8000 minix/minix/man/man1/flexdoc.1 at master · blackskygg/minix · GitHub
[go: up one dir, main page]

Skip to content

Latest commit

 

History

History
2442 lines (2229 loc) · 63.9 KB

flexdoc.1

File metadata and controls

2442 lines (2229 loc) · 63.9 KB
.TH FLEX 1 "26 May 1990" "Version 2.3"
.SH NAME
flexdoc - fast lexical analyzer generator
.SH SYNOPSIS
.B flex
.B [-bcdfinpstvFILT8 -C[efmF] -Sskeleton]
.I [filename ...]
.SH DESCRIPTION
.I flex
is a tool for generating
.I scanners:
programs which recognized lexical patterns in text.
.I flex
reads
the given input files, or its standard input if no file names are given,
for a description of a scanner to generate. The description is in
the form of pairs
of regular expressions and C code, called
.I rules. flex
generates as output a C source file,
.B lex.yy.c,
which defines a routine
.B yylex().
This file is compiled and linked with the
.B -lfl
library to produce an executable. When the executable is run,
it analyzes its input for occurrences
of the regular expressions. Whenever it finds one, it executes
the corresponding C code.
.SH SOME SIMPLE EXAMPLES
.LP
First some simple examples to get the flavor of how one uses
.I flex.
The following
.I flex
input specifies a scanner which whenever it encounters the string
"username" will replace it with the user's login name:
.nf
%%
username printf( "%s", getlogin() );
.fi
By default, any text not matched by a
.I flex
scanner
is copied to the output, so the net effect of this scanner is
to copy its input file to its output with each occurrence
of "username" expanded.
In this input, there is just one rule. "username" is the
.I pattern
and the "printf" is the
.I action.
The "%%" marks the beginning of the rules.
.LP
Here's another simple example:
.nf
int num_lines = 0, num_chars = 0;
%%
\\n ++num_lines; ++num_chars;
. ++num_chars;
%%
main()
{
yylex();
printf( "# of lines = %d, # of chars = %d\\n",
num_lines, num_chars );
}
.fi
This scanner counts the number of characters and the number
of lines in its input (it produces no output other than the
final report on the counts). The first line
declares two globals, "num_lines" and "num_chars", which are accessible
both inside
.B yylex()
and in the
.B main()
routine declared after the second "%%". There are two rules, one
which matches a newline ("\\n") and increments both the line count and
the character count, and one which matches any character other than
a newline (indicated by the "." regular expression).
.LP
A somewhat more complicated example:
.nf
/* scanner for a toy Pascal-like language */
%{
/* need this for the call to atof() below */
#include <math.h>
%}
DIGIT [0-9]
ID [a-z][a-z0-9]*
%%
{DIGIT}+ {
printf( "An integer: %s (%d)\\n", yytext,
atoi( yytext ) );
}
{DIGIT}+"."{DIGIT}* {
printf( "A float: %s (%g)\\n", yytext,
atof( yytext ) );
}
if|then|begin|end|procedure|function {
printf( "A keyword: %s\\n", yytext );
}
{ID} printf( "An identifier: %s\\n", yytext );
"+"|"-"|"*"|"/" printf( "An operator: %s\\n", yytext );
"{"[^}\\n]*"}" /* eat up one-line comments */
[ \\t\\n]+ /* eat up whitespace */
. printf( "Unrecognized character: %s\\n", yytext );
%%
main( argc, argv )
int argc;
char **argv;
{
++argv, --argc; /* skip over program name */
if ( argc > 0 )
yyin = fopen( argv[0], "r" );
else
yyin = stdin;
yylex();
}
.fi
This is the beginnings of a simple scanner for a language like
Pascal. It identifies different types of
.I tokens
and reports on what it has seen.
.LP
The details of this example will be explained in the following
sections.
.SH FORMAT OF THE INPUT FILE
The
.I flex
input file consists of three sections, separated by a line with just
.B %%
in it:
.nf
definitions
%%
rules
%%
user code
.fi
The
.I definitions
section contains declarations of simple
.I name
definitions to simplify the scanner specification, and declarations of
.I start conditions,
which are explained in a later section.
.LP
Name definitions have the form:
.nf
name definition
.fi
The "name" is a word beginning with a letter or an underscore ('_')
followed by zero or more letters, digits, '_', or '-' (dash).
The definition is taken to begin at the first non-white-space character
following the name and continuing to the end of the line.
The definition can subsequently be referred to using "{name}", which
will expand to "(definition)". For example,
.nf
DIGIT [0-9]
ID [a-z][a-z0-9]*
.fi
defines "DIGIT" to be a regular expression which matches a
single digit, and
"ID" to be a regular expression which matches a letter
followed by zero-or-more letters-or-digits.
A subsequent reference to
.nf
{DIGIT}+"."{DIGIT}*
.fi
is identical to
.nf
([0-9])+"."([0-9])*
.fi
and matches one-or-more digits followed by a '.' followed
by zero-or-more digits.
.LP
The
.I rules
section of the
.I flex
input contains a series of rules of the form:
.nf
pattern action
.fi
where the pattern must be unindented and the action must begin
on the same line.
.LP
See below for a further description of patterns and actions.
.LP
Finally, the user code section is simply copied to
.B lex.yy.c
verbatim.
It is used for companion routines which call or are called
by the scanner. The presence of this section is optional;
if it is missing, the second
.B %%
in the input file may be skipped, too.
.LP
In the definitions and rules sections, any
.I indented
text or text enclosed in
.B %{
and
.B %}
is copied verbatim to the output (with the %{}'s removed).
The %{}'s must appear unindented on lines by themselves.
.LP
In the rules section,
any indented or %{} text appearing before the
first rule may be used to declare variables
which are local to the scanning routine and (after the declarations)
code which is to be executed whenever the scanning routine is entered.
Other indented or %{} text in the rule section is still copied to the output,
but its meaning is not well-defined and it may well cause compile-time
errors (this feature is present for
.I POSIX
compliance; see below for other such features).
.LP
In the definitions section, an unindented comment (i.e., a line
beginning with "/*") is also copied verbatim to the output up
to the next "*/". Also, any line in the definitions section
beginning with '#' is ignored, though this style of comment is
deprecated and may go away in the future.
.SH PATTERNS
The patterns in the input are written using an extended set of regular
expressions. These are:
.nf
x match the character 'x'
. any character except newline
[xyz] a "character class"; in this case, the pattern
matches either an 'x', a 'y', or a 'z'
[abj-oZ] a "character class" with a range in it; matches
an 'a', a 'b', any letter from 'j' through 'o',
or a 'Z'
[^A-Z] a "negated character class", i.e., any character
but those in the class. In this case, any
character EXCEPT an uppercase letter.
[^A-Z\\n] any character EXCEPT an uppercase letter or
a newline
r* zero or more r's, where r is any regular expression
r+ one or more r's
r? zero or one r's (that is, "an optional r")
r{2,5} anywhere from two to five r's
r{2,} two or more r's
r{4} exactly 4 r's
{name} the expansion of the "name" definition
(see above)
"[xyz]\\"foo"
the literal string: [xyz]"foo
\\X if X is an 'a', 'b', 'f', 'n', 'r', 't', or 'v',
then the ANSI-C interpretation of \\x.
Otherwise, a literal 'X' (used to escape
operators such as '*')
\\123 the character with octal value 123
\\x2a the character with hexadecimal value 2a
(r) match an r; parentheses are used to override
precedence (see below)
rs the regular expression r followed by the
regular expression s; called "concatenation"
r|s either an r or an s
r/s an r but only if it is followed by an s. The
s is not part of the matched text. This type
of pattern is called as "trailing context".
^r an r, but only at the beginning of a line
r$ an r, but only at the end of a line. Equivalent
to "r/\\n".
<s>r an r, but only in start condition s (see
below for discussion of start conditions)
<s1,s2,s3>r
same, but in any of start conditions s1,
s2, or s3
<<EOF>> an end-of-file
<s1,s2><<EOF>>
an end-of-file when in start condition s1 or s2
.fi
The regular expressions listed above are grouped according to
precedence, from highest precedence at the top to lowest at the bottom.
Those grouped together have equal precedence. For example,
.nf
foo|bar*
.fi
is the same as
.nf
(foo)|(ba(r*))
.fi
since the '*' operator has higher precedence than concatenation,
and concatenation higher than alternation ('|'). This pattern
therefore matches
.I either
the string "foo"
.I or
the string "ba" followed by zero-or-more r's.
To match "foo" or zero-or-more "bar"'s, use:
.nf
foo|(bar)*
.fi
and to match zero-or-more "foo"'s-or-"bar"'s:
.nf
(foo|bar)*
.fi
.LP
Some notes on patterns:
.IP -
A negated character class such as the example "[^A-Z]"
above
.I will match a newline
unless "\\n" (or an equivalent escape sequence) is one of the
characters explicitly present in the negated character class
(e.g., "[^A-Z\\n]"). This is unlike how many other regular
expression tools treat negated character classes, but unfortunately
the inconsistency is historically entrenched.
Matching newlines means that a pattern like [^"]* can match an entire
input (overflowing the scanner's input buffer) unless there's another
quote in the input.
.IP -
A rule can have at most one instance of trailing context (the '/' operator
or the '$' operator). The start condition, '^', and "<<EOF>>" patterns
can only occur at the beginning of a pattern, and, as well as with '/' and '$',
cannot be grouped inside parentheses. A '^' which does not occur at
the beginning of a rule or a '$' which does not occur at the end of
a rule loses its special properties and is treated as a normal character.
.IP
The following are illegal:
.nf
foo/bar$
<sc1>foo<sc2>bar
.fi
Note that the first of these, can be written "foo/bar\\n".
.IP
The following will result in '$' or '^' being treated as a normal character:
.nf
foo|(bar$)
foo|^bar
.fi
If what's wanted is a "foo" or a bar-followed-by-a-newline, the following
could be used (the special '|' action is explained below):
.nf
foo |
bar$ /* action goes here */
.fi
A similar trick will work for matching a foo or a
bar-at-the-beginning-of-a-line.
.SH HOW THE INPUT IS MATCHED
When the generated scanner is run, it analyzes its input looking
for strings which match any of its patterns. If it finds more than
one match, it takes the one matching the most text (for trailing
context rules, this includes the length of the trailing part, even
though it will then be returned to the input). If it finds two
or more matches of the same length, the
rule listed first in the
.I flex
input file is chosen.
.LP
Once the match is determined, the text corresponding to the match
(called the
.I token)
is made available in the global character pointer
.B yytext,
and its length in the global integer
.B yyleng.
The
.I action
corresponding to the matched pattern is then executed (a more
detailed description of actions follows), and then the remaining
input is scanned for another match.
.LP
If no match is found, then the
.I default rule
is executed: the next character in the input is considered matched and
copied to the standard output. Thus, the simplest legal
.I flex
input is:
.nf
%%
.fi
which generates a scanner that simply copies its input (one character
at a time) to its output.
.SH ACTIONS
Each pattern in a rule has a corresponding action, which can be any
arbitrary C statement. The pattern ends at the first non-escaped
whitespace character; the remainder of the line is its action. If the
action is empty, then when the pattern is matched the input token
is simply discarded. For example, here is the specification for a program
which deletes all occurrences of "zap me" from its input:
.nf
%%
"zap me"
.fi
(It will copy all other characters in the input to the output since
they will be matched by the default rule.)
.LP
Here is a program which compresses multiple blanks and tabs down to
a single blank, and throws away whitespace found at the end of a line:
.nf
%%
[ \\t]+ putchar( ' ' );
[ \\t]+$ /* ignore this token */
.fi
.LP
If the action contains a '{', then the action spans till the balancing '}'
is found, and the action may cross multiple lines.
.I flex
knows about C strings and comments and won't be fooled by braces found
within them, but also allows actions to begin with
.B %{
and will consider the action to be all the text up to the next
.B %}
(regardless of ordinary braces inside the action).
.LP
An action consisting solely of a vertical bar ('|') means "same as
the action for the next rule." See below for an illustration.
.LP
Actions can include arbitrary C code, including
.B return
statements to return a value to whatever routine called
.B yylex().
Each time
.B yylex()
is called it continues processing tokens from where it last left
off until it either reaches
the end of the file or executes a return. Once it reaches an end-of-file,
however, then any subsequent call to
.B yylex()
will simply immediately return, unless
.B yyrestart()
is first called (see below).
.LP
Actions are not allowed to modify yytext or yyleng.
.LP
There are a number of special directives which can be included within
an action:
.IP -
.B ECHO
copies yytext to the scanner's output.
.IP -
.B BEGIN
followed by the name of a start condition places the scanner in the
corresponding start condition (see below).
.IP -
.B REJECT
directs the scanner to proceed on to the "second best" rule which matched the
input (or a prefix of the input). The rule is chosen as described
above in "How the Input is Matched", and
.B yytext
and
.B yyleng
set up appropriately.
It may either be one which matched as much text
as the originally chosen rule but came later in the
.I flex
input file, or one which matched less text.
For example, the following will both count the
words in the input and call the routine special() whenever "frob" is seen:
.nf
int word_count = 0;
%%
frob special(); REJECT;
[^ \\t\\n]+ ++word_count;
.fi
Without the
.B REJECT,
any "frob"'s in the input would not be counted as words, since the
scanner normally executes only one action per token.
Multiple
.B REJECT's
are allowed, each one finding the next best choice to the currently
active rule. For example, when the following scanner scans the token
"abcd", it will write "abcdabcaba" to the output:
.nf
%%
a |
ab |
abc |
abcd ECHO; REJECT;
.|\\n /* eat up any unmatched character */
.fi
(The first three rules share the fourth's action since they use
the special '|' action.)
.B REJECT
is a particularly expensive feature in terms scanner performance;
if it is used in
.I any
of the scanner's actions it will slow down
.I all
of the scanner's matching. Furthermore,
.B REJECT
cannot be used with the
.I -f
or
.I -F
options (see below).
.IP
Note also that unlike the other special actions,
.B REJECT
is a
.I branch;
code immediately following it in the action will
.I not
be executed.
.IP -
.B yymore()
tells the scanner that the next time it matches a rule, the corresponding
token should be
.I appended
onto the current value of
.B yytext
rather than replacing it. For example, given the input "mega-kludge"
the following will write "mega-mega-kludge" to the output:
.nf
%%
mega- ECHO; yymore();
kludge ECHO;
.fi
First "mega-" is matched and echoed to the output. Then "kludge"
is matched, but the previous "mega-" is still hanging around at the
beginning of
.B yytext
so the
.B ECHO
for the "kludge" rule will actually write "mega-kludge".
The presence of
.B yymore()
in the scanner's action entails a minor performance penalty in the
scanner's matching speed.
.IP -
.B yyless(n)
returns all but the first
.I n
characters of the current token back to the input stream, where they
will be rescanned when the scanner looks for the next match.
.B yytext
and
.B yyleng
are adjusted appropriately (e.g.,
.B yyleng
will now be equal to
.I n
). For example, on the input "foobar" the following will write out
"foobarbar":
.nf
%%
foobar ECHO; yyless(3);
[a-z]+ ECHO;
.fi
An argument of 0 to
.B yyless
will cause the entire current input string to be scanned again. Unless you've
changed how the scanner will subsequently process its input (using
.B BEGIN,
for example), this will result in an endless loop.
.IP -
.B unput(c)
puts the character
.I c
back onto the input stream. It will be the next character scanned.
The following action will take the current token and cause it
to be rescanned enclosed in parentheses.
.nf
{
int i;
unput( ')' );
for ( i = yyleng - 1; i >= 0; --i )
unput( yytext[i] );
unput( '(' );
}
.fi
Note that since each
.B unput()
puts the given character back at the
.I beginning
of the input stream, pushing back strings must be done back-to-front.
.IP -
.B input()
reads the next character from the input stream. For example,
the following is one way to eat up C comments:
.nf
%%
"/*" {
register int c;
for ( ; ; )
{
while ( (c = input()) != '*' &&
c != EOF )
; /* eat up text of comment */
if ( c == '*' )
{
while ( (c = input()) == '*' )
;
if ( c == '/' )
break; /* found the end */
}
if ( c == EOF )
{
error( "EOF in comment" );
break;
}
}
}
.fi
(Note that if the scanner is compiled using
.B C++,
then
.B input()
is instead referred to as
.B yyinput(),
in order to avoid a name clash with the
.B C++
stream by the name of
.I input.)
.IP -
.B yyterminate()
can be used in lieu of a return statement in an action. It terminates
the scanner and returns a 0 to the scanner's caller, indicating "all done".
Subsequent calls to the scanner will immediately return unless preceded
by a call to
.B yyrestart()
(see below).
By default,
.B yyterminate()
is also called when an end-of-file is encountered. It is a macro and
may be redefined.
.SH THE GENERATED SCANNER
The output of
.I flex
is the file
.B lex.yy.c,
which contains the scanning routine
.B yylex(),
a number of tables used by it for matching tokens, and a number
of auxiliary routines and macros. By default,
.B yylex()
is declared as follows:
.nf
int yylex()
{
... various definitions and the actions in here ...
}
.fi
(If your environment supports function prototypes, then it will
be "int yylex( void )".) This definition may be changed by redefining
the "YY_DECL" macro. For example, you could use:
.nf
#undef YY_DECL
#define YY_DECL float lexscan( a, b ) float a, b;
.fi
to give the scanning routine the name
.I lexscan,
returning a float, and taking two floats as arguments. Note that
if you give arguments to the scanning routine using a
K&R-style/non-prototyped function declaration, you must terminate
the definition with a semi-colon (;).
.LP
Whenever
.B yylex()
is called, it scans tokens from the global input file
.I yyin
(which defaults to stdin). It continues until it either reaches
an end-of-file (at which point it returns the value 0) or
one of its actions executes a
.I return
statement.
In the former case, when called again the scanner will immediately
return unless
.B yyrestart()
is called to point
.I yyin
at the new input file. (
.B yyrestart()
takes one argument, a
.B FILE *
pointer.)
In the latter case (i.e., when an action
executes a return), the scanner may then be called again and it
will resume scanning where it left off.
.LP
By default (and for purposes of efficiency), the scanner uses
block-reads rather than simple
.I getc()
calls to read characters from
.I yyin.
The nature of how it gets its input can be controlled by redefining the
.B YY_INPUT
macro.
YY_INPUT's calling sequence is "YY_INPUT(buf,result,max_size)". Its
action is to place up to
.I max_size
characters in the character array
.I buf
and return in the integer variable
.I result
either the
number of characters read or the constant YY_NULL (0 on Unix systems)
to indicate EOF. The default YY_INPUT reads from the
global file-pointer "yyin".
.LP
A sample redefinition of YY_INPUT (in the definitions
section of the input file):
.nf
%{
#undef YY_INPUT
#define YY_INPUT(buf,result,max_size) \\
{ \\
int c = getchar(); \\
result = (c == EOF) ? YY_NULL : (buf[0] = c, 1); \\
}
%}
.fi
This definition will change the input processing to occur
one character at a time.
.LP
You also can add in things like keeping track of the
input line number this way; but don't expect your scanner to
go very fast.
.LP
When the scanner receives an end-of-file indication from YY_INPUT,
it then checks the
.B yywrap()
function. If
.B yywrap()
returns false (zero), then it is assumed that the
function has gone ahead and set up
.I yyin
to point to another input file, and scanning continues. If it returns
true (non-zero), then the scanner terminates, returning 0 to its
caller.
.LP
The default
.B yywrap()
always returns 1. Presently, to redefine it you must first
"#undef yywrap", as it is currently implemented as a macro. As indicated
by the hedging in the previous sentence, it may be changed to
a true function in the near future.
.LP
The scanner writes its
.B ECHO
output to the
.I yyout
global (default, stdout), which may be redefined by the user simply
by assigning it to some other
.B FILE
pointer.
.SH START CONDITIONS
.I flex
provides a mechanism for conditionally activating rules. Any rule
whose pattern is prefixed with "<sc>" will only be active when
the scanner is in the start condition named "sc". For example,
.nf
<STRING>[^"]* { /* eat up the string body ... */
...
}
.fi
will be active only when the scanner is in the "STRING" start
condition, and
.nf
<INITIAL,STRING,QUOTE>\\. { /* handle an escape ... */
...
}
.fi
will be active only when the current start condition is
either "INITIAL", "STRING", or "QUOTE".
.LP
Start conditions
are declared in the definitions (first) section of the input
using unindented lines beginning with either
.B %s
or
.B %x
followed by a list of names.
The former declares
.I inclusive
start conditions, the latter
.I exclusive
start conditions. A start condition is activated using the
.B BEGIN
action. Until the next
.B BEGIN
action is executed, rules with the given start
condition will be active and
rules with other start conditions will be inactive.
If the start condition is
.I inclusive,
then rules with no start conditions at all will also be active.
If it is
.I exclusive,
then
.I only
rules qualified with the start condition will be active.
A set of rules contingent on the same exclusive start condition
describe a scanner which is independent of any of the other rules in the
.I flex
input. Because of this,
exclusive start conditions make it easy to specify "mini-scanners"
which scan portions of the input that are syntactically different
from the rest (e.g., comments).
.LP
If the distinction between inclusive and exclusive start conditions
is still a little vague, here's a simple example illustrating the
connection between the two. The set of rules:
.nf
%s example
%%
<example>foo /* do something */
.fi
is equivalent to
.nf
%x example
%%
<INITIAL,example>foo /* do something */
.fi
.LP
The default rule (to
.B ECHO
any unmatched character) remains active in start conditions.
.LP
.B BEGIN(0)
returns to the original state where only the rules with
no start conditions are active. This state can also be
referred to as the start-condition "INITIAL", so
.B BEGIN(INITIAL)
is equivalent to
.B BEGIN(0).
(The parentheses around the start condition name are not required but
are considered good style.)
.LP
.B BEGIN
actions can also be given as indented code at the beginning
of the rules section. For example, the following will cause
the scanner to enter the "SPECIAL" start condition whenever
.I yylex()
is called and the global variable
.I enter_special
is true:
.nf
int enter_special;
%x SPECIAL
%%
if ( enter_special )
BEGIN(SPECIAL);
<SPECIAL>blahblahblah
...more rules follow...
.fi
.LP
To illustrate the uses of start conditions,
here is a scanner which provides two different interpretations
of a string like "123.456". By default it will treat it as
as three tokens, the integer "123", a dot ('.'), and the integer "456".
But if the string is preceded earlier in the line by the string
"expect-floats"
it will treat it as a single token, the floating-point number
123.456:
.nf
%{
#include <math.h>
%}
%s expect
%%
expect-floats BEGIN(expect);
<expect>[0-9]+"."[0-9]+ {
printf( "found a float, = %f\\n",
atof( yytext ) );
}
<expect>\\n {
/* that's the end of the line, so
* we need another "expect-number"
* before we'll recognize any more
* numbers
*/
BEGIN(INITIAL);
}
[0-9]+ {
printf( "found an integer, = %d\\n",
atoi( yytext ) );
}
"." printf( "found a dot\\n" );
.fi
Here is a scanner which recognizes (and discards) C comments while
maintaining a count of the current input line.
.nf
%x comment
%%
int line_num = 1;
"/*" BEGIN(comment);
<comment>[^*\\n]* /* eat anything that's not a '*' */
<comment>"*"+[^*/\\n]* /* eat up '*'s not followed by '/'s */
<comment>\\n ++line_num;
<comment>"*"+"/" BEGIN(INITIAL);
.fi
Note that start-conditions names are really integer values and
can be stored as such. Thus, the above could be extended in the
following fashion:
0