8000 mini.nvim/lua/mini/pairs.lua at main · GitMurf/mini.nvim · GitHub
[go: up one dir, main page]
Skip to content

pairs.lua

Latest commit

 

History

History
654 lines (575 loc) · 25 KB

pairs.lua

File metadata and controls

654 lines (575 loc) · 25 KB
Raw
--- *mini.pairs* Autopairs
--- *MiniPairs*
---
--- MIT License Copyright (c) 2021 Evgeni Chasnovski
---
--- ==============================================================================
---
--- Features:
--- - Functionality to work with two "paired" characters conditional on cursor's
--- neighborhood (character to its left and character to its right).
---
--- - Usage should be through making appropriate mappings using |MiniPairs.map|
--- or in |MiniPairs.setup| (for global mapping), |MiniPairs.map_buf| (for
--- buffer mapping).
---
--- - Pairs get automatically registered to be recognized by `<BS>` and `<CR>`.
---
--- What it doesn't do:
--- - It doesn't support multiple characters as "open" and "close" symbols. Use
--- snippets for that.
---
--- - It doesn't support dependency on filetype. Use |i_CTRL-V| to insert
--- single symbol or `autocmd` command or 'after/ftplugin' approach to:
--- - `:lua MiniPairs.map_buf(0, 'i', <*>, <pair_info>)` - make new mapping
--- for '<*>' in current buffer.
--- - `:lua MiniPairs.unmap_buf(0, 'i', <*>, <pair>)` - unmap key `<*>` while
--- unregistering `<pair>` pair in current buffer. Note: this reverts
--- mapping done by |MiniPairs.map_buf|. If mapping was done with
--- |MiniPairs.map|, unmap for buffer in usual Neovim manner:
--- `inoremap <buffer> <*> <*>` (this maps `<*>` key to do the same it
--- does by default).
--- - Disable module for buffer (see 'Disabling' section).
---
--- # Setup ~
---
--- This module needs a setup with `require('mini.pairs').setup({})`
--- (replace `{}` with your `config` table). It will create global Lua table
--- `MiniPairs` which you can use for scripting or manually (with
--- `:lua MiniPairs.*`).
---
--- See |MiniPairs.config| for `config` structure and default values.
---
--- This module doesn't have runtime options, so using `vim.b.minipairs_config`
--- will have no effect here.
---
--- # Example mappings ~
--- >lua
--- -- Register quotes inside `config` of `MiniPairs.setup()`
--- mappings = {
--- ['"'] = { register = { cr = true } },
--- ["'"] = { register = { cr = true } },
--- }
---
--- -- Insert `<>` pair if `<` is typed at line start, don't register for `<CR>`
--- local lt_opts = {
--- action = 'open',
--- pair = '<>',
--- neigh_pattern = '\r.',
--- register = { cr = false },
--- }
--- MiniPairs.map('i', '<', lt_opts)
---
--- local gt_opts = { action = 'close', pair = '<>', register = { cr = false } }
--- MiniPairs.map('i', '>', gt_opts)
---
--- -- Create symmetrical `$$` pair only in Tex files
--- local map_tex = function()
--- MiniPairs.map_buf(0, 'i', '$', { action = 'closeopen', pair = '$$' })
--- end
--- vim.api.nvim_create_autocmd(
--- 'FileType',
--- { pattern = 'tex', callback = map_tex }
--- )
--- <
--- # Notes ~
---
--- - Make sure to make proper mapping of `<CR>` in order to support completion
--- plugin of your choice:
--- - For |MiniCompletion| see 'Helpful key mappings' section.
--- - For current implementation of "hrsh7th/nvim-cmp" there is no need to
--- make custom mapping. You can use default setup, which will confirm
--- completion selection if popup is visible and expand pair otherwise.
--- - Having mapping in terminal mode can conflict with:
--- - Autopairing capabilities of interpretators (`ipython`, `radian`).
--- - Vim mode of terminal itself.
---
--- # Disabling ~
---
--- To disable, set `vim.g.minipairs_disable` (globally) or `vim.b.minipairs_disable`
--- (for a buffer) to `true`. Considering high number of different scenarios
--- and customization intentions, writing exact rules for disabling module's
--- functionality is left to user. See |mini.nvim-disabling-recipes| for common
--- recipes.
---@alias __pairs_neigh_pattern string|nil Pattern for two neighborhood characters.
--- Character "\r" indicates line start, "\n" - line end.
---@alias __pairs_pair string String with two characters representing pair.
---@alias __pairs_unregistered_pair string Pair which should be unregistered from both
--- `<BS>` and `<CR>`. Should be explicitly supplied to avoid confusion.
--- Supply `''` to not unregister pair.
-- Module definition ==========================================================
local MiniPairs = {}
local H = {}
--- Module setup
---
---@param config table|nil Module config table. See |MiniPairs.config|.
---
---@usage >lua
--- require('mini.pairs').setup() -- use default config
--- -- OR
--- require('mini.pairs').setup({}) -- replace {} with your config table
--- <
MiniPairs.setup = function(config)
-- Export module
_G.MiniPairs = MiniPairs
-- Setup config
config = H.setup_config(config)
-- Apply config
H.apply_config(config)
-- Define behavior
H.create_autocommands()
end
--stylua: ignore
--- Module config
---
--- Default values:
---@eval return MiniDoc.afterlines_to_code(MiniDoc.current.eval_section)
MiniPairs.config = {
-- In which modes mappings from this `config` should be created
modes = { insert = true, command = false, terminal = false },
-- Global mappings. Each right hand side should be a pair information, a
-- table with at least these fields (see more in |MiniPairs.map|):
-- - <action> - one of "open", "close", "closeopen".
-- - <pair> - two character string for pair to be used.
-- By default pair is not inserted after `\`, quotes are not recognized by
-- `<CR>`, `'` does not insert pair after a letter.
8000 -- Only parts of tables can be tweaked (others will use these defaults).
-- Supply `false` instead of table to not map particular key.
mappings = {
['('] = { action = 'open', pair = '()', neigh_pattern = '[^\\].' },
['['] = { action = 'open', pair = '[]', neigh_pattern = '[^\\].' },
['{'] = { action = 'open', pair = '{}', neigh_pattern = '[^\\].' },
[')'] = { action = 'close', pair = '()', neigh_pattern = '[^\\].' },
[']'] = { action = 'close', pair = '[]', neigh_pattern = '[^\\].' },
['}'] = { action = 'close', pair = '{}', neigh_pattern = '[^\\].' },
['"'] = { action = 'closeopen', pair = '""', neigh_pattern = '[^\\].', register = { cr = false } },
["'"] = { action = 'closeopen', pair = "''", neigh_pattern = '[^%a\\].', register = { cr = false } },
['`'] = { action = 'closeopen', pair = '``', neigh_pattern = '[^\\].', register = { cr = false } },
},
}
--minidoc_afterlines_end
-- Module functionality =======================================================
--- Make global mapping
---
--- This is a wrapper for |nvim_set_keymap()| but instead of right hand side of
--- mapping (as string) it expects table with pair information.
---
--- Using this function instead of |nvim_set_keymap()| allows automatic
--- registration of pairs which will be recognized by `<BS>` and `<CR>`.
--- It also infers mapping description from `pair_info`.
---
---@param mode string `mode` for |nvim_set_keymap()|.
---@param lhs string `lhs` for |nvim_set_keymap()|.
---@param pair_info table Table with pair information. Fields:
--- - <action> - one of "open" (for |MiniPairs.open|),
--- "close" (for |MiniPairs.close|), or "closeopen" (for |MiniPairs.closeopen|).
--- - <pair> - two character string to be used as argument for action function.
--- - <neigh_pattern> - optional 'two character' neighborhood pattern to be
--- used as argument for action function.
--- Default: `'..'` (no restriction from neighborhood).
--- - <register> - optional table with information about whether this pair will
--- be recognized by `<BS>` (in |MiniPairs.bs|) and/or `<CR>` (in |MiniPairs.cr|).
--- Should have boolean fields <bs> and <cr> which are both `true` by
--- default (if not overridden explicitly).
---@param opts table|nil Optional table `opts` for |nvim_set_keymap()|. Elements
--- `expr` and `noremap` won't be recognized (`true` by default).
MiniPairs.map = function(mode, lhs, pair_info, opts)
pair_info = H.validate_pair_info(pair_info)
opts = vim.tbl_deep_extend('force', opts or {}, { expr = true, noremap = true })
opts.desc = H.infer_mapping_description(pair_info)
vim.api.nvim_set_keymap(mode, lhs, H.pair_info_to_map_rhs(pair_info), opts)
H.register_pair(pair_info, mode, 'all')
-- Ensure that `<BS>` and `<CR>` are mapped for input mode
H.ensure_cr_bs(mode)
end
--- Make buffer mapping
---
--- This is a wrapper for |nvim_buf_set_keymap()| but instead of string right
--- hand side of mapping it expects table with pair information similar to one
--- in |MiniPairs.map|.
---
--- Using this function instead of |nvim_buf_set_keymap()| allows automatic
--- registration of pairs which will be recognized by `<BS>` and `<CR>`.
--- It also infers mapping description from `pair_info`.
---
---@param buffer number `buffer` for |nvim_buf_set_keymap()|.
---@param mode string `mode` for |nvim_buf_set_keymap()|.
---@param lhs string `lhs` for |nvim_buf_set_keymap()|.
---@param pair_info table Table with pair information.
---@param opts table|nil Optional table `opts` for |nvim_buf_set_keymap()|.
--- Elements `expr` and `noremap` won't be recognized (`true` by default).
MiniPairs.map_buf = function(buffer, mode, lhs, pair_info, opts)
pair_info = H.validate_pair_info(pair_info)
opts = vim.tbl_deep_extend('force', opts or {}, { expr = true, noremap = true })
opts.desc = H.infer_mapping_description(pair_info)
vim.api.nvim_buf_set_keymap(buffer, mode, lhs, H.pair_info_to_map_rhs(pair_info), opts)
H.register_pair(pair_info, mode, buffer == 0 and vim.api.nvim_get_current_buf() or buffer)
-- Ensure that `<BS>` and `<CR>` are mapped for input mode
H.ensure_cr_bs(mode)
end
--- Remove global mapping
---
--- A wrapper for |nvim_del_keymap()| which registers supplied `pair`.
---
---@param mode string `mode` for |nvim_del_keymap()|.
---@param lhs string `lhs` for |nvim_del_keymap()|.
---@param pair __pairs_unregistered_pair
MiniPairs.unmap = function(mode, lhs, pair)
-- `pair` should be supplied explicitly
H.check_type('pair', pair, 'string')
-- Use `pcall` to allow 'deleting' already deleted mapping
pcall(vim.api.nvim_del_keymap, mode, lhs)
if pair == '' then return end
H.unregister_pair(pair, mode, 'all')
end
--- Remove buffer mapping
---
--- Wrapper for |nvim_buf_del_keymap()| which also unregisters supplied `pair`.
---
--- Note: this only reverts mapping done by |MiniPairs.map_buf|. If mapping was
--- done with |MiniPairs.map|, revert to default behavior for buffer: >lua
---
--- -- Map `X` key to do the same it does by default
--- vim.keymap.set('i', 'X', 'X', { buffer = true })
--- <
---@param buffer number `buffer` for |nvim_buf_del_keymap()|.
---@param mode string `mode` for |nvim_buf_del_keymap()|.
---@param lhs string `lhs` for |nvim_buf_del_keymap()|.
---@param pair __pairs_unregistered_pair
MiniPairs.unmap_buf = function(buffer, mode, lhs, pair)
-- `pair` should be supplied explicitly
H.check_type('pair', pair, 'string')
-- Use `pcall` to allow 'deleting' already deleted mapping
pcall(vim.api.nvim_buf_del_keymap, buffer, mode, lhs)
if pair == '' then return end
H.unregister_pair(pair, mode, buffer == 0 and vim.api.nvim_get_current_buf() or buffer)
end
--- Process "open" symbols
---
--- Used as |map-expr| mapping for "open" symbols in asymmetric pair ('(', '[',
--- etc.). If neighborhood doesn't match supplied pattern, function results
--- into "open" symbol. Otherwise, it pastes whole pair and moves inside pair
--- with |<Left>|.
---
--- Used inside |MiniPairs.map| and |MiniPairs.map_buf| for an actual mapping.
---
---@param pair __pairs_pair
---@param neigh_pattern __pairs_neigh_pattern
---
---@return string Keys performing "open" action.
MiniPairs.open = function(pair, neigh_pattern)
if H.is_disabled() or not H.neigh_match(neigh_pattern) then return pair:sub(1, 1) end
-- Temporarily redraw lazily for no cursor flicker due to `<Left>`.
-- This can happen in a big file with tree-sitter highlighting enabled.
local cache_lazyredraw = vim.o.lazyredraw
vim.o.lazyredraw = true
H.restore_lazyredraw(cache_lazyredraw)
return ('%s%s'):format(pair, H.get_arrow_key('left'))
end
--- Process "close" symbols
---
--- Used as |map-expr| mapping for "close" symbols in asymmetric pair (')',
--- ']', etc.). If neighborhood doesn't match supplied pattern, function
--- results into "close" symbol. Otherwise it jumps over symbol to the right of
--- cursor (with |<Right>|) if it is equal to "close" one and inserts it
--- otherwise.
---
--- Used inside |MiniPairs.map| and |MiniPairs.map_buf| for an actual mapping.
---
---@param pair __pairs_pair
---@param neigh_pattern __pairs_neigh_pattern
---
---@return string Keys performing "close" action.
MiniPairs.close = function(pair, neigh_pattern)
if H.is_disabled() or not H.neigh_match(neigh_pattern) then return pair:sub(2, 2) end
local close = pair:sub(2, 2)
if H.get_cursor_neigh(1, 1) == close then
return H.get_arrow_key('right')
else
return close
end
end
--- Process "closeopen" symbols
---
--- Used as |map-expr| mapping for 'symmetrical' symbols (from pairs '""',
--- '\'\'', '``'). It tries to perform 'closeopen action': move over right
--- character (with |<Right>|) if it is equal to second character from pair or
--- conditionally paste pair otherwise (with |MiniPairs.open()|).
---
--- Used inside |MiniPairs.map| and |MiniPairs.map_buf| for an actual mapping.
---
---@param pair __pairs_pair
---@param neigh_pattern __pairs_neigh_pattern
---
---@return string Keys performing "closeopen" action.
MiniPairs.closeopen = function(pair, neigh_pattern)
if H.is_disabled() or H.get_cursor_neigh(1, 1) ~= pair:sub(2, 2) then
return MiniPairs.open(pair, neigh_pattern)
else
return H.get_arrow_key('right')
end
end
--- Process |<BS>|
---
--- Used as |map-expr| mapping for `<BS>` in Insert mode. It removes whole pair
--- (via executing `<Del>` after input key) if neighborhood is equal to a whole
--- pair recognized for current buffer. Pair is recognized for current buffer
--- if it is registered for global or current buffer mapping. Pair is
--- registered as a result of calling |MiniPairs.map| or |MiniPairs.map_buf|.
---
--- Mapped by default inside |MiniPairs.setup|.
---
--- This can be used to modify other Insert mode keys to respect neighborhood
--- pair. Examples: >lua
---
--- local map_bs = function(lhs, rhs)
--- vim.keymap.set('i', lhs, rhs, { expr = true, replace_keycodes = false })
--- end
---
--- map_bs('<C-h>', 'v:lua.MiniPairs.bs()')
--- map_bs('<C-w>', 'v:lua.MiniPairs.bs("\23")')
--- map_bs('<C-u>', 'v:lua.MiniPairs.bs("\21")')
--- <
---@param key string|nil Key to use. Default: `<BS>`.
---
---@return string Keys performing "backspace" action.
MiniPairs.bs = function(key)
local res = key or H.keys.bs
local neigh = H.get_cursor_neigh(0, 1)
if not H.is_disabled() and H.is_pair_registered(neigh, vim.fn.mode(), 0, 'bs') then
res = ('%s%s'):format(res, H.keys.del)
end
return res
end
--- Process |i_<CR>|
---
--- Used as |map-expr| mapping for `<CR>` in insert mode. It puts "close"
--- symbol on next line (via `<CR><C-o>O`) if neighborhood is equal to a whole
--- pair recognized for current buffer. Pair is recognized for current buffer
--- if it is registered for global or current buffer mapping. Pair is
--- registered as a result of calling |MiniPairs.map| or |MiniPairs.map_buf|.
---
--- Note: some relevant mode changing events are temporarily ignored
--- (with |eventignore|) to counter effect of using |i_CTRL-O|.
---
--- Mapped by default inside |MiniPairs.setup|.
---
---@param key string|nil Key to use. Default: `<CR>`.
---
---@return string Keys performing "new line" action.
MiniPairs.cr = function(key)
local res = key or H.keys.cr
local neigh = H.get_cursor_neigh(0, 1)
if not H.is_disabled() and H.is_pair_registered(neigh, vim.fn.mode(), 0, 'cr') then
-- Temporarily ignore mode change to not trigger some common expensive
-- autocommands (like diagnostic check, etc.)
local cache_eventignore = vim.o.eventignore
vim.o.eventignore = 'InsertLeave,InsertLeavePre,InsertEnter,TextChanged,ModeChanged'
H.restore_eventignore(cache_eventignore)
-- Temporarily redraw lazily for no cursor flicker due to `<C-o>O`.
-- This can happen in a big file with tree-sitter highlighting enabled.
local cache_lazyredraw = vim.o.lazyredraw
vim.o.lazyredraw = true
H.restore_lazyredraw(cache_lazyredraw)
res = ('%s%s'):format(res, H.keys.above)
end
return res
end
-- Helper data ================================================================
-- Module default config
H.default_config = vim.deepcopy(MiniPairs.config)
-- Default value of `pair_info` for mapping functions
H.default_pair_info = { neigh_pattern = '..', register = { bs = true, cr = true } }
-- Pair sets registered *per mode-buffer-key*. Buffer `'all'` contains pairs
-- registered for all buffers.
H.registered_pairs = {
i = { all = { bs = {}, cr = {} } },
c = { all = { bs = {}, cr = {} } },
t = { all = { bs = {}, cr = {} } },
}
-- Precomputed keys to increase speed
-- stylua: ignore start
local function escape(s) return vim.api.nvim_replace_termcodes(s, true, true, true) end
H.keys = {
above = escape('<C-o>O'),
bs = escape('<bs>'),
cr = escape('<cr>'),
del = escape('<del>'),
keep_undo = escape('<C-g>U'),
-- NOTE: use `get_arrow_key()` instead of `H.keys.left` or `H.keys.right`
left = escape('<left>'),
right = escape('<right>')
}
-- stylua: ignore end
-- Helper functionality =======================================================
-- Settings -------------------------------------------------------------------
H.setup_config = function(config)
H.check_type('config', config, 'table', true)
config = vim.tbl_deep_extend('force', vim.deepcopy(H.default_config), config or {})
H.check_type('modes', config.modes, 'table')
H.check_type('modes.insert', config.modes.insert, 'boolean')
H.check_type('modes.command', config.modes.command, 'boolean')
H.check_type('modes.terminal', config.modes.terminal, 'boolean')
H.check_type('mappings', config.mappings, 'table')
local validate_mapping = function(pair_info, prefix)
-- Allow `false` to not create mapping
if pair_info == false then return end
H.validate_pair_info(pair_info, prefix)
end
validate_mapping(config.mappings['('], "mappings['(']")
validate_mapping(config.mappings['['], "mappings['[']")
validate_mapping(config.mappings['{'], "mappings['{']")
validate_mapping(config.mappings[')'], "mappings[')']")
validate_mapping(config.mappings[']'], "mappings[']']")
validate_mapping(config.mappings['}'], "mappings['}']")
validate_mapping(config.mappings['"'], "mappings['\"']")
validate_mapping(config.mappings["'"], 'mappings["\'"]')
validate_mapping(config.mappings['`'], "mappings['`']")
return config
end
H.apply_config = function(config)
MiniPairs.config = config
-- Setup mappings in supplied modes
local mode_ids = { insert = 'i', command = 'c', terminal = 't' }
-- Compute in which modes mapping should be set up
local mode_array = {}
for name, to_set in pairs(config.modes) do
if to_set then table.insert(mode_array, mode_ids[name]) end
end
local map_conditionally = function(mode, key, pair_info)
-- Allow `false` to not create mapping
if pair_info == false then return end
-- This also should take care of mapping `<BS>` and `<CR>`
MiniPairs.map(mode, key, pair_info)
end
for _, mode in pairs(mode_array) do
for key, pair_info in pairs(config.mappings) do
map_conditionally(mode, key, pair_info)
end
end
end
H.create_autocommands = function()
local gr = vim.api.nvim_create_augroup('MiniPairs', {})
local au = function(event, pattern, callback, desc)
vim.api.nvim_create_autocmd(event, { group = gr, pattern = pattern, callback = callback, desc = desc })
end
au('FileType', { 'TelescopePrompt', 'fzf' }, function() vim.b.minipairs_disable = true end, 'Disable locally')
end
H.is_disabled = function() return vim.g.minipairs_disable == true or vim.b.minipairs_disable == true end
-- Pair registration ----------------------------------------------------------
H.register_pair = function(pair_info, mode, buffer)
-- Process new mode
H.registered_pairs[mode] = H.registered_pairs[mode] or { all = { bs = {}, cr = {} } }
local mode_pairs = H.registered_pairs[mode]
-- Process new buffer
mode_pairs[buffer] = mode_pairs[buffer] or { bs = {}, cr = {} }
-- Register pair if it is not already registered
local register, pair = pair_info.register, pair_info.pair
if register.bs and not vim.tbl_contains(mode_pairs[buffer].bs, pair) then
table.insert(mode_pairs[buffer].bs, pair)
end
if register.cr and not vim.tbl_contains(mode_pairs[buffer].cr, pair) then
table.insert(mode_pairs[buffer].cr, pair)
end
end
H.unregister_pair = function(pair, mode, buffer)
local mode_pairs = H.registered_pairs[mode]
if not (mode_pairs and mode_pairs[buffer]) then return end
local buf_pairs = mode_pairs[buffer]
for _, key in ipairs({ 'bs', 'cr' }) do
for i, p in ipairs(buf_pairs[key]) do
if p == pair then table.remove(buf_pairs[key], i) end
end
end
end
H.is_pair_registered = function(pair, mode, buffer, key)
local mode_pairs = H.registered_pairs[mode]
if not mode_pairs then return false end
if vim.tbl_contains(mode_pairs['all'][key], pair) then return true end
buffer = buffer == 0 and vim.api.nvim_get_current_buf() or buffer
local buf_pairs = mode_pairs[buffer]
if not buf_pairs then return false end
return vim.tbl_contains(buf_pairs[key], pair)
end
H.ensure_cr_bs = function(mode)
local has_any_cr_pair, has_any_bs_pair = false, false
for _, pair_tbl in pairs(H.registered_pairs[mode]) do
has_any_cr_pair = has_any_cr_pair or not vim.tbl_isempty(pair_tbl.cr)
has_any_bs_pair = has_any_bs_pair or not vim.tbl_isempty(pair_tbl.bs)
end
-- NOTE: this doesn't distinguish between global and buffer mappings. Both
-- `<BS>` and `<CR>` should work as normal even if no pairs are registered
if has_any_bs_pair then
-- Use not `silent` in Command mode to make it redraw
local opts = { silent = mode ~= 'c', expr = true, replace_keycodes = false, desc = 'MiniPairs <BS>' }
H.map(mode, '<BS>', 'v:lua.MiniPairs.bs()', opts)
end
if mode == 'i' and has_any_cr_pair then
local opts = { expr = true, replace_keycodes = false, desc = 'MiniPairs <CR>' }
H.map(mode, '<CR>', 'v:lua.MiniPairs.cr()', opts)
end
end
-- Work with pair_info --------------------------------------------------------
H.validate_pair_info = function(pair_info, prefix)
prefix = prefix or 'pair_info'
H.check_type(prefix, pair_info, 'table')
pair_info = vim.tbl_deep_extend('force', H.default_pair_info, pair_info)
H.check_type(prefix .. '.action', pair_info.action, 'string')
H.check_type(prefix .. '.pair', pair_info.pair, 'string')
H.check_type(prefix .. '.neigh_pattern', pair_info.neigh_pattern, 'string')
H.check_type(prefix .. '.register', pair_info.register, 'table')
H.check_type(prefix .. '.register.bs', pair_info.register.bs, 'boolean')
H.check_type(prefix .. '.register.cr', pair_info.register.cr, 'boolean')
return pair_info
end
H.pair_info_to_map_rhs = function(pair_info)
return ('v:lua.MiniPairs.%s(%s, %s)'):format(
pair_info.action,
vim.inspect(pair_info.pair),
vim.inspect(pair_info.neigh_pattern)
)
end
H.infer_mapping_description = function(pair_info)
local action_name = pair_info.action:sub(1, 1):upper() .. pair_info.action:sub(2)
return ('%s action for %s pair'):format(action_name, vim.inspect(pair_info.pair))
end
-- Utilities ------------------------------------------------------------------
H.error = function(msg) error('(mini.pairs) ' .. msg, 0) end
H.check_type = function(name, val, ref, allow_nil)
if type(val) == ref or (ref == 'callable' and vim.is_callable(val)) or (allow_nil and val == nil) then return end
H.error(string.format('`%s` should be %s, not %s', name, ref, type(val)))
end
H.get_cursor_neigh = function(start, finish)
local line, col
if vim.fn.mode() == 'c' then
line = vim.fn.getcmdline()
col = vim.fn.getcmdpos()
-- Adjust start and finish because output of `getcmdpos()` starts counting
-- columns from 1
start = start - 1
finish = finish - 1
else
line = vim.api.nvim_get_current_line()
col = vim.api.nvim_win_get_cursor(0)[2]
end
-- Add '\r' and '\n' to always return 2 characters
return string.sub(('%s%s%s'):format('\r', line, '\n'), col + 1 + start, col + 1 + finish)
end
H.neigh_match = function(pattern) return (pattern == nil) or (H.get_cursor_neigh(0, 1):find(pattern) ~= nil) end
H.get_arrow_key = function(key)
if vim.fn.mode() == 'i' then
-- Using left/right keys in insert mode breaks undo sequence and, more
-- importantly, dot-repeat. To avoid this, use 'i_CTRL-G_U' mapping.
return H.keys.keep_undo .. H.keys[key]
else
return H.keys[key]
end
end
H.map = function(mode, lhs, rhs, opts)
if lhs == '' then return end
opts = vim.tbl_deep_extend('force', { silent = true }, opts or {})
vim.keymap.set(mode, lhs, rhs, opts)
end
H.restore_eventignore = vim.schedule_wrap(function(val) vim.o.eventignore = val end)
H.restore_lazyredraw = vim.schedule_wrap(function(val) vim.o.lazyredraw = val end)
return MiniPairs
0