mini.nvim/lua/mini/surround.lua at main · proofer/mini.nvim

Repository navigation

--- *mini.surround* Surround actions
--- MIT License Copyright (c) 2021 Evgeni Chasnovski
--- Fast and feature-rich surrounding. Can be configured to have experience
--- similar to [tpope/vim-surround](https://github.com/tpope/vim-surround)
--- (see |MiniSurround-vim-surround-config|).
--- Features:
--- - Actions (text editing actions are dot-repeatable out of the box and
---   respect |[count]|) with configurable mappings:
---     - Add surrounding with `sa` (in visual mode or on motion).
---     - Delete surrounding with `sd`.
---     - Replace surrounding with `sr`.
---     - Find surrounding with `sf` or `sF` (move cursor right or left).
---     - Highlight surrounding with `sh`.
--- - Surrounding is identified by a single character as both "input" (in
---   `delete` and `replace` start, `find`, and `highlight`) and "output" (in
---   `add` and `replace` end):
---     - 'f' - function call (string of alphanumeric symbols or '_' or '.'
---       followed by balanced '()'). In "input" finds function call, in
---       "output" prompts user to enter function name.
---     - 't' - tag. In "input" finds tag with same identifier, in "output"
---       prompts user to enter tag name with possible attributes.
---     - All symbols in brackets '()', '[]', '{}', '<>". In "input' represents
---       balanced brackets (open - with whitespace pad, close - without), in
---       "output" - left and right parts of brackets.
---     - '?' - interactive. Prompts user to enter left and right parts.
---     - All other single character identifiers (supported by |getcharstr()|)
---       represent surrounding with identical left and right parts.
--- - Configurable search methods to find not only covering but possibly next,
---   previous, or nearest surrounding. See more in |MiniSurround.config|.
--- - All actions involving finding surrounding (delete, replace, find,
---   highlight) can be used with suffix that changes search method to find
---   previous/last. See more in |MiniSurround.config|.
--- Known issues which won't be resolved:
--- - Search for surrounding is done using Lua patterns (regex-like approach).
---   So certain amount of false positives should be expected.
--- - When searching for "input" surrounding, there is no distinction if it is
---   inside string or comment. So in this case there will be not proper match
---   for a function call: 'f(a = ")", b = 1)'.
--- - Tags are searched using regex-like methods, so issues are inevitable.
---   Overall it is pretty good, but certain cases won't work. Like self-nested
---   tags won't match correctly on both ends: '<a><a></a></a>'.
--- # Setup ~
--- This module needs a setup with `require('mini.surround').setup({})`
--- (replace `{}` with your `config` table). It will create global Lua table
--- `MiniSurround` which you can use for scripting or manually (with
--- `:lua MiniSurround.*`).
--- See |MiniSurround.config| for `config` structure and default values.
--- You can override runtime config settings locally to buffer inside
--- `vim.b.minisurround_config` which should have same structure as
--- `MiniSurround.config`. See |mini.nvim-buffer-local-config| for more details.
--- To stop module from showing non-error feedback, set `config.silent = true`.
--- # Example usage ~
--- Regular mappings:
--- - `saiw)` - add (`sa`) for inner word (`iw`) parenthesis (`)`).
--- - `saiw?[[<CR>]]<CR>` - add (`sa`) for inner word (`iw`) interactive
---   surrounding (`?`): `[[` for left and `]]` for right.
--- - `2sdf` - delete (`sd`) second (`2`) surrounding function call (`f`).
--- - `sr)tdiv<CR>` - replace (`sr`) surrounding parenthesis (`)`) with tag
---   (`t`) with identifier 'div' (`div<CR>` in command lin
8BD0
e prompt).
--- - `sff` - find right (`sf`) part of surrounding function call (`f`).
--- - `sh}` - highlight (`sh`) for a brief period of time surrounding curly
---   brackets (`}`).
--- Extended mappings (temporary force "prev"/"next" search methods):
--- - `sdnf` - delete (`sd`) next (`n`) function call (`f`).
--- - `srlf(` - replace (`sr`) last (`l`) function call (`f`) with padded
---   bracket (`(`).
--- - `2sfnt` - find (`sf`) second (`2`) next (`n`) tag (`t`).
--- - `2shl}` - highlight (`sh`) last (`l`) second (`2`) curly bracket (`}`).
--- # Comparisons ~
--- - [tpope/vim-surround](https://github.com/tpope/vim-surround):
---     - 'vim-surround' has completely different, with other focus set of
---       default mappings, while 'mini.surround' has a more coherent set.
---     - 'mini.surround' supports dot-repeat, customized search path (see
---       |MiniSurround.config|), customized specifications (see
---       |MiniSurround-surrounding-specification|) allowing usage of tree-sitter
---       queries (see |MiniSurround.gen_spec.input.treesitter()|),
---       highlighting and finding surrounding, "last"/"next" extended
---       mappings. While 'vim-surround' does not.
--- - [machakann/vim-sandwich](https://github.com/machakann/vim-sandwich):
---     - Both have same keybindings for common actions (add, delete, replace).
---     - Otherwise same differences as with 'tpope/vim-surround' (except
---       dot-repeat because 'vim-sandwich' supports it).
--- - [kylechui/nvim-surround](https://github.com/kylechui/nvim-surround):
---     - 'nvim-surround' is designed after 'tpope/vim-surround' with same
---       default mappings and logic, while 'mini.surround' has mappings
---       similar to 'machakann/vim-sandwich'.
---     - 'mini.surround' has more flexible customization of input surrounding
---       (with composed patterns, region pair(s), search methods).
---     - 'mini.surround' supports |[count]| in both input and output
---       surrounding (see |MiniSurround-count-with-actions|) while
---       'nvim-surround' doesn't.
---     - 'mini.surround' supports "last"/"next" extended mappings.
--- - |mini.ai|:
---     - Both use similar logic for finding target: textobject in 'mini.ai'
---       and surrounding pair in 'mini.surround'. While 'mini.ai' uses
---       extraction pattern for separate `a` and `i` textobjects,
---       'mini.surround' uses it to select left and right surroundings
---       (basically a difference between `a` and `i` textobjects).
---     - Some builtin specifications are slightly different:
---         - Quotes in 'mini.ai' are balanced, in 'mini.surround' they are not.
---         - The 'mini.surround' doesn't have argument surrounding.
---         - Default behavior in 'mini.ai' selects one of the edges into `a`
---           textobject, while 'mini.surround' - both.
--- # Highlight groups ~
--- - `MiniSurround` - highlighting of requested surrounding.
--- To change any highlight group, set it directly with |nvim_set_hl()|.
--- # Disabling ~
--- To disable, set `vim.g.minisurround_disable` (globally) or
--- `vim.b.minisurround_disable` (for a buffer) to `true`. Considering high
--- number of different scenarios and customization intentions, writing exact
--- rules for disabling module's functionality is left to user. See
--- |mini.nvim-disabling-recipes| for common recipes.
---@tag MiniSurround
--- This table describes all builtin surroundings along with what they
--- represent. Explanation:
--- - `Key` represents the surrounding identifier: single character which should
---   be typed after action mappings (see "Mappings" in |MiniSurround.config|).
--- - `Name` is a description of surrounding.
--- - `Example line` contains a string for which examples are constructed. The
---   `*` denotes the cursor position over `a` character.
--- - `Delete` shows the result of typing `sd` followed by surrounding identifier.
---   It aims to demonstrate "input" surrounding which is also used in replace
---   with `sr` (surrounding id is typed first), highlight with `sh`, find with
---   `sf` and `sF`.
--- - `Replace` shows the result of typing `sr!` followed by surrounding
---   identifier (with possible follow up from user). It aims to demonstrate
---   "output" surrounding which is also used in adding with `sa` (followed by
---   textobject/motion or in Visual mode).
--- Example: typing `sd)` with cursor on `*` (covers `a` character) changes line
--- `!( *a (bb) )!` into `! aa (bb) !`. Typing `sr!)` changes same initial line
--- into `(( aa (bb) ))`.
---  ┌───┬───────────────┬───────────────┬─────────────┬─────────────────┐
---  │Key│     Name      │  Example line │    Delete   │     Replace     │
---  ├───┴───────────────┴───────────────┴─────────────┴─────────────────┤
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │ ( │  Balanced ()  │ !( *a (bb) )! │  !aa (bb)!  │ ( ( aa (bb) ) ) │
---  │ [ │  Balanced []  │ ![ *a [bb] ]! │  !aa [bb]!  │ [ [ aa [bb] ] ] │
---  │ { │  Balanced {}  │ !{ *a {bb} }! │  !aa {bb}!  │ { { aa {bb} } } │
---  │ < │  Balanced <>  │ !< *a <bb> >! │  !aa <bb>!  │ < < aa <bb> > > │
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │ ) │  Balanced ()  │ !( *a (bb) )! │ ! aa (bb) ! │ (( aa (bb) ))   │
---  │ ] │  Balanced []  │ ![ *a [bb] ]! │ ! aa [bb] ! │ [[ aa [bb] ]]   │
---  │ } │  Balanced {}  │ !{ *a {bb} }! │ ! aa {bb} ! │ {{ aa {bb} }}   │
---  │ > │  Balanced <>  │ !< *a <bb> >! │ ! aa <bb> ! │ << aa <bb> >>   │
---  │ b │  Alias for    │ !( *a {bb} )! │ ! aa {bb} ! │ (( aa {bb} ))   │
---  │   │  ), ], or }   │               │             │                 │
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │ q │  Alias for    │ !'aa'*a'aa'!  │ !'aaaaaa'!  │ "'aa'aa'aa'"    │
---  │   │  ", ', or `   │               │             │                 │
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │ ? │  User prompt  │ !e * o!       │ ! a !       │ ee a oo         │
---  │   │(typed e and o)│               │             │                 │
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │ t │      Tag      │ !<x>*</x>!    │ !a!         │ <y><x>a</x></y> │
---  │   │               │               │             │ (typed y)       │
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │ f │ Function call │ !f(*a, bb)!   │ !aa, bb!    │ g(f(*a, bb))    │
---  │   │               │               │             │ (typed g)       │
---  ├┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┤
---  │   │    Default    │ !_a*a_!       │ !aaa!       │ __aaa__         │
---  │   │   (typed _)   │               │             │                 │
---  └┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┘
--- - All examples assume default `config.search_method`.
--- - Open brackets differ from close brackets by how they treat inner edge
---   whitespace: open includes it left and right parts, close does not.
--- - Output value of `b` alias is same as `)`. For `q` alias - same as `"`.
--- - Default surrounding is activated for all characters which are not
---   configured surrounding identifiers. Notes:
---     - Due to special handling of underlying `x.-x` Lua pattern
---       (see |MiniSurround-search-algorithm|), it doesn't really support
---       non-trivial `[count]` for "cover" search method.
---     - When cursor is exactly on the identifier character while there are
---       two matching candidates on both left and right, the one resulting in
---       region with smaller width is preferred.
---@tag MiniSurround-builtin-surroundings
--- Note: this is similar to |MiniAi-glossary|.
--- REGION ~
--- Table representing region in a buffer. Fields: <from> and <to> for
--- inclusive start and end positions (<to> might be `nil` to describe empty
--- region). Each position is also a table with line <line> and column <col>
--- (both start at 1). Examples: >lua
---   { from = { line = 1, col = 1 }, to = { line = 2, col = 1 } }
---   -- Empty region
---   { from = { line = 10, col = 10 } }
--- REGION PAIR ~
--- Table representing regions for left and right surroundings. Fields: <left>
--- and <right> with regions. Example: >lua
---     left  = { from = { line = 1, col = 1 }, to = { line = 1, col = 1 } },
---     right = { from = { line = 1, col = 3 } },
--- PATTERN ~
--- String describing Lua pattern.
--- Interval inside a string (end-exclusive). Like [1, 5). Equal `from` and `to` edges
--- describe empty span at that point.
--- Span `A = [a1, a2)` covers `B = [b1, b2)` if every element of `B` is within
--- `A` (`a1 <= b < a2`). It also is described as "B is nested inside A".
--- NESTED PATTERN ~
--- Array of patterns aimed to describe nested spans.
--- SPAN MATCHES NESTED PATTERN ~
--- If there is a sequence of consecutively nested spans each matching
--- corresponding pattern within substring of previous span (or input string
--- for first span). Example: >lua
---   -- Nested patterns for balanced `()` with inner space
---   { '%b()', '^. .* .$' }
---   -- Example input string (with columns underneath for easier reading):
---      "( ( () ( ) ) )"
---   --  12345678901234
--- Here are all matching spans [1, 15) and [3, 13). Both [5, 7) and [8, 10)
--- match first pattern but not second. All other combinations of `(` and `)`
--- don't match first pattern (not balanced).
--- COMPOSED PATTERN ~
--- Array with each element describing possible pattern (or array of them) at
--- that place. Composed pattern basically defines all possible combinations of
--- nested pattern (their cartesian product). Examples:
--- 1. Either balanced `()` or balanced `[]` but both with inner edge space: >lua
---     -- Composed pattern
---     { { '%b()', '%b[]' }, '^. .* .$' }
---     -- Composed pattern expanded into equivalent array of nested patterns
---     { '%b()', '^. .* .$' } -- and
---     { '%b[]', '^. .* .$' }
--- 2. Either "balanced `()` with inner edge space" or "balanced `[]` with no
---    inner edge space", both with 5 or more characters: >lua
---     -- Composed pattern
---     { { { '%b()', '^. .* .$' }, { '%b[]', '^.[^ ].*[^ ].$' } }, '.....' }
---     -- Composed pattern expanded into equivalent array of nested patterns
---     { '%b()', '^. .* .$', '.....' } -- and
---     { '%b[]', '^.[^ ].*[^ ].$', '.....' }
--- SPAN MATCHES COMPOSED PATTERN ~
--- If it matches at least one nested pattern from expanded composed pattern.
---@tag MiniSurround-glossary
--- Surround specification is a table with keys:
--- - <input> - defines how to find and extract surrounding for "input"
---   operations (like `delete`). See more in "Input surrounding" section.
--- - <output> - defines what to add on left and right for "output" operations
---   (like `add`). See more in "Output surrounding" section.
--- Example of surround info for builtin `)` identifier: >lua
---     input = { '%b()', '^.().*().$' },
---     output = { left = '(', right = ')' }
--- # Input surrounding ~
--- Specification for input surrounding has a structure of composed pattern
--- (see |MiniSurround-glossary|) with two differences:
--- - Last pattern(s) should have two or four empty capture groups denoting
---   how the last string should be processed to extract surrounding parts:
---     - Two captures represent left part from start of string to first
---       capture and right part - from second capture to end of string.
---       Example: `a()b()c` defines left surrounding as 'a', right - 'c'.
---     - Four captures define left part inside captures 1 and 2, right part -
---       inside captures 3 and 4. Example: `a()()b()c()` defines left part as
---       empty, right part as 'c'.
--- - Allows callable objects (see |vim.is_callable()|) in certain places
---   (enables more complex surroundings in exchange of increase in configuration
---   complexity and computations):
---     - If specification itself is a callable, it will be called without
---       arguments and should return one of:
---         - Composed pattern. Useful for implementing user input. Example of
---           simplified variant of input surrounding for function call with
---           name taken from user prompt: >lua
---             function()
---               local left_edge = vim.pesc(vim.fn.input('Function name: '))
---               return { left_edge .. '%b()', '^.-%(().*()%)$' }
---             end
---         - Single region pair (see |MiniSurround-glossary|). Useful to allow
---           full control over surrounding. Will be taken as is. Example of
---           returning first and last lines of a buffer: >lua
---             function()
---               local n_lines = vim.fn.line('$')
---               return {
---                 left = {
---                   from = { line = 1, col = 1 },
---                   to = { line = 1, col = vim.fn.getline(1):len() }
---                 },
---                 right = {
---                   from = { line = n_lines, col = 1 },
---                   to = { line = n_lines, col = vim.fn.getline(n_lines):len() }
---                 },
---               }
---             end
---         - Array of region pairs. Useful for incorporating other instruments,
---           like treesitter (see |MiniSurround.gen_spec.input.treesitter()|). The
---           best region pair will be picked in the same manner as with composed
---           pattern (respecting options `n_lines`, `search_method`, etc.) using
---           output region (from start of left region to end of right region).
---           Example using edges of "best" line with display width more than 80: >lua
---             function()
---               local make_line_region_pair = function(n)
---                 local left = { line = n, col = 1 }
---                 local right = { line = n, col = vim.fn.getline(n):len() }
---                 return {
---                   left = { from = left, to = left },
---                   right = { from = right, to = right },
---               end
---               local res = {}
---               for i = 1, vim.fn.line('$') do
---                 if vim.fn.getline(i):len() > 80 then
---                   table.insert(res, make_line_region_pair(i))
---                 end
---               end
---               return res
---             end
---     - If there is a callable instead of assumed string pattern, it is expected
---       to have signature `(line, init)` and behave like `pattern:find()`.
---       It should return two numbers representing span in `line` next after
---       or at `init` (`nil` if there is no such span).
---       !IMPORTANT NOTE!: it means that output's `from` shouldn't be strictly
---       to the left of `init` (it will lead to infinite loop). Not allowed as
---       last item (as it should be pattern with captures).
---       Example of matching only balanced parenthesis with big enough width: >lua
---         {
---           '%b()',
---           function(s, init)
---             if init > 1 or s:len() < 5 then return end
---             return 1, s:len()
---           end,
---           '^.().*().$'
---         }
--- More examples: >lua
---   -- Pair of balanced brackets from set (used for builtin `b` identifier)
---   { { '%b()', '%b[]', '%b{}' }, '^.().*().$' }
---   -- Lua block string
---   { '%[%[().-()%]%]' }
--- See |MiniSurround.gen_spec| for function wrappers to create commonly used
--- surrounding specifications.
--- # Output surrounding ~
--- Specification for output can be either a table with <left> and <right> fields,
--- or a callable returning such table (will be called with no arguments).
--- Strings can contain new lines character "\n" to add multiline parts.
--- Examples: >lua
---   -- Lua block string
---   { left = '[[', right = ']]' }
---   -- Brackets on separate lines (indentation is not preserved)
---   { left = '(\n', right = '\n)' }
---   -- Function call
---   function()
---     local function_name = MiniSurround.user_input('Function name')
---     return { left = function_name .. '(', right = ')' }
---@tag MiniSurround-surrounding-specification
--- |[count]| is supported by all actions in the following ways:
--- - In add, two types of `[count]` is supported in Normal mode:
---   `[count1]sa[count2][textobject]`. The `[count1]` defines how many times
---   left and right parts of output surrounding will be repeated and `[count2]` is
---   used for textobject.
---   In Visual mode `[count]` is treated as `[count1]`.
---   Example: `2sa3aw)` and `v3aw2sa)` will result into textobject `3aw` being
---   surrounded by `((` and `))`.
--- - In delete/replace/find/highlight `[count]` means "find n-th surrounding
---   and execute operator on it".
---   Example: `2sd)` on line `(a(b(c)b)a)` with cursor on `c` will result into
---   `(ab(c)ba)` (and not in `(abcba)` if it would have meant "delete n times").
---@tag MiniSurround-count-with-actions
--- Search for the input surrounding relies on these principles:
--- - Input surrounding specification is constructed based on surrounding
---   identifier (see |MiniSurround-surrounding-specification|).
--- - General search is done by converting some 2d buffer region (neighborhood
---   of reference region) into 1d string (each line is appended with `\n`).
---   Then search for a best span matching specification is done inside string
---   (see |MiniSurround-glossary|). After that, span is converted back into 2d
---   region. Note: first search is done inside reference region lines, and
---   only after that - inside its neighborhood within `config.n_lines` (see
---   |MiniSurround.config|).
--- - The best matching span is chosen by iterating over all spans matching
---   surrounding specification and comparing them with "current best".
---   Comparison also depends on reference region (tighter covering is better,
---   otherwise closer is better) and search method (if span is even considered).
--- - Extract pair of spans (for left and right regions in region pair) based
---   on extraction pattern (last item in nested pattern).
--- - For |[count]| greater than 1, steps are repeated with current best match
---   becoming reference region. One such additional step is also done if final
---   region is equal to reference region.
--- - Iteration over all matched spans is done in depth-first fashion with
---   respect to nested pattern.
--- - It is guaranteed that span is compared only once.
--- - For the sake of increasing functionality, during iteration over all
---   matching spans, some Lua patterns in composed pattern are handled
---   specially.
---     - `%bxx` (`xx` is two identical characters). It denotes balanced pair
---       of identical characters and results into "paired" matches. For
---       example, `%b""` for `"aa" "bb"` would match `"aa"` and `"bb"`, but
---       not middle `" "`.
---     - `x.-y` (`x` and `y` are different strings). It results only in matches with
---       smallest width. For example, `e.-o` for `e e o o` will result only in
---       middle `e o`. Note: it has some implications for when parts have
---       quantifiers (like `+`, etc.), which usually can be resolved with
---       frontier pattern `%f[]`.
---@tag MiniSurround-search-algorithm
-- Module definition ==========================================================
local MiniSurround = {}
local H = {}
--- Module setup
---@param config table|nil Module config table. See |MiniSurround.config|.
---@usage >lua
---   require('mini.surround').setup() -- use default config
---   -- OR
---   require('mini.surround').setup({}) -- replace {} with your config table
MiniSurround.setup = function(config)
  -- Export module
  _G.MiniSurround = MiniSurround
  -- Setup config
  config = H.setup_config(config)
  -- Apply config
  H.apply_config(config)
  -- Define behavior
  H.create_autocommands()
  -- Create default highlighting
  H.create_default_hl()
--- Defaults ~
---@eval return MiniDoc.afterlines_to_code(MiniDoc.current.eval_section)
---@text # Mappings ~
--- `config.mappings` defines what mappings are set up for particular actions.
--- By default it uses "prefix style" left hand side starting with "s" (for
--- "surround"): `sa` - "surround add", `sd` - "surround delete", etc.
--- Note: if any of the mappings start with "s" (as is by default), it is mapped
--- to |<Nop>| to prevent accidental trigger of built-in |s| (can happen if there
--- is a long enough delay between pressing "s" and the next key). Use `cl` instead.
--- # Custom surroundings ~
--- User can define own surroundings by supplying `config.custom_surroundings`.
--- It should be a **table** with keys being single character surrounding
--- identifier (supported by |getcharstr()|) and values - surround specification
--- (see |MiniSurround-surrounding-specification|).
--- General recommendations:
--- - In `config.custom_surroundings` only some data can be defined (like only
---   `output`). Other fields will be taken from builtin surroundings.
--- - Function returning surround info at <input> or <output> fields of
---   specification is helpful when user input is needed (like asking for
---   function name). Use |input()| or |MiniSurround.user_input()|. Return
---   `nil` to stop any current surround operation.
--- - Keys should use character representation which can be |getcharstr()| output.
---   For example, `'\r'` and not `'<CR>'`.
--- Examples of using `config.custom_surroundings` (see more examples at
--- |MiniSurround.gen_spec|): >lua
---   local surround = require('mini.surround')
---   surround.setup({
---     custom_surroundings = {
---       -- Make `)` insert parts with spaces. `input` pattern stays the same.
---       [')'] = { output = { left = '( ', right = ' )' } },
---       -- Use function to compute surrounding info
---       ['*'] = {
---         input = function()
---           local n_star = MiniSurround.user_input('Number of * to find')
---           local many_star = string.rep('%*', tonumber(n_star) or 1)
---           return { many_star .. '().-()' .. many_star }
---         end,
---         output = function()
---           local n_star = MiniSurround.user_input('Number of * to output')
---           local many_star = string.rep('*', tonumber(n_star) or 1)
---           return { left = many_star, right = many_star }
---         end,
---       },
---   -- Create custom surrounding for Lua's block string `[[...]]`
---   -- Use this inside autocommand or 'after/ftplugin/lua.lua' file
---   vim.b.minisurround_config = {
---     custom_surroundings = {
---       s = {
---         input = { '%[%[().-()%]%]' },
---         output = { left = '[[', right = ']]' },
---       },
--- # Respect selection type ~
--- Boolean option `config.respect_selection_type` controls whether to respect
--- selection type when adding and deleting surrounding. When enabled:
--- - Linewise adding places surroundings on separate lines while indenting
---   surrounded lines ones.
--- - Deleting surroundings which look like they were the result of linewise
---   adding will act to revert it: delete lines with surroundings and dedent
---   surrounded lines ones.
--- - Blockwise adding places surroundings on whole edges, not only start and
---   end of selection. Note: it doesn't really work outside of text and in
---   presence of multibyte characters; and probably won't due to
---   implementation difficulties.
--- # Search method ~
--- Value of `config.search_method` defines how best match search is done.
--- Based on its value, one of the following matches will be selected:
--- - Covering match. Left/right edge is before/after left/right edge of
---   reference region.
--- - Previous match. Left/right edge is before left/right edge of reference
---   region.
--- - Next match. Left/right edge is after left/right edge of reference region.
--- - Nearest match. Whichever is closest among previous and next matches.
--- Possible values are:
--- - `'cover'` (default) - use only covering match. Don't use either previous or
---   next; report that there is no surrounding found.
--- - `'cover_or_next'` - use covering match. If not found, use next.
--- - `'cover_or_prev'` - use covering match. If not found, use previous.
--- - `'cover_or_nearest'` - use covering match. If not found, use nearest.
--- - `'next'` - use next match.
--- - `'previous'` - use previous match.
--- - `'nearest'` - use nearest match.
--- Note: search is first performed on the reference region lines and only
--- after failure - on the whole neighborhood defined by `config.n_lines`. This
--- means that with `config.search_method` not equal to `'cover'`, "previous"
--- or "next" surrounding will end up as search result if they are found on
--- first stage although covering match might be found in bigger, whole
--- neighborhood. This design is based on observation that most of the time
--- operation is done within reference region lines (usually cursor line).
--- Here is an example of how replacing `)` with `]` surrounding is done based
--- on a value of `'config.search_method'` when cursor is inside `bbb` word:
--- - `'cover'`:         `(a) bbb (c)` -> `(a) bbb (c)` (with message)
--- - `'cover_or_next'`: `(a) bbb (c)` -> `(a) bbb [c]`
--- - `'cover_or_prev'`: `(a) bbb (c)` -> `[a] bbb (c)`
--- - `'cover_or_nearest'`: depends on cursor position.
---   For first and second `b` - as in `cover_or_prev` (as previous match is
---   nearer), for third - as in `cover_or_next` (as next match is nearer).
--- - `'next'`:          `(a) bbb (c)` -> `(a) bbb [c]`. Same outcome for `(bbb)`.
--- - `'prev'`:          `(a) bbb (c)` -> `[a] bbb (c)`. Same outcome for `(bbb)`.
--- - `'nearest'`: depends on cursor position (same as in `'cover_or_nearest'`).
--- # Search suffixes ~
--- To provide more searching possibilities, 'mini.surround' creates extended
--- mappings force "prev" and "next" methods for particular search. It does so
--- by appending mapping with certain suffix: `config.mappings.suffix_last` for
--- mappings which will use "prev" search method, `config.mappings.suffix_next`
--- - "next" search method.
--- - It creates new mappings only for actions involving surrounding search:
---   delete, replace, find (right and left), highlight.
--- - All new mappings behave the same way as if `config.search_method` is set
---   to certain search method. They preserve dot-repeat support, respect |[count]|.
--- - Supply empty string to disable creation of corresponding set of mappings.
--- Example with default values (`n` for `suffix_next`, `l` for `suffix_last`)
--- and initial line `(aa) (bb) (cc)`.
--- - Typing `sdn)` with cursor inside `(aa)` results into `(aa) bb (cc)`.
--- - Typing `sdl)` with cursor inside `(cc)` results into `(aa) bb (cc)`.
--- - Typing `2srn)]` with cursor inside `(aa)` results into `(aa) (bb) [cc]`.
--- # Setup similar to 'tpope/vim-surround' ~
--- *MiniSurround-vim-surround-config*
--- This module is primarily designed after 'machakann/vim-sandwich'. To get
--- behavior closest to 'tpope/vim-surround' (but not identical), use this setup: >lua
---   require('mini.surround').setup({
---     mappings = {
---       add = 'ys',
---       delete = 'ds',
---       find = '',
---       find_left = '',
---       highlight = '',
---       replace = 'cs',
---       -- Add this only if you don't want to use extended mappings
---       suffix_last = '',
---       suffix_next = '',
---     search_method = 'cover_or_next',
---   -- Remap adding surrounding to Visual mode selection
---   vim.keymap.del('x', 'ys')
---   vim.keymap.set('x', 'S', [[:<C-u>lua MiniSurround.add('visual')<CR>]], { silent = true })
---   -- Make special mapping for "add surrounding for line"
---   vim.keymap.set('n', 'yss', 'ys_', { remap = true })
MiniSurround.config = {
  -- Add custom surroundings to be used on top of builtin ones. For more
  -- information with examples, see `:h MiniSurround.config`.
  custom_surroundings = nil,
  -- Duration (in ms) of highlight when calling `MiniSurround.highlight()`
  highlight_duration = 500,
  -- Module mappings. Use `''` (empty string) to disable one.
  mappings = {
    add = 'sa', -- Add surrounding in Normal and Visual modes
    delete = 'sd', -- Delete surrounding
    find = 'sf', -- Find surrounding (to the right)
    find_left = 'sF', -- Find surrounding (to the left)
    highlight = 'sh', -- Highlight surrounding
    replace = 'sr', -- Replace surrounding
    suffix_last = 'l', -- Suffix to search with "prev" method
    suffix_next = 'n', -- Suffix to search with "next&q
10BC8
uot; method
  -- Number of lines within which surrounding is searched
  n_lines = 20,
  -- Whether to respect selection type:
  -- - Place surroundings on separate lines in linewise mode.
  -- - Place surroundings on each line in blockwise mode.
  respect_selection_type = false,
  -- How to search for surrounding (first inside current line, then inside
  -- neighborhood). One of 'cover', 'cover_or_next', 'cover_or_prev',
  -- 'cover_or_nearest', 'next', 'prev', 'nearest'. For more details,
  -- see `:h MiniSurround.config`.
  search_method = 'cover',
  -- Whether to disable showing non-error feedback
  -- This also affects (purely informational) helper messages shown after
  -- idle time if user input is required.
  silent = false,
--minidoc_afterlines_end
-- Module functionality =======================================================
--- Add surrounding
--- No need to use it directly, everything is setup in |MiniSurround.setup()|.
---@param mode string Mapping mode (normal by default).
MiniSurround.add = function(mode)
  -- Needed to disable in visual mode
  if H.is_disabled() then return '<Esc>' end
  -- Get marks' positions based on current mode
  local marks = H.get_marks_pos(mode)
  -- Get surround info. Try take from cache only in not visual mode (as there
  -- is no intended dot-repeatability).
  local surr_info
  if mode == 'visual' then
    surr_info = H.get_surround_spec('output', false)
    surr_info = H.get_surround_spec('output', true)
  if surr_info == nil then return '<Esc>' end
  -- Extend parts based on provided `[count]` before operator (if this is not
  -- from dot-repeat and was done already)
  if not surr_info.did_count then
    local count = H.cache.count or vim.v.count1
    surr_info.left, surr_info.right = surr_info.left:rep(count), surr_info.right:rep(count)
    surr_info.did_count = true
  -- Add surrounding.
  -- Possibly deal with linewise and blockwise addition separately
  local respect_selection_type = H.get_config().respect_selection_type
  if not respect_selection_type or marks.selection_type == 'charwise' then
    -- Begin insert from right to not break column numbers
    -- Insert after the right mark (`+ 1` is for that)
    H.region_replace({ from = { line = marks.second.line, col = marks.second.col + 1 } }, surr_info.right)
    H.region_replace({ from = marks.first }, surr_info.left)
    -- Set cursor to be on the right of left surrounding
    H.set_cursor(marks.first.line, marks.first.col + surr_info.left:len())
  if marks.selection_type == 'linewise' then
    local from_line, to_line = marks.first.line, marks.second.line
    -- Save current range indent and indent surrounded lines
    local init_indent = H.get_range_indent(from_line, to_line)
    H.shift_indent('>', from_line, to_line)
    -- Put cursor on the start of first surrounded line
    H.set_cursor_nonblank(from_line)
    -- Put surroundings on separate lines
    vim.fn.append(to_line, init_indent .. surr_info.right)
    vim.fn.append(from_line - 1, init_indent .. surr_info.left)
  if marks.selection_type == 'blockwise' then
    -- NOTE: this doesn't work with mix of multibyte and normal characters, as
    -- well as outside of text lines.
    local from_col, to_col = marks.first.col, marks.second.col
    -- - Ensure that `to_col` is to the right of `from_col`. Can be not the
    --   case if visual block was selected from "south-west" to "north-east".
    from_col, to_col = math.min(from_col, to_col), math.max(from_col, to_col)
    for i = marks.first.line, marks.second.line do
      H.region_replace({ from = { line = i, col = to_col + 1 } }, surr_info.right)
      H.region_replace({ from = { line = i, col = from_col } }, surr_info.left)
    H.set_cursor(marks.first.line, from_col + surr_info.left:len())
--- Delete surrounding
--- No need to use it directly, everything is setup in |MiniSurround.setup()|.
MiniSurround.delete = function()
  -- Find input surrounding region
  local surr = H.find_surrounding(H.get_surround_spec('input', true))
  if surr == nil then return '<Esc>' end
  -- Delete surrounding region. Begin with right to not break column numbers.
  H.region_replace(surr.right, {})
  H.region_replace(surr.left, {})
  -- Set cursor to be on the right of deleted left surrounding
  local from = surr.left.from
  H.set_cursor(from.line, from.col)
  -- Possibly tweak deletion of linewise surrounding. Should act as reverse to
  -- linewise addition.
  if not H.get_config().respect_selection_type then return end
  local from_line, to_line = surr.left.from.line, surr.right.from.line
  local is_linewise_delete = from_line < to_line and H.is_line_blank(from_line) and H.is_line_blank(to_line)
  if is_linewise_delete then
    -- Dedent surrounded lines
    H.shift_indent('<', from_line, to_line)
    -- Place cursor on first surrounded line
    H.set_cursor_nonblank(from_line + 1)
    -- Delete blank lines left after deleting surroundings
    local buf_id = vim.api.nvim_get_current_buf()
    vim.fn.deletebufline(buf_id, to_line)
    vim.fn.deletebufline(buf_id, from_line)
--- Replace surrounding
--- No need to use it directly, everything is setup in |MiniSurround.setup()|.
MiniSurround.replace = function()
  -- Find input surrounding region
  local surr = H.find_surrounding(H.get_surround_spec('input', true))
  if surr == nil then return '<Esc>' end
  -- Get output surround info
  local new_surr_info = H.get_surround_spec('output', true)
  if new_surr_info == nil then return '<Esc>' end
  -- Replace by parts starting from right to not break column numbers
  H.region_replace(surr.right, new_surr_info.right)
  H.region_replace(surr.left, new_surr_info.left)
  -- Set cursor to be on the right of left surrounding
  local from = surr.left.from
  H.set_cursor(from.line, from.col + new_surr_info.left:len())
--- Find surrounding
--- No need to use it directly, everything is setup in |MiniSurround.setup()|.
MiniSurround.find = function()
  -- Find surrounding region
  local surr = H.find_surrounding(H.get_surround_spec('input', true))
  if surr == nil then return end
  -- Make array of unique positions to cycle through
  local pos_array = H.surr_to_pos_array(surr)
  -- Cycle cursor through positions
  local dir = H.cache.direction or 'right'
  H.cursor_cycle(pos_array, dir)
  -- Open 'enough folds' to show cursor
  vim.cmd('normal! zv')
--- Highlight surrounding
--- No need to use it directly, everything is setup in |MiniSurround.setup()|.
MiniSurround.highlight = function()
  -- Find surrounding region
  local surr = H.find_surrounding(H.get_surround_spec('input', true))
  if surr == nil then return end
  -- Highlight surrounding region
  local config = H.get_config()
  local buf_id = vim.api.nvim_get_current_buf()
  H.region_highlight(buf_id, surr.left)
  H.region_highlight(buf_id, surr.right)
  vim.defer_fn(function()
    H.region_unhighlight(buf_id, surr.left)
    H.region_unhighlight(buf_id, surr.right)
  end, config.highlight_duration)
--- Update `MiniSurround.config.n_lines` from user input
--- Mapping example: >lua
---   vim.keymap.set('n', 'sn', '<Cmd>lua MiniSurround.update_n_lines()<CR>')
MiniSurround.update_n_lines = function()
  local n_lines = MiniSurround.user_input('New number of neighbor lines', MiniSurround.config.n_lines)
  MiniSurround.config.n_lines = math.floor(tonumber(n_lines) or MiniSurround.config.n_lines)
--- Ask user for input
--- This is mainly a wrapper for |input()| which allows empty string as input,
--- cancelling with `<Esc>` and `<C-c>`, and slightly modifies prompt. Use it
--- to ask for input inside function custom surrounding (see |MiniSurround.config|).
MiniSurround.user_input = function(prompt, text)
  -- Major issue with both `vim.fn.input()` is that the only way to distinguish
  -- cancelling with `<Esc>` and entering empty string with immediate `<CR>` is
  -- through `cancelreturn` option (see `:h input()`). In that case the return
  -- of `cancelreturn` will mean actual cancel, which removes possibility of
  -- using that string. Although doable with very obscure string, this is not
  -- very clean.
  -- Overcome this by adding temporary keystroke listener.
  local on_key = vim.on_key or vim.register_keystroke_callback
  local was_cancelled = false
  on_key(function(key)
    if key == vim.api.nvim_replace_termcodes('<Esc>', true, true, true) then was_cancelled = true end
  end, H.ns_id.input)
  -- Ask for input
  -- NOTE: it would be GREAT to make this work with `vim.ui.input()` but I
  -- didn't find a way to make it work without major refactor of whole module.
  -- The main issue is that `vim.ui.input()` is designed to perform action in
  -- callback and current module design is to get output immediately. Although
  -- naive approach of
  -- `local res; vim.ui.input({...}, function(input) res = input end)`
  -- works in default `vim.ui.input`, its reimplementations can return from it
  -- immediately and proceed in main event loop. Couldn't find a relatively
  -- simple way to stop execution of this current function until `ui.input()`'s
  -- callback finished execution.
  local opts = { prompt = '(mini.surround) ' .. prompt .. ': ', default = text or '' }
  vim.cmd('echohl Question')
  -- Use `pcall` to allow `<C-c>` to cancel user input
  local ok, res = pcall(vim.fn.input, opts)
  vim.cmd([[echohl None | echo '' | redraw]])
  -- Stop key listening
  on_key(nil, H.ns_id.input)
  if not ok or was_cancelled then return end
  return res
--- Generate common surrounding specifications
--- This is a table with two sets of generator functions: <input> and <output>
--- (currently empty). Each is a table with function values generating
--- corresponding surrounding specification.
---@seealso |MiniAi.gen_spec|
MiniSurround.gen_spec = { input = {}, output = {} }
--- Treesitter specification for input surrounding
--- This is a specification in function form. When called with a pair of
--- treesitter captures, it returns a specification function outputting an
--- array of region pairs derived from <outer> and <inner> captures. It first
--- searches for all matched nodes of outer capture and then completes each one
--- with the biggest match of inner capture inside that node (if any). The result
--- region pair is a difference between regions of outer and inner captures.
--- In order for this to work, apart from working treesitter parser for desired
--- language, user should have a reachable language-specific 'textobjects'
--- query (see |vim.treesitter.query.get()|).
--- The most straightforward way for this is to have 'textobjects.scm' query
--- file with treesitter captures stored in some recognized path. This is
--- primarily designed to be compatible with plugin
--- 'nvim-treesitter/nvim-treesitter-textobjects', but can be used without it.
--- Two most common approaches for having a query file:
--- - Install 'nvim-treesitter/nvim-treesitter-textobjects'. It has curated and
---   well maintained builtin query files for many languages with a standardized
---   capture names, like `call.outer`, `call.inner`, etc.
--- - Manually create file 'after/queries/<language name>/textobjects.scm' in
---   your |$XDG_CONFIG_HOME| directory. It should contain queries with
---   captures (later used to define surrounding parts). See |lua-treesitter-query|.
--- To verify that query file is reachable, run (example for "lua" language,
--- output should have at least an intended file): >vim
---   :lua print(vim.inspect(vim.treesitter.query.get_files('lua','textobjects')))
--- Example configuration for function definition textobject with
--- 'nvim-treesitter/nvim-treesitter-textobjects' captures: >lua
---   local ts_input = require('mini.surround').gen_spec.input.treesitter
---   require('mini.surround').setup({
---     custom_surroundings = {
---       -- Use tree-sitter to search for function call
---       f = {
---         input = ts_input({ outer = '@call.outer', inner = '@call.inner' })
---       },

View remainder of file in raw view

FilesExpand file tree

surround.lua

Latest commit

History

surround.lua

File metadata and controls