8000 minix/minix/man/man5/keymap.5 at imgbot · ikingye/minix · GitHub
[go: up one dir, main page]

Skip to content
  • Latest commit

     

    History

    History
    182 lines (182 loc) · 4.23 KB

    keymap.5

    File metadata and controls

    182 lines (182 loc) · 4.23 KB
    .TH KEYMAP 5
    .SH NAME
    keymap \- keyboard maps
    .SH SYNOPSIS
    .B /etc/keymap
    .SH DESCRIPTION
    .B /etc/keymap
    is the compressed mapping from keyboard scan codes to ASCII.
    It is made from a keymap source file consisting of MAP_COLS columns
    (MINIX assigns the value 6 to MAX_COLS, corresponding to key pressed,
    key+SHIFT, key+LEFT_ALT, key+RIGHT_ALT, key+ALT+SHIFT and key+CTRL) and
    NR_SCAN_CODES rows (MINIX assigns the value 0xE8 to NR_SCAN_CODES,
    corresponding to the range of defined USB HID key codes, which is the
    set of key codes that is to be provided by all keyboard drivers),
    and each element is 2 bytes in length (see u16_t in type definitions).
    The low order byte corresponds to the character represented by the scan
    code, and the high order byte corresponds to the special meaning (when
    CAPS LOCK has effect, if it is a function key, etc.), which is converted to
    binary keymap format using the
    .BR genmap
    utility.
    .PP
    .SS "Types (general): <sys/types.h>"
    <sys/types.h> defines the
    .B u8_t
    and
    .B u16_t
    types, corresponding to 8 and 16 bit values.
    .SS "Keys: <minix/input.h>"
    This header file contains the list of keys, prefixed by a
    .B INPUT_KEY_
    prefix. The
    .B K
    macro (see below) automatically adds the
    .B INPUT_KEY_
    prefix to the given key name. Input types from pages other than the key page
    are not supported by TTY.
    .SS "Macros: <minix/keymap.h>"
    .TP
    .BI "K(" k ") - Key"
    Maps to the entry for the key in the bitmap
    .TP
    .BI "C(" c ") - Control"
    Maps to control code
    .TP
    .BI "A(" c ") - Alt"
    Sets the eight bit
    .TP
    .BI "CA(" c ") - Control-Alt"
    Short for
    .BI "A(C(" c "))"
    .TP
    .BI "L(" c ") - Caps Lock"
    Adds Caps Lock effect
    8000
    .PP
    These macros are used in a keymap source file to help define keys. So
    instead of writing
    .B 032
    to put a CTRL-Z in the map you write
    .BR "C('Z')" .
    The
    .BI "L(" c ")"
    macro is used in column 0 to tell that the Caps Lock key is active for this
    key. (Caps Lock should only have effect on letters.)
    Similarly, some keys in column 0 have a
    .B N
    prefix to indicate that they are affected by the Num Lock key.
    .SS "Definitions: <minix/keymap.h>"
    <minix/keymap.h> contains a large number of definitions for special keys,
    like function keys, and keys on the numeric keypad. They are:
    .PP
    Modifier keys:
    .BR LCTRL ,
    .BR RCTRL ,
    .BR LSHIFT ,
    .BR RSHIFT ,
    .BR LALT ,
    .BR RALT .
    .PP
    Special keys:
    .BR HOME ,
    .BR END ,
    .BR UP ,
    .BR DOWN ,
    .BR LEFT ,
    .BR RIGHT ,
    .BR PGUP ,
    .BR PGDN ,
    .BR MID " (numeric '5'),"
    .BR MIN " (only with " A " or " C " prefix),"
    .BR PLUS ,
    .BR INSRT ,
    .BR DEL .
    .PP
    Special keys affected by Num Lock:
    .BR NHOME ,
    .BR NEND ", ..."
    .BR NINSRT ,
    .BR NDEL .
    .PP
    ALT + numpad key:
    .BR AHOME ,
    .BR AEND ", ...,"
    .BR AINSRT .
    .PP
    CTRL + numpad:
    .BR CHOME ,
    .BR CEND ", ...,"
    .BR CINSRT .
    .PP
    Lock keys:
    .BR CALOCK " (Caps Lock),"
    .BR NLOCK " (Num Lock),"
    .BR SLOCK " (Scroll Lock)."
    .PP
    Function keys:
    .BR F1 ", ...,"
    .BR F12 .
    .PP
    ALT - function key:
    .BR AF1 ", ...,"
    .BR AF12 .
    .PP
    CTRL - function key:
    .BR CF1 ", ...,"
    .BR CF12 .
    .PP
    SHIFT - function key:
    .BR SF1 ", ...,"
    .BR SF12 .
    .PP
    ALT - SHIFT - function key:
    .BR ASF1 ", ...,"
    .BR ASF12 .
    .PP
    .SS "Creating/changing keyboard mapping"
    You can create your own keyboard mapping by copying one of the existing
    keymap source files (Standard Minix:
    .BR drivers/tty/keymaps/*.src )
    and modifying the desired keys. Once this has been done, you need to
    recompile the genmap.c file, either by adding a new entry to the Makefile,
    or by running the following commands:
    .PP
    .RS
    .ft B
    cc -DKEYSRC=\e"\fIkeymap\fP.src\e" genmap.c
    .ft P
    .RE
    .PP
    After this, the
    .BR keymap
    file can be generated by running:
    .PP
    .RS
    .BI "a.out > " keymap .map
    .RE
    .PP
    The keymap can be loaded in the keyboard driver by:
    .PP
    .RS
    .BI "loadkeys " keymap .map
    .RE
    .PP
    It is wise to first run
    .B loadkeys
    on one of the maps in
    .B /usr/lib/keymaps
    so that you can easily revert back to a known keymap with a few taps on the
    up-arrow key and pressing return. You will otherwise have to fix the keymap
    with a faulty keymap loaded into the keyboard driver, which is no fun.
    .PP
    When the keymap is to your satisfaction you can copy it to
    .B /etc/keymap
    to have it loaded automatically at reboot.
    .SH FILES
    .TP 15
    .B /etc/keymap
    Default keymap file
    .SH "SEE ALSO"
    .B loadkeys (1).
    .SH AUTHOR
    Victor A. Rodriguez - El bit Fantasma (Bit-Man@Tasa.Com.AR)
    0