Repository navigation
Open
Description
Basic information
- Laptop model: CHUWI MiniBook X N150
- Linux distro: CachyOS + KDE Plasma
uname -aoutput:
tools/check-status.sh output:
--- device ---
dmi vendor CHUWI Innovation And Technology(ShenZhen)co.,Ltd
dmi product MiniBook X
cpu Intel(R) N150
microcode 0x21
bios DNN20A V2.51 04/16/2025
display card1-DSI-1 1200x1920
panel rotation right-side-up/270° (laptop mode reports normal)
sleep mode S3 (hardware)
--- kernel cmdline ---
i915.vbt_firmware �[33mWARN�[0m not set -- see GUIDE.md
i915.enable_psr 0 (disabled)
--- vbt ---
skipped (intel_vbt_decode not found)
--- prerequisites ---
dkms ok
clang ok
curl ok
patch ok
meson ok
ninja ok
kernel headers ok
--- modules ---
goodix_ts 7.3.4.minibook1.a5bb9929b672, loaded, boot
goodix firmware ok
minibook_ec 1.0, loaded, boot
dptf_enabler 1.0, loaded, boot
i2c_designware_spklen 1.0, loaded, boot
--- services ---
thermald 2.5.11.minibook1, enabled, running
running executable: /proc/562/exe
iio-sensor-proxy 3.9.minibook1, static, running
sensor polling active (client claimed)
--- warnings ---
i915.vbt_firmware: not set -- see GUIDE.md
tools/detect-hardware.sh output:
ID DRIVER NAME
dmi:vendor <empty> CHUWI Innovation And Technology(ShenZhen)co.,Ltd
dmi:product <empty> MiniBook X
dmi:bios <empty> DNN20A V2.51 04/16/2025
cpu:0 <empty> Intel(R) N150
pci:8086:46d4 i915 Intel Corporation Alder Lake-N [Intel Graphics]
pci:8086:461d proc_thermal_pci Intel Corporation Alder Lake In
8000
novation Platform Framework Processor Participant
pci:8086:54ed xhci_hcd Intel Corporation Alder Lake-N PCH USB 3.2 Gen 2x1 (10 Gb/s) xHCI Host Controller
pci:8086:54f0 iwlwifi Intel Corporation Alder Lake-N PCH CNVi WiFi
pci:8086:54d3 ahci Intel Corporation Alder Lake-N SATA AHCI Controller
pci:8086:54c4 sdhci-pci Intel Corporation Alder Lake-N eMMC Controller
pci:8086:54c8 snd_hda_intel Intel Corporation Alder Lake-N PCH High Definition Audio Controller
usb:8087:0026 usb <empty>
usb:1b0a:2bc9 usb Hy-Usb2.0-1*MIC
i2c:GDIX1002 Goodix-TS Goodix Capacitive TouchScreen
i2c:MDA6655 mxc4005 <empty>
i2c:XXXX0000 i2c_hid_acpi XXXX0000:05 0911:5288
acpi:ACPI0003 <empty> <empty>
acpi:ACPI000C <empty> <empty>
acpi:ACPI000E <empty> <empty>
acpi:GDIX1002 <empty> <empty>
acpi:INT33A1 <empty> <empty>
acpi:INT33D3 <empty> <empty>
acpi:INT340E <empty> <empty>
acpi:INTC1041 <empty> <empty>
acpi:INTC1046 <empty> Thermistor Ambient
acpi:INTC1049 <empty> Intel PCH FIVR Participant
acpi:INTC1057 <empty> <empty>
acpi:INTC1060 <empty> Platform Power
acpi:INTC1061 <empty> Battery 1 Participant
acpi:INTC1070 <empty> <empty>
acpi:INTC1099 <empty> <empty>
acpi:MDA6655 <empty> <empty>
acpi:MSFT0001 <empty> <empty>
acpi:MSFT0101 <empty> TPM 2.0 Device
acpi:PNP0103 <empty> <empty>
acpi:PNP0C02 <empty> <empty>
acpi:PNP0C02 <empty> <empty>
acpi:PNP0C02 <empty> <empty>
acpi:PNP0C09 <empty> <empty>
acpi:PNP0C0A <empty> <empty>
acpi:PNP0C0C <empty> <empty>
acpi:PNP0C0D <empty> <empty>
acpi:PNP0C0E <empty> <empty>
acpi:PRP00001 <empty> <empty>
acpi:PRP00001 <empty> <empty>
acpi:XXXX0000 <empty> <empty>
blk:sda sd SanDisk SD8TN8U- (476 GB)
drm:card1-DSI-1 <empty> Internal panel 1200x1920
backlight:intel_backlight <empty> raw
hwmon:hwmon0 <empty> ADP1
hwmon:hwmon1 <empty> acpitz
hwmon:hwmon2 <empty> BAT0
hwmon:hwmon3 <empty> minibook_soc
hwmon:hwmon4 <empty> minibook_charger
hwmon:hwmon5 <empty> minibook_fan
hwmon:hwmon6 <empty> iwlwifi_1
hwmon:hwmon7 <empty> coretemp
tpm:tpm0 <empty> v2
monitor-sensor output:
Waiting for iio-sensor-proxy to appear
+++ iio-sensor-proxy appeared
=== Has accelerometer (orientation: normal, tilt: vertical)
=== No ambient light sensor
=== No proximity sensor
=== No compass
journalctl -u iio-sensor-proxy -f output:
11月 17 23:11:16 cachyos-x8664 systemd[1]: Starting IIO Sensor Proxy service...
11月 17 23:11:16 cachyos-x8664 systemd[1]: Started IIO Sensor Proxy service.
11月 17 23:11:16 cachyos-x8664 iio-sensor-proxy[556]: MXC6655: DRM panel orientation 3, compensating sensor output by 270°, laptop mode reports orientation 0
11月 17 23:11:16 cachyos-x8664 iio-sensor-proxy[556]: MXC6655: orientation sensor is second (\_SB.PC00.I2C1)
11月 17 23:11:16 cachyos-x8664 iio-sensor-proxy[556]: MXC6655 dual-accel: polling active
I had today time to check last updates. Clear installation of CachyOS KDE Plasma. This time 0 problems with your instruction, everything was ok with step by step installation. However my auto-rotation doesnt work at all, in monitor-sensor I dont see any changes during tilting. Bootmanager, login screen, system always looks like on attached photo. In display settings orientation is set to automatic.
BTW. No permission to re-open last ticket ;)
Metadata
Metadata
Assignees
Labels
No labels
Activity
fstanis commentedon Nov 18, 2026
Can you try going to tablet mode (flip the screen around fully) and tell me:
And if you could share any logs after doing this.
Policjant commentedon Nov 19, 2026
In horizonal when I go to tablet mode nothing happens. But when in tablet mode I hold it vertically its rotate but of course wrong :P (photo)
Yes in tablet mode( horizontal & vertical) keyboard and touchpad are disabled.
What logs do u want to see?
fstanis commentedon Nov 20, 2026
Your panel rotation is
right-side-up/270°- have you applied the kernel command line patch?Either way, this seems to be a bug caused by #13 which was an incorrect thing to do - Gnome and KDE both already compute the correct rotation and it made the sensor give them incorrect readings.
The fix is in #38, could you try that and let me know if it works?
Policjant commentedon Nov 20, 2026
Nothing like that. Just clean installation of CachyOS + your mod :)
Just installed ;) and I think we have progress. Pc mode still the same problem but tablet mode horizontal / vertical works well ;)!
fstanis commentedon Nov 20, 2026
In that case, I believe KDE is simply not listening to
iio-sensor-proxyevents unless it's in tablet mode. Can you show me what the settings look like for this?My guess is that this should work:
Alternatively, there may be a setting for "auto rotation only in tablet mode" - if so, you can disable it.