, above) then return lnum end

above, cur = cur, below

end

iterator.prev = function(line_num)

local cur, below = is_commented(line_num - 1), is_commented(line_num)

for lnum = line_num - 1, 1, -1 do

local above = is_commented(lnum - 1)

if predicate(above, cur, below, below) then return lnum end

below, cur = cur, above

end

iterator.state = vim.fn.line('.')

iterator.start_edge = 0

iterator.end_edge = n_lines + 1

-- Iterate

local res_line_num = MiniBracketed.advance(iterator, direction, opts)

local is_outside = res_line_num <= 0 or n_lines < res_line_num

if res_line_num == nil or res_line_num == iterator.state or is_outside then return end

-- Possibly add current position to jumplist

if opts.add_to_jumplist then H.add_to_jumplist() end

-- Apply. Open just enough folds and put cursor on first non-blank.

vim.api.nvim_win_set_cursor(0, { res_line_num, 0 })

vim.cmd('normal! zv^')

end

--- Git conflict marker

---

--- Go to next/previous lines containing Git conflict marker. That is, if it

--- starts with "<<<<<<< ", ">>>>>>> ", or is "=======".

---

--- Direction "forward" increases line number, "backward" - decreases.

---

--- Notes:

--- - Using this target in Operator-pending mode allows the following approach

--- at resolving merge conflicts:

--- - Place cursor on `=======` line.

--- - Execute one of these: `d]x[xdd` (choose upper part) or

--- `d[x]xdd` (choose lower part).

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

--- __bracketed_add_to_jumplist

MiniBracketed.conflict = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'conflict')

opts = vim.tbl_deep_extend(

'force',

{ add_to_jumplist = false, n_times = vim.v.count1, wrap = true },

H.get_config().conflict.options,

opts or {}

)

-- Define iterator that traverses all conflict markers in current buffer

local n_lines = vim.api.nvim_buf_line_count(0)

local iterator = {}

iterator.next = function(line_num)

for lnum = line_num + 1, n_lines do

if H.is_conflict_mark(lnum) then return lnum end

end

iterator.prev = function(line_num)

for lnum = line_num - 1, 1, -1 do

if H.is_conflict_mark(lnum) then return lnum end

end

iterator.state = vim.fn.line('.')

iterator.start_edge = 0

iterator.end_edge = n_lines + 1

-- Iterate

local res_line_num = MiniBracketed.advance(iterator, direction, opts)

local is_outside = res_line_num <= 0 or n_lines < res_line_num

if res_line_num == nil or res_line_num == iterator.state or is_outside then return end

-- Possibly add current position to jumplist

if opts.add_to_jumplist then H.add_to_jumplist() end

-- Apply. Open just enough folds and put cursor on first non-blank.

vim.api.nvim_win_set_cursor(0, { res_line_num, 0 })

vim.cmd('normal! zv^')

end

--- Diagnostic

---

--- Go to next/previous diagnostic. This is mostly similar to

--- |vim.diagnostic.goto_next()| and |vim.diagnostic.goto_prev()| for

--- current buffer which supports |[count]| and functionality to go to

--- first/last diagnostic entry.

---

--- Direction "forward" increases line number, "backward" - decreases.

---

--- Notes:

--- - Using `severity` option, this target can be used in mappings like "go to

--- next/previous error" (), etc. Using code similar to this: >

---

--- local severity_error = vim.diagnostic.severity.ERROR

--- -- Use these inside custom mappings

--- MiniBracketed.diagnostic('forward', { severity = severity_error })

--- MiniBracketed.diagnostic('backward', { severity = severity_error })

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

--- - <float> `(boolean|table)` - control floating window after movement.

--- For available values see |vim.diagnostic.goto_next()|.

--- - <severity> `(string|table)` - which severity to use.

--- For available values see |diagnostic-severity|.

MiniBracketed.diagnostic = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'diagnostic')

opts = vim.tbl_deep_extend(

'force',

{ float = nil, n_times = vim.v.count1, severity = nil, wrap = true },

H.get_config().diagnostic.options,

opts or {}

)

-- Define iterator that traverses all diagnostic entries in current buffer

local is_position = function(x) return type(x) == 'table' and #x == 2 end

local diag_pos_to_cursor_pos = function(pos) return { pos[1] + 1, pos[2] } end

local iterator = {}

iterator.next = function(position)

local goto_opts = { cursor_position = diag_pos_to_cursor_pos(position), severity = opts.severity, wrap = false }

local new_pos = vim.diagnostic.get_next_pos(goto_opts)

if not is_position(new_pos) then return end

return new_pos

end

iterator.prev = function(position)

local goto_opts = { cursor_position = diag_pos_to_cursor_pos(position), severity = opts.severity, wrap = false }

local new_pos = vim.diagnostic.get_prev_pos(goto_opts)

if not is_position(new_pos) then return end

return new_pos

end

-- - Define states with zero-based indexing as used in `vim.diagnostic`.

-- - Go outside of proper buffer position for `start_edge` and `end_edge` to

-- correctly spot diagnostic entry right and start and end of buffer.

local cursor_pos = vim.api.nvim_win_get_cursor(0)

iterator.state = { cursor_pos[1] - 1, cursor_pos[2] }

iterator.start_edge = { 0, -1 }

local last_line = vim.api.nvim_buf_line_count(0)

iterator.end_edge = { last_line - 1, vim.fn.col({ last_line, '$' }) - 1 }

-- Iterate

local res_pos = MiniBracketed.advance(iterator, direction, opts)

if res_pos == nil or res_pos == iterator.state then return end

-- Apply. Use `goto_next()` with offsetted cursor position to make it respect

-- `vim.diagnostic.config()`.

vim.diagnostic.goto_next({

cursor_position = { res_pos[1] + 1, res_pos[2] - 1 },

float = opts.float,

severity = opts.severity,

})

end

--- File on disk

---

--- Go to next/previous file on disk alphabetically. Files are taken from

--- directory of file in current buffer (or current working directory if buffer

--- doesn't contain a readable file). Only first-level files are used, i.e. it

--- doesn't go inside subdirectories.

---

--- Direction "forward" goes forward alphabetically, "backward" - backward.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.file = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'file')

opts = vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().file.options, opts or {})

-- Get file data

local file_data = H.get_file_data()

if file_data == nil then return end

local file_basenames, directory = file_data.file_basenames, file_data.directory

-- Define iterator that traverses all found files

local iterator = {}

local n_files = #file_basenames

iterator.next = function(ind)

-- Allow advance in untrackable current buffer

if ind == nil then return 1 end

if n_files <= ind then return end

return ind + 1

end

iterator.prev = function(ind)

-- Allow advance in untrackable current buffer

if ind == nil then return n_files end

if ind <= 1 then return end

return ind - 1

end

-- - Find filename array index of current buffer

local cur_basename = vim.fn.fnamemodify(vim.api.nvim_buf_get_name(0), ':t')

local cur_basename_ind

if cur_basename ~= '' then

for i, f in ipairs(file_basenames) do

if cur_basename == f then

cur_basename_ind = i

break

end

iterator.state = cur_basename_ind

iterator.start_edge = 0

iterator.end_edge = n_files + 1

-- Iterate

local res_ind = MiniBracketed.advance(iterator, direction, opts)

if res_ind == iterator.state then return end

-- Apply. Open target_path.

local path_sep = package.config:sub(1, 1)

local target_path = directory .. path_sep .. file_basenames[res_in 10BC8 d]

vim.cmd('edit ' .. target_path)

end

--- Indent change

---

--- Go to next/previous line with different indent (see |indent()|).

--- Can be used to go to lines with smaller, bigger, or different indent.

---

--- Notes:

--- - Directions "first" and "last" work differently from most other targets

--- for performance reasons. They are essentially "backward" and "forward"

--- with very big `n_times` option.

--- - For similar reasons, `wrap` is not supported.

--- - Blank line inherit indent from near non-blank line in direction of movement.

---

--- Direction "forward" increases line number, "backward" - decreases.

---

---@param direction __bracketed_direction

---@param opts table|nil Options. A table with fields:

--- - <n_times> `(number)` - Number of times to advance. Default: |v:count1|.

--- __bracketed_add_to_jumplist

--- - <change_type> `(string)` - which type of indent change to use.

--- One of "less" (default; smaller indent), "more" (bigger indent),

--- "diff" (different indent).

MiniBracketed.indent = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'indent')

opts = vim.tbl_deep_extend(

'force',

{ add_to_jumplist = false, change_type = 'less', n_times = vim.v.count1 },

H.get_config().indent.options,

opts or {}

)

opts.wrap = false

if direction == 'first' then

-- For some reason using `n_times = math.huge` leads to infinite loop

direction, opts.n_times = 'backward', vim.api.nvim_buf_line_count(0) + 1

end

if direction == 'last' then

direction, opts.n_times = 'forward', vim.api.nvim_buf_line_count(0) + 1

end

-- Compute loop data to traverse target commented lines in current buffer

local predicate = ({

less = function(new, cur) return new < cur or cur == 0 end,

more = function(new, cur) return new > cur end,

diff = function(new, cur) return new ~= cur end,

})[opts.change_type]

if predicate == nil then return end

-- Define iterator

local iterator = {}

iterator.next = function(cur_lnum)

-- Correctly process empty current line

cur_lnum = vim.fn.nextnonblank(cur_lnum)

local cur_indent = vim.fn.indent(cur_lnum)

local new_lnum, new_indent = cur_lnum, cur_indent

-- Check with `new_lnum > 0` because `nextnonblank()` returns -1 if line is

-- outside of line range

while new_lnum > 0 do

new_indent = vim.fn.indent(new_lnum)

if predicate(new_indent, cur_indent) then return new_lnum end

new_lnum = vim.fn.nextnonblank(new_lnum + 1)

end

iterator.prev = function(cur_lnum)

cur_lnum = vim.fn.prevnonblank(cur_lnum)

local cur_indent = vim.fn.indent(cur_lnum)

local new_lnum, new_indent = cur_lnum, cur_indent

while new_lnum > 0 do

new_indent = vim.fn.indent(new_lnum)

if predicate(new_indent, cur_indent) then return new_lnum end

new_lnum = vim.fn.prevnonblank(new_lnum - 1)

end

-- - Don't add first and last states as there is no wrapping around edges

iterator.state = vim.fn.line('.')

-- Iterate

local res_line_num = MiniBracketed.advance(iterator, direction, opts)

if res_line_num == nil or res_line_num == iterator.state then return end

-- Possibly add current position to jumplist

if opts.add_to_jumplist then H.add_to_jumplist() end

-- Apply. Open just enough folds and put cursor on first non-blank.

vim.api.nvim_win_set_cursor(0, { res_line_num, 0 })

vim.cmd('normal! zv^')

end

--- Jump inside current buffer

---

--- Go to next/previous jump from |jumplist| which is inside current buffer.

---

--- Notes:

--- - There are no Visual mode mappings due to implementation problems.

---

--- Direction "forward" increases jump number, "backward" - decreases.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.jump = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'jump')

opts = vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().jump.options, opts or {})

-- Define iterator that traverses all jumplist entries inside current buffer

local cur_buf_id = vim.api.nvim_get_current_buf()

local jump_list, cur_jump_num = unpack(vim.fn.getjumplist())

local n_list = #jump_list

if n_list == 0 then return end

-- - Correct for zero-based indexing

cur_jump_num = cur_jump_num + 1

local iterator = {}

local is_jump_num_from_current_buffer = function(jump_num)

local jump_entry = jump_list[jump_num]

if jump_entry == nil then return end

return jump_entry.bufnr == cur_buf_id

end

iterator.next = function(jump_num)

for num = jump_num + 1, n_list do

if is_jump_num_from_current_buffer(num) then return num end

end

iterator.prev = function(jump_num)

for num = jump_num - 1, 1, -1 do

if is_jump_num_from_current_buffer(num) then return num end

end

iterator.state = cur_jump_num

iterator.start_edge = 0

iterator.end_edge = n_list + 1

-- Iterate

local res_jump_num = MiniBracketed.advance(iterator, direction, opts)

if res_jump_num == nil then return end

-- Apply. Make jump. Allow jumping to current jump entry as it might be

-- different from current cursor position.

H.make_jump(jump_list, cur_jump_num, res_jump_num)

end

--- Location from location list

---

--- Go to next/previous location from |location-list|. This is similar to

--- |:lfirst|, |:lprevious|, |:lnext|, and |:llast| but with support of

--- wrapping around edges and |[count]| for "first"/"last" direction.

---

--- Direction "forward" increases location number, "backward" - decreases.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.location = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'location')

opts =

vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().location.options, opts or {})

H.qf_loc_implementation('location', direction, opts)

end

--- Old files from previous and current sessions

---

--- Go to older/newer readable file either from previous session (see |v:oldfiles|)

--- or the current one (updated automatically after |MiniBracketed.setup()| call).

---

--- Direction "forward" goes to more recent files, "backward" - to older.

---

--- Notes:

--- - In current session it tracks only normal buffers (see |'buftype'|) for

--- some readable file.

--- - No new file is tracked when advancing this target. Only after buffer

--- change is done not through this target (like with |MiniBracketed.buffer()|),

--- it updates recency of last advanced and new buffers.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.oldfile = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'oldfile')

opts =

vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().oldfile.options, opts or {})

-- Define iterator that traverses all old files

local cur_path = vim.api.nvim_buf_get_name(0)

H.oldfile_normalize()

local oldfile_arr = H.oldfile_get_array()

local n_oldfiles = #oldfile_arr

local iterator = {}

iterator.next = function(ind)

-- Allow advance in untrackable current buffer

if ind == nil then return 1 end

if n_oldfiles <= ind then return end

return ind + 1

end

iterator.prev = function(ind)

-- Allow advance in untrackable current buffer

if ind == nil then return n_oldfiles end

if ind <= 1 then return end

return ind - 1

end

iterator.state = H.cache.oldfile.recency[cur_path]

iterator.start_edge = 0

iterator.end_edge = n_oldfiles + 1

-- Iterate

local res_arr_ind = MiniBracketed.advance(iterator, direction, opts)

if res_arr_ind == nil or res_arr_ind == iterator.state then return end

-- Apply. Edit file at path while marking it not for tracking.

H.cache.oldfile.is_advancing = true

vim.cmd('edit ' .. oldfile_arr[res_arr_ind])

end

--- Quickfix from quickfix list

---

--- Go to next/previous entry from |quickfix| list. This is similar to

--- |:cfirst|, |:cprevious|, |:cnext|, and |:clast| but with support of

--- wrapping around edges and |[count]| for "first"/"last" direction.

---

--- Direction "forward" increases location number, "backward" - decreases.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.quickfix = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'quickfix')

opts =

vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().quickfix.options, opts or {})

H.qf_loc_implementation('quickfix', direction, opts)

end

--- Tree-sitter node

---

--- Go to end/start of current tree-sitter node and its parents (except root).

---

--- Notes:

--- - Requires |get_node_at_pos()| from |lua-treesitter| (present in Neovim=0.8)

--- or |vim.treesitter.get_node()| (present in Neovim>=0.9) along with loaded

--- tree-sitter parser in current buffer.

--- - Directions "first" and "last" work differently from most other targets

--- for performance reasons. They are essentially "backward" and "forward"

--- with very big `n_times` option.

--- - For similar reasons, `wrap` is not supported.

---

--- Direction "forward" moves cursor forward to node's end, "backward" - backward

--- to node's start.

---

---@param direction __bracketed_direction

---@param opts table|nil Options. A table with fields:

--- - <n_times> `(number)` - Number of times to advance. Default: |v:count1|.

--- __bracketed_add_to_jumplist

MiniBracketed.treesitter = function(direction, opts)

if H.get_treesitter_node == nil then

H.error(

'`treesitter()` target requires either `vim.treesitter.get_node()` or `vim.treesitter.get_node_at_pos()`.'

.. ' Use newer Neovim version.'

)

end

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'treesitter')

opts = vim.tbl_deep_extend(

'force',

{ add_to_jumplist = false, n_times = vim.v.count1 },

H.get_config().treesitter.options,

opts or {}

)

opts.wrap = false

if direction == 'first' then

direction, opts.n_times = 'backward', math.huge

end

if direction == 'last' then

direction, opts.n_times = 'forward', math.huge

end

-- Define iterator that traverses current node and its parents (except root)

local is_bad_node = function(node) return node == nil or node:parent() == nil end

local is_after = function(row_new, col_new, row_ref, col_ref)

return row_ref < row_new or (row_ref == row_new and col_ref < col_new)

end

local is_before = function(row_new, col_new, row_ref, col_ref) return is_after(row_ref, col_ref, row_new, col_new) end

local iterator = {}

-- Traverse node and parents until node's end is after current position

iterator.next = function(node_pos)

local node = node_pos.node

if is_bad_node(node) then return nil end

local init_row, init_col = node_pos.pos[1], node_pos.pos[2]

local cur_row, cur_col, cur_node = init_row, init_col, node

repeat

if is_bad_node(cur_node) then break end

cur_row, cur_col = cur_node:end_()

-- Correct for end-exclusiveness

cur_col = cur_col - 1

cur_node = cur_node:parent()

until is_after(cur_row, cur_col, init_row, init_col)

if not is_after(cur_row, cur_col, init_row, init_col) then return end

return { node = cur_node, pos = { cur_row, cur_col } }

end

-- Traverse node and parents until node's start is before current position

iterator.prev = function(node_pos)

local node = node_pos.node

if is_bad_node(node) then return nil end

local init_row, init_col = node_pos.pos[1], node_pos.pos[2]

local cur_row, cur_col, cur_node = init_row, init_col, node

repeat

if is_bad_node(cur_node) then break end

cur_row, cur_col = cur_node:start()

cur_node = cur_node:parent()

until is_before(cur_row, cur_col, init_row, init_col)

if not is_before(cur_row, cur_col, init_row, init_col) then return end

return { node = cur_node, pos = { cur_row, cur_col } }

end

local cur_pos = vim.api.nvim_win_get_cursor(0)

local ok, node = pcall(H.get_treesitter_node, cur_pos[1] - 1, cur_pos[2])

if not ok then

H.error(

'In `treesitter()` target can not find tree-sitter node under cursor.'

.. ' Do you have tree-sitter enabled in current buffer?'

)

end

iterator.state = { pos = { cur_pos[1] - 1, cur_pos[2] }, node = node }

-- Iterate

local res_node_pos = MiniBracketed.advance(iterator, direction, opts)

if res_node_pos == nil then return end

-- Possibly add current position to jumplist

if opts.add_to_jumplist then H.add_to_jumplist() end

-- Apply

local row, col = res_node_pos.pos[1], res_node_pos.pos[2]

vim.api.nvim_win_set_cursor(0, { row + 1, col })

end

--- Undo along a tracked linear history

---

--- In a nutshell:

--- - Keys |u| and |<C-R>| (although remapped) can be used as usual, but every

--- their execution new state is recorded in this module's linear undo history.

--- - Advancing this target goes along linear undo history revealing undo states

--- **in order they actually appeared**.

--- - One big difference with built-in methods is that tracked linear history

--- can repeat undo states (not consecutively, though).

---

--- Neovim's default way of managing undo history is through branches (see

--- |undo-branches|). Basically it means that if you undo several changes and then

--- make new ones, it creates new undo branch while usually (see |'undolevels'|)

--- saving previous buffer states in another branch. While there are commands

--- to navigate by time of undo state creation (like |:earlier| and |:later|),

--- there is no intuitive way to cycle through them. Existing |g-| and |g+|

--- cycle through undo states **based on their creation time**, which often

--- gets confusing really guickly in extensively edited buffer.

---

--- This `undo()` target provides a way to cycle through linear undo history

--- **in order states actually appeared**. It does so by registering any new undo

--- states plus every time |MiniBracketed.register_undo_state()| is called. To have

--- more "out of the box" experience, |u| and |<C-R>| are remapped to call it after

--- they perform their undo/redo.

---

--- Example ~

---

--- To show more clearly the difference between advancing this target and using

--- built-in functionality, here is an example:

---

--- - Create undo history in a new buffer (|:new|):

--- - Enter `one two three` text.

--- - Delete first word with `daw` and undo the change with `u`.

--- - Delete second word with `daw` and undo the change with `u`.

--- - Delete third word with `daw` and undo the change with `u`.

---

--- - Now try one of the following (each one after performing previous steps in

--- separate new buffer):

--- - Press `u`. It goes back to empty buffer. Press `<C-R>` twice and it

--- goes to the latest change (`one two`). No way to get to other states

--- (like `two three` or `one three`) with these two keys.

---

--- - Press `g-`. It goes to an empty buffer. Press `g+` 4 times. It cycles

--- through all available undo states **in order they were created**.

---

--- - Finally, press `[u`. It goes back to `one two` - state which was

--- **previously visited** by the user. Another `[u` restores `one two three`.

--- Use `]U` to go to latest visited undo state.

---

---@param direction __bracketed_direction

---@param opts __bracketed_opts

MiniBracketed.undo = function(direction, opts)

if H.is_disabled() then return end

H.validate_direction(direction, { 'first', 'backward', 'forward', 'last' }, 'undo')

opts = vim.tbl_deep_extend('force', { n_times = vim.v.count1, wrap = true }, H.get_config().undo.options, opts or {})

-- Define iterator that traverses undo states in order they appeared

local buf_id = vim.api.nvim_get_current_buf()

H.undo_sync(buf_id, vim.fn.undotree())

local iterator = {}

local buf_history = H.cache.undo[buf_id]

local n = #buf_history

iterator.next = function(id)

if id == nil or n <= id then return end

return id + 1

end

iterator.prev = function(id)

if id == nil or id <= 1 then return end

return id - 1

end

iterator.state = buf_history.current_id

iterator.start_edge = 0

iterator.end_edge = n + 1

View remainder of file in raw view

FilesExpand file tree

bracketed.lua

Latest commit

History

bracketed.lua

File metadata and controls